全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用：99美元
投递稿件

为什么选择我们？ >>
- 开源期刊
- 同行审议
- 快速出刊
- 终身存储
- 免费检索
- 免费推广
- 更多...
- 搜索引擎

西安交通大学学报

ISSN Print: 0253-987X

ISSN Online:

主页: http://zkxb.xjtu.edu.cn/

分享:




Go

遗址博物馆特殊环境温度场调控系统的设计及优化
Design and Optimization of Temperature Control System for Special Environment in Site Museums

王宇昂,路昭,罗昔联,孟祥兆,孙艳军,金立文

考虑间隙的弹塑性断路器弹簧操动机构动力学特性研究
Dynamic Characteristic Analysis on the Elastoplastic Spring Operating Mechanism of High Voltage Circuit Breaker with Clearance

孟凡刚,巫世晶,贾俊峰,张增磊,肖杨,李星

液氦/超流氦制冷系统负压换热器仿真及优化设计
Simulation and Optimization for Sub？？Atmospheric Heat Exchanger of Liquid Helium/Superfluid Helium Refrigeration System

王哲,厉彦忠,李正宇,龚领会

邻二甲苯、间二甲苯和对二甲苯表面张力的实验研究
Experimental Research on the Surface Tension of o-Xylene,m-Xylene and p-Xylene

赵康,毕胜山,吴江涛

机床滚转角高精度测量中的频偏现象研究
Analysis of Frequency Excursion in High-Precision Measurement of Machine Tool’s Roll Angle

余宝,王昭,黄军辉,齐静雅,李朝晖,郭俊杰

基于超临界CO2布雷顿循环的 塔式太阳能集热发电系统
A Towered Solar Thermal Power Plant Based on Supercritical CO2 Brayton Cycle

吴毅,王佳莹,王明坤,戴义平

直埋供热管道直角弯管热-力耦合分析
Thermal？？Mechanical Coupled Analysis for Right Angle Bend of Directly Buried Heating Pipeline

江超,官燕玲,邓顺熙,孟庆龙,石娟玲,曹宏麟

钛基体PbO2电极对靛蓝盐的电催化去除研究
Electrochemical Degradation of Indigo Salt by Titanium？？Based PbO2 Anode

张林,徐浩,冯江涛

滑动轴承润滑油膜厚度光纤动态精密检测模型
Optical Fiber Dynamic Precision Measuring Model for Lubricating Oil Film Thickness of Journal Bearings

张平,张小栋,董晓妮,赵妮,凌寒

平行轴渐开线变厚齿轮传动的 几何设计与啮合特性分析
Geometric Design and Meshing Characteristics Analysis of Beveloid Gear Transmission with Parallel Axes

倪高翔,朱才朝,宋朝省,刘怀举

控制参数对增压缸内直喷汽油机部分负荷下 微粒排放特性的影响
Effects of Control Parameters on the Particulate Emission Characteristics of Turbocharged Gasoline Direct Injection Engine under Part Load

钟兵,洪伟,苏岩,解方喜,韩林沛

一种利用起车过程瞬态振动响应的转子动力学参数识别方法
Method for Recognizing Kinetic Parameters of Rotor by Transient Vibration Response During Starting Process

张西宁,吴吉利,王奔

具有循环对称特点的耦合结构振动特性分析
Study on the Eigenvalue Problems of a Coupled Structure with Cyclic Symmetric Features

蔺彦虎,赵宁,彭艳军

烟气脱硝用尿素水解制氨工艺试验研究
Experimental Investigation on the Ammonia Production Process with Urea Hydrolysis for Flue Gas Denitration

张向宇,陆续,高宁,张波,向小凤,徐宏杰

铣刨机旋转多刀铣削阻力的数值计算
Numerical Calculation on Multi？？Tool Milling Resistance of Asphalt Pavement Milling Machine

