All Title Author
Keywords Abstract

Publish in OALib Journal
ISSN: 2333-9721
APC: Only $99
Paper Submission

Why Us? >>
- Open Access
- Peer-reviewed
- Rapid publication
- Lifetime hosting
- Free indexing service
- Free promotion service
- More...
- Search engine friendly

Open Journal of Composite Materials

ISSN Print: 2164-5612

ISSN Online: 2164-5655

Website: http://www.scirp.org/journal/ojcm

Share:




Go

A Decisive Study on Dielectric Response of Bi2O3/Polystyrene & Bi2O3/PVDF Composite as Flexible Electrodes for Energy Storage

Dinesh Kumar Yadav, Anju Yadav, Sushil Kumar Jain, Narendra Jakhar, Balram Tripathi

Fabrication and Characterization of Glass Fiber with SiC Reinforced Polymer Composites

Rajashekar Reddy Palle, Jens Schuster, Yousuf Pasha Shaik, Monis Kazmi

Incorporation of Clay into Natural Rubber (Hevea) for the Production of Tile Adhesive

Durand Hermann Ohouo, Conand Honoré Kouakou, Moro Olivier Boffoue, Edjikémé Eméruwa, Brahiman Traoré

Facile Preparation of Fluoroalkyl End-Capped Vinyltrimethoxysilane Oligomer/Sand Composites Possessing Superoleophilic/Superhydrophobic Characteristic: Application to Oil/Water Separation and Selective Removal of Fluorinated Aromatic Compounds from Aqueous Methanol Solution

Hideo Sawada, Kako Tono, Katsumi Yamashita

Wettability Control between Oleophobic/Superhydrophilic and Superoleophilic/Superhydrophobic Characteristics on the Modified Surface Treated with Fluoroalkyl End-Capped Oligomers/Micro-Sized Polystyrene Particle Composites

Hideo Sawada, Koki Arakawa, Yuta Aomi

Improving the Compatibility of Biodegradable Poly (Lactic Acid) Toughening with Thermoplastic Polyurethane (TPU) and Compatibilized Meltblown Nonwoven

Md Obaidur Rahman, Feichao Zhu, Bin Yu

The Equilibrium Moisture Content of Five Lesser Utilized Species of Ghana Contrasted with Three European Species

Gladys A. Quartey, John Frank Eshun, Emmanual Yaw Wereko

Development and Evaluation of the Mechanical Properties of Coconut Fibre Reinforced Low Density Polyethylene Composite

Ahmed Mohammed Bukar, Abubakar Mohammed El-Jummah, Abba Alhaji Hammajam

Influence of the Age of Bamboo Culm and Its Vertical Position on the Technological Properties of Bamboo Fibers: A Case of Bambusa vulgaris Species from Cameroonian Culture

Joseph Loic Souck, Theodore Tchotang, Bienvenu Kenmeugne

2D Fusion Simulations and Experimental Confirmations of Print Paths Using Composite Particles with Particle Method for Fused Filament Fabrication

Yuto Imaeda, Akira Todoroki, Ryosuke Matsuzaki, Masahito Ueda, Yoshiyasu Hirano

Experimental Investigation on the Thermal Properties of Gypsum Plaster-Rice Husk Ash Composite

Nuhu Caleb Amulah, Abubakar Mohammed El-Jummah, Abba Alhaji Hammajam, Usman Ibrahim

Manufacturing of 3D Printed Laminated Carbon Fibre Reinforced Nylon Composites: Impact Mechanics

Yohan Delporte, Hessam Ghasemnejad

Simple Measurement of Carbon Films on Copper Tubes and Their Effects on Corrosion

Takashi Iyasu, Motoki Kuratani, Itaru Ikeda, Noriyuki Tanaka, Yutaka Yamada, Osamu Sakurada

A Mini-Review and Perspective on Current Best Practice and Emerging Industry 4.0 Methods for Risk Reduction in Advanced Composites Manufacturing

Bryn Crawford, Hamid Khayyam, Abbas S. Milani

Development of Renewable Woodceramics Synthesized from Cashew Nuts Shell Oil

Toshihiro Okabe, Kouji Fukuda, Akito Takasaki, Kazuhiko Kakishita, Yuko Nishimoto, Yoshikazu Shinohara, Do Quang Minh, Phan Dinh Tuan, Ryoichi Yamamoto

Recipe Development and Mechanical Characterization of Carbon Fibre Reinforced Recycled Polypropylene 3D Printing Filament

Mwambe Polline, James M. Mutua, Thomas Ochuku Mbuya, Kyekyere Ernest

Chemical Modification on Woven Jute and Nonwoven Wet-Laid Glass Fiber Sheet Reinforced Poly-(ε-Caprolactone) Composites

Mohammad Muzammel Hossen, Mohammad Obaidur Rahman

Improvement in Impact Energy Absorption of UD-CFRP by Sub-Micron Glass Fiber into Its Matrix

Ryotaro Murayama, Kiyotaka Obunai, Kazuya Okubo, Li Bao

Low Density Linear Polyethylene Reinforced with Alkali and MAPE Treated Fibers from Coffee Pulp

Ahmat Tom, Abel Tame, Paul Nestor Djomou Djonga, Bakary Tigana Djonse Justin, Eugenie Géraldine Nga Abena

Morphological, Rheological and Mechanical Properties of Pla-Typha Based Biocomposites

Babacar Niang, Nicola Schiavone, Haroutioun Askanian, Diène Ndiaye, Vincent Verney

Deriving Tensile Properties of Glass Fiber Reinforced Polymers (GFRP) Using Mechanics of Composite Materials

