All Title Author
Keywords Abstract

Publish in OALib Journal
ISSN: 2333-9721
APC: Only $99
Paper Submission

Why Us? >>
- Open Access
- Peer-reviewed
- Rapid publication
- Lifetime hosting
- Free indexing service
- Free promotion service
- More...
- Search engine friendly

固体力学学报

ISSN Print: 0254-7805

ISSN Online:

Website: http://manu39.magtech.com.cn/Jwk_gtlxxb/CN/article/showOldVolumn.do

Share:




Go

薄板弯曲分析的高阶高效无网格法
An Efficient High-order Meshfree Method for Thin Plate Bending Analysis

王冰冰,段庆林,李锡夔,张洪武,杨迪雄

几种变截面点阵承受面外压缩载荷的力学行为
MECHANICAL BEHAVIOR OF SEVERAL LATTICE WITH NON-UNIFORM LONGITUDINAL CROSS-SECTION UNDER OUT-OF-PLANE COMPRESSION LOAD

冀宾 顾铖璋 韩涵 宋林郁 吴春雷

Lamb波稀疏阵列CFRP层合板损伤成像检测
Damage imaging and testing in CFRP laminates based on Lamb wave sparse array

骆英 范敏 徐桂东 许伯强 Fuh-Gwo Yuan

非局部广义热弹性理论下半导体微结构中波的反射研究
Wave Reflection in Semiconductor Nanostructure under the Theory of Nonlocal Generalized Thermoelasticity

唐飞翔,宋亚勤

热环境下功能梯度夹层双曲壳三维自由振动分析
Three-dimensional free vibration of functionally graded sandwich doubly curved shell in thermal environment

曹洲,郝育新,顾晓军,李珍妮

沥青混合料车辙变形的离散元数值模拟
Discrete Element Numerical Simulation on Rutting Deformation of Asphalt Mixture

高虎,杨新华,唐鹏

改进的非概率可靠性全局最优解方法
Improved Global Optimization Method of Solving Non-probabilistic Reliability

陈旭勇, 游琛, 边晓亚, 樊建平

考虑塑性应变记忆恢复的循环棘轮本构模型研究
Cyclic ratcheting constitutive model considering plastic strain memory recovery

刘秀宇 董亚伟 肖雄

基于等几何分析的结构优化设计研究进展
Research Advances in Isogeometric Analysis-based？ Optimum Design of？Structural

刘宏亮,祝雪峰,杨迪雄

CFRP索斜拉桥的索-浅拱模型及面内自由振动分析
Cable-stayed Shallow-Arch Modeling and In-plane Free Vibration Analysis of Cable-stayed Bridge with CFRP Cables

康厚军,丛云跃,苏潇阳

考虑材料性能空间分布不确定性的可靠度拓扑优化

刘培硕,亢战

基于双向演化的局部水平集组合算法用于拓扑优化
Local-level-set-based Algorithm Combined with Bi-directional Evolutionary Feature Used for Topology Optimization

张文辉,郑福聪,程文婕,张耀庭

石墨烯裂纹扩展行为研究
Study on Crack Propagation Behavior of Graphene

刘秦龙 华军 李东波 段志荣 肖攀 陈垣欣

金属玻璃的微结构、增韧与疲劳问题研究进展
Microstructure model, toughening and fatigue of metallic glasses: A review

沙振东 滕云 刘子顺 王铁军

基于LS-DYNA的热成型钢断裂失效预测研究
Simulation of Boundary Conditions at a Wettable Solid Wall Based on the SPH Method

王栋,刘淼,王光耀,周会锋,李碧浩,丁海建,王大志

基于表面图像分析推演钢绞线腐蚀疲劳损伤行为
？

杨世聪,张劲泉,姚国文

小群簇下特异性粘附界面力学性质的统计分析
Statistic Analysis of the Mechanical Properties of the Specific Adhesion via Small Molecular Bond Clusters

李凯 李珑 王记增

平面波任意角度入射时波动散射问题输入的一种实现方法
？

陈少林, 宗娟

含功能梯度材料加强环的任意几何形状孔附近应力集中分析

杨权权,李芸,裴旭,陈中

多尺度复合材料力学研究进展
Research Progress in Multi-scale Mechanics of Composite Materials

陈玉丽, 马勇, 潘飞, 王升涛

零泊松比手风琴蜂窝等效模量
Equivalent Moduli of Accordion Honeycomb with Zero Poisson’s Ratio

刘卫东,李虹林

广义有限差分法求解Kirchhoff和Winkler薄板弯曲问题
Generalized finite difference method for solving Kirchhoff plate and Winkler plate bending problems

汤卓超 傅卓佳 范佳铭

边界受限下的轴向压缩超弹性圆管的失稳分析
Stability Analysis of an Axially Compressed Hyper-elastic Tube with Confined Boundary

宋晨颺,王晓,刘洋

考虑纤维断裂特征的Nb3Sn股线统计拉伸强度和失效概率
The Statistic Tensile Strength and Failure Probability of Nb3Sn Strands under Considering Filament Fragmentation Characteristics

罗威,李飞,王梅,田东方

考虑粗糙结合面弹塑性接触的黏滑摩擦建模
Stick-slip Friction Model for Elastic-plastic Contact of Rough Surfaces