汪学斌,胡永彪

用于三维形貌定量测量的调制电流式扫描离子电导显微镜
Three？？Dimensional Quantitative Surface Topography Measurement Using Modulated？？Current Based Scanning Ion Conductance Microscopy

郭仁飞,庄健,于德弘

复杂快中子源编码成像高效模拟方法研究
Highly Effective Simulation Strategy for Coded Imaging of the Complex Fast Neutron Source

张凤娜,张天奎,王东明,郑向阳,胡华四

帘式安全气囊有限元建模及侧碰撞系统仿真
Finite Element Modeling of Curtain Airbag and Simulation of Vehicle Side Impact

卢礼华,刘志峰,陆建辉,高发华,罗明军,张绍卫

面向大规模在线开放课程的编程题 多特征综合自动评分方法
An Automatic Scoring Method of Student Programs Using Multi？？Feature Analysis for Massive Open Online Courses

刘月霞,牛志尧,吴宁

面向众核系统的线程分组映射方法
A Grouping Mapping Mechanism of Threads on Many？？Core Systems

巨涛,张兴军,陈衡,董小社

用于柔性转子主动控制的等几何Timoshenko 梁模型及其数值验证
Isogeometric Timoshenko Beam Model and Numerical Verification for Active Vibration Control of Flexible Rotor

张鹏飞,王志恒,席光

移动中继协助下终端直通中的 模式选择和资源分配方案
Two Mode Selection and Resource Allocation Schedules for Device-to-Device Communication with Mobile Relay Assistance

朱正仓,赵季红,唐睿,曲桦,王璐瑶,曹照鑫

一种超低功耗的低压差线性稳压器环路补偿方法
A Loop Compensation Method of Low Dropout Regulator with Ultra Low Power

刘晨,来新泉,钟龙杰,杨伟

排气再循环与燃烧边界条件耦合对增压汽油机有效热效率的影响
Effect of Exhaust Gas Recirculation with Combustion Boundary Conditions on Thermal Efficiency of Turbocharged Port Fuel Injection Gasoline Engine

胡鹏,王伟,邓康耀,王孟轲

40Cr圆棒低应力剪切的激光旋切 环形槽理论与试验研究
Theoretical and Experimental Study on Laser Rotary Grooving for 40Cr Bar Low-Stress Shearing

董渊哲,赵升吨,崔敏超,霍权,任芋见

微波频段粗糙金属表面等效电导率的 数值计算及验证
A Numerical Method of Equivalent Electrical Conductivity of Rough Metal Surface at Microwave Frequency Band and Its Verification

王怡然,叶鸣,高凡,陈雄,贺永宁

利用开断模型分析引弧板对低压断路器 电弧运动的影响
Influence of Different Arc Run？？on End Tab on the Arc Movement Process of Low Voltage Circuit Breaker with Interruption Model

季良,刘颖异,周翔,苏玲,王家凯

连续收缩扩张气膜孔排冷却特性的数值模拟
Numerical Simulation for Cooling Characteristics with Continuous Arranged Converging Slot-Hole Rows

周骏飞,王新军,张峰

一种全双工物理层安全通信波束成形的低功耗方法
A Beam Forming Method for Secure Communications of Full Duplex Physical Layer

叶夏,朱丰超,高飞飞

仿海蟹机器人游泳足水动力学分析与实验研究
Hydrodynamic Analysis and Experimental Research on Swimming Leg of Crablike Robot

王海龙,王刚,陈曦,王立权,靳励行

用于机械系统固有频率及阻尼比计算的改进频域方法
A New Frequency？？Domain Algorithm to Calculate Natural Frequency and Damping Ratio of Mechanical Systems

孟庆虎,孟庆丰,朱永生,刁瑞朋

磨削弧区热源分布形状研究
Heat Source Profile in Grinding Zone

王德祥,葛培琪,毕文波,郑传栋

采用资源划分的云环境下Hadoop资源许可调度方法
A Resource License Scheduling Method for Hadoop in Cloud Computing Using Resource Allocation

周墨颂,朱正东,董小社,陈衡,王寅峰

HFE7000、HFE7200的表面张力和黏度实验研究
Experimental Research on the Surface Tension and Viscosity of HFE7000 and HFE7200

毕胜山,赵贯甲,吴江涛,孟现阳

采用随机矩阵的多扩展目标滤波器
A Multi？？Target Filter Based on Random Matrix

韩玉兰,朱洪艳,韩崇昭

核电站凝汽器的压力瞬态变化特性
Transient Characteristics of Pressure Variation in Condensers of Nuclear Power Station

王新军,周子杰,宋钊,鲁前奎,李家富

混合润滑状态下滤波减速器的啮合冲击分析与修形方法
Study on Meshing Impact and Modification Method of Filtering Reducer Considering Mixed Lubrication

褚坤明,王家序,蒲伟,周广武,张莹

传统缸内壁面传热模型在氢内燃机中的适用性
Applicability of Conventional Wall Heat Flux Models in Hydrogen Engines

杨振中,秦朝举,宋立业,原彦鹏

地脚螺栓蠕变松弛对大型数控机床 几何精度衰退的影响
Impact of Anchor Bolts Creep Relaxation on Geometric Accuracy Decline of Large Computer Numerical Control Machine Tools

刘海波,吴嘉锟,王永青

稀释气对高甲烷含量天然气燃烧特性的影响
Effects of Diluents on the Combustion Characteristics of Natural Gas with High Methane Content

汤成龙,司占博,张旭辉,张双,黄佐华

带叶片扩压器离心压缩机模型级内流研究
Internal Flow at Developed Model Stage in Centrifugal Compressor with Vaned Diffuser

周俊安,刘立军,肖萍,陈彦峰,郭江峰,陈雪江

喷嘴长宽比和雷诺数对旋流冷却流动与传热特性的影响
Effects of Jet Nozzle Aspect Ratio and Reynolds Number on Flow and Heat Transfer Characteristics of Vortex Cooling

杜长河,范小军,李亮,丰镇平

针对控制平面连通效能优化的控制器布置方法
A Placement Strategy of Controllers for Optimizing the Connectivity of Control Plane

王文博,汪斌强,王志明,陈飞宇,刘帅

汽车空调压缩机气阀运动规律模拟
Numerical Simulation of the Valve Motion in Automotive Air Conditioning Compressors

宋明毅,吴伟烽,李直

垂直上升内螺纹管中高压汽？菜？两相流截面含汽率的测量
Measurement of Void Fraction of High Pressure Steam Water Two？？Phase Flow in Vertical Upward Ribbed Tube

朱晓静,毕勤成

系泊型浮体运动的无网格法数值模型
Numerical Models of Moored Floating Bodies Using Meshless Method

曹文瑾,孙中国,席光

TBM的平面刀盘与两级刀盘的力学性能对比分析
Comparison of Mechanical Performances Between the Two？？Stage Cutterhead and the Flat？？Face Cutterhead for Rock Tunnel Boring Machine

耿麒,魏正英,孟昊,卓兴建,贾连辉,贺飞,楚华丽

全封闭R32滚动活塞压缩机的热分析
Thermal Analysis for Hermetic R32 Rolling Piston Compressor

吴建华,胡杰浩,陈昂,梅佩佩,周杏标,陈振华

带肋U型通道中的汽雾/空气流动与换热数值研究
Numerical Investigation for Flow and Heat Transfer Characteristics of Air/Mist Coolant in Ribbed Two？？Pass Channel

张峰,王新军,李军

球窝/球凸结构下的U型通道蒸汽冷却性能
Heat Transfer Performance in Steam-Cooled U-Shaped Channel with Concave/Convex Structure

李森,李亮,杜长河

Go




©2008-2020 OALib, Inc | Public user content licensed CC-BY 4.0 unless otherwise specified. OALib ISSN Online: 2333-9721 OALib ISSN Print: 2333-9705