张帆,王东,高通锋

金属材料三维断裂韧度厚度效应的有限元模拟
The Elucidation of Thickness Effect of Three-dimensional Fracture Toughness by Using the Finite Element Method

余力,吕俊男,杜伟,李群

基于SPH方法的湿润性固壁边界条件模拟研究
Simulation of Boundary Conditions at a Wettable Solid Wall Based on the SPH Method

王志超,李大鸣,李杨杨,牛娇

星型负泊松比多孔材料力学性能及应用研究
Mechanical Properties and Application of the Star-shaped Cellular Auxetic Material

吴秉鸿,张相闻,杨德庆

先进微制造力学
Advanced Manufacturing Mechanics on the Micro-/Nanoscale

刘泽

基于构型力内变量的界面损伤问题研究
Interface damage model with configurational forces as internal variables

陈悦 苑仲伯 左宏 李群

描述复合型疲劳裂纹扩展路径的等效模型
An Equivalent Model？of Mixed-mode Crack to Predict the Fatigue Growth Characteristics

赵翔,聂凯,朱涛,王峰会

激光激发表面波与亚表面缺陷作用的理论研究
Theoretical Study of the Interaction of Laser Excited Surface Acoustic Waves with Subsurface Defects

金磊,王威,潘永东

初应力条件下超临界CO2气爆致裂规律研究
Probe to the Fracture Mechanism Caused by Supercritical CO2 Explosion Under the Impact of Initial stress

孙可明 辛利伟 吴迪 王金彧

炭黑填充橡胶材料改进Mooney模型
AN AMENDED MOONEY MODEL OF CARBON BLACK FILLED RUBBER-LIKE MATERIALS

付宾 杨晓翔 李庆

连体结构基于时域显式法的瞬时最优控制算法
Instantaneous Optimal Control algorithm of Connected Structures based on Time Domain Explicit Method

李雪平 余超 苏成 何克晶

基于扰动状态概念的软岩蠕变本构模型与试验验证
Identification of the Creep Model and Its Parameters of Soft Rock on the Basis of Disturbed State Concept

黄明

电迁移诱发表面扩散下沿晶微裂纹的演化
The Evolution？of？Intergranular Microcracks due to Surface Diffusion Induced by Electromigration

杜杰锋,黄佩珍

薄钢板低周疲劳测试技术研究
STUDY ON LOW CYCLE FATIGUE TESTING TECHNOLOGY FOR THIN SHEET METAL

张水强 吴荣 张东升

一种求解瑞利波散射问题的修正边界元方法
A modified boundary element method for scattering problem of Rayleigh wave

笪益辉 王彬 钱征华

轻质金属泡沫夹芯曲板的抗爆炸冲击响应研究
Study on resistance of lightweight sandwich curve plates with metal foam core to blast loadings

秦庆华 张建勋 艾伟龙

波动钻压下阶梯钻柱系统稳定性研究
Dynamic Stability of a Stepped Drillstring System Subjected to Fluctuating Weight on Bit

赵广慧,唐松,梁政,李举

不同化学溶液下砂岩I型断裂韧度及其强度参数相关性的试验研究
Laboratory investigation on the mode-I fracture toughness and its correlation with strength characteristic of sandstone under the different chemical corrosion-rock interaction

韩铁林 师俊平 陈蕴生

二维材料纳米尺度摩擦行为及其机制
Friction of Two-dimensional Materials at the Nanoscale: Behavior and Mechanisms

李群仰,张帅,祁一洲,姚泉舟,黄月华

不同化学腐蚀下砂岩冻融力学特性劣化的试验研究
Laboratory investigations on the mechanical properties of sandstone in chemical corrosion under and freeze-thawing cycles

韩铁林 师俊平 陈蕴生

基于唯象相变理论的磁致伸缩材料耦合滞回动力学模拟
Modeling the Dynamical Hysteretic Behavior in Magnetostrictive Materials Based on Phenomenological Theory of Phase Transition

杜修全 王林翔 唐志峰 吕福在

饱和超固结黏性土的三剪弹塑性本构模型研究
The triple-shear elasto-plastic constitutive model for saturated over-consolidated clay

胡小荣 董肖龙 陈晓宇 胡勃阳

准脆性单晶材料动态压痕试验研究
Dynamic Indentation Experimental Investigations of Quasi-brittle Single Crystal

鲍小伟 吴艳青 黄风雷

基于Riesz势空间分数阶算子的非局部粘弹性力学元件
Nonlocal Viscoelastic Elements Based on Riesz Potential Space-fractional Operator

庞国飞,陈文

泡沫铝填充金属薄壁圆管侧向压缩的实验和理论
Experimental and Theoretical Study of Lateral Compression on Aluminium Foam-filled Thin-walled Metal Tubes

刘志芳,黄志超,路国运,秦庆华

负梯度闭孔泡沫金属的力学性能分析
？ Mechanical Properties of Closed-cell Metal Foam with Negative Density Gradient under Impact Loading

王江龙,王根伟

Go




©2008-2020 OALib, Inc | Public user content licensed CC-BY 4.0 unless otherwise specified. OALib ISSN Online: 2333-9721 OALib ISSN Print: 2333-9705