Thomas I. Altanopoulos, Ioannis G. Raftoyiannis

Effect of Wood Waste on Acoustic and Magnetic Properties of Composite Bricks and Correlation between Sound Velocity and Magnetic Induction in These Bricks

Gilbert Ganga, Adolphe Kimbonguila Manounou, Narcisse Malanda, Michel Dzondo Gadet, Timothée Nsongo

The Reinforcing Effect of Graphene on the Mechanical Properties of Carbon-Epoxy Composites

Hadimani Shivakumar, N. M. Renukappa, K. N. Shivakumar, B. Suresha

Development of a Composite Material Based on Wood Waste Stabilized with Recycled Expanded Polystyrene

Serge Pacome Kaho, Koffi Clément Kouadio, Conand Honoré Kouakou, Edjikémé Eméruwa

Pyrolytic Recycling of Carbon Fibers from Prepregs and Their Use in Polyamide Composites

Stephan Schwarz, Thomas H？ftberger, Christoph Burgstaller, Andreas Hackl, Clemens Schwarzinger

Elaboration and Characterization of a Hybrid Composite Material with Two Particles of the Same Size: Coco Shells and Palm Shells

Pierre Marcel Anicet Noah, Ebanda Fabien Betene, Suzie Viviane Obame, Beassoum Allasra, Martin Christian Bindjeme, Ateba Atangana

Elaboration and Characterization of a Fiber Composite Material Made of Petioles of the Elaeis guineensis (Oil Palm)

Ze Eric Parfait, Tchotang Théodore, Souck Joseph Loic, Nfor Clins Wiryikfu, Pondi Joseph, Mpoung Léon Arnaud

Mechanical Properties of Bio-Based Epoxy Composites Reinforced with Hybrid-Interlayer Ramie and Recycled Carbon Fibres

Chenkai Zhu, Saihua Li, Xiaoye Cong, Xiaoling Liu

Exploring the Potential to Uniquely Manufacture Curved VARTM Epoxy Composites Using Cost-Effective FDM Molds

Syed Monis Raza Kazmi, Jens Schuster, Johannes Lutz

Influence of Water Ageing on Mechanical Properties of CaCO3 Filler Filled Epoxy Resin and Sansevieria/Carbon Fiber Reinforced Composites

Naveed Anjum, Bheemappa Suresha, Somanahally Lingaiah Ajit Prasad

Electronic Transport in Alloys with Phase Separation (Composites)

Joachim Sonntag, Bertrand Lenoir, Pawel Ziolkowski

Preparation of Fluoroalkyl End-Capped Oligomers/Hexagonal Boron Nitride Nanocomposites Possessing No Weight Loss Behavior in Nanocomposites Even after Calcination at 800°C

Jittraporn Saengkaew, Takahumi Ogasawara, Katsumi Yamashita, Suwadee Kongparakul, Hideo Sawada

On the Thermal Fatigue of a Room-Cured Neat Epoxy and Its Composite

Mbarka Mohamed, Michel Johnson, Farid Taheri

Experimental Investigation on the Properties of Recycled Concrete Using Hybrid Fibers

Salim Khoso, Janet Raad, Azadeh Parvin

Towards Reliability-Enhanced Mechanical Characterization of Non-Crimp Fabrics: How to Compare Two Force-Displacement Curves against a Null Material Hypothesis

Samia Sultana, Armin Rashidi, Mohammad Islam, Bryn Crawford, Abbas S. Milani

Transverse Impact Response Analysis of Graphene Panels: Impact Limits

Muhammed Burak Sonmez, Hessam Ghasemnejad, Hamad Kamran, Philip Webb

Synthesis and Fabrication of Graphene and Graphene Oxide: A Review

Adeniji Adetayo, Damilola Runsewe

Dynamic Modulus of Elasticity of Some Mortars Prepared from Selected Jordanian Masonry Cements

Hamadallah Al-Baijat

Inspection and Assessment of Highway Bridges in Jordan along the Desert Highway: A Case Study

Hamadallah Al-Baijat, Mohammad Alhawamdeh

Corrosion and Wear Behavior of Nano-Zirconium (Zr) Coated Commercial Grade Cast Iron by Sol-Gel and Plasma Spray Process

Joel Hemanth, Sara Sowjanya Steevenson

Enhancing the Mechanical Strength for a Microwave Absorption Composite Based on Graphene Nanoplatelet/Epoxy with Carbon Fibers

Maryam Jahan, Richard Osuemeshi Inakpenu, Kuo Li, Guanglin Zhao

Erratum to “Improvement on Adhesion Properties of Insert Injection Molding Composites: Effect of Inserted Parts, Adhesive Lengths and Injection Conditions” [Open Journal of Composite Materials (2017) 197-206]

Badin Pinpathomrat, Hiroyuki Hamada

Evaluation on Microstructure and Mechanical Behaviour of Al6061-Al2O3-Gr Hybrid Composites

Rajanna Manjunatha, Doddarasinakere Kempaiah Ravishankar, Govinda Panduranga Murthy Setty, Bengaluru Siddalingaiah Rakesh, Chalya Mallappaji Shiva Prasad, Rajesh Kumar

The Green Composites: Millet Husk Fiber (MHF) Filled Poly Lactic Acid (PLA) and Degradability Effects on Environment

Abba Alhaji Hammajam, Abubakar Mohammed El-Jummah, Zahari Nur Ismarrubie

Quasi-Static Flexural Properties of a Pultruded Glass Fiber/Unsaturated Polyester Square Pipe

Yuri Imai, Gabriel Fortin, Badin Pinpathomrat, Keigo Nishitani, Anin Memon, Yuqiu Yang, Akio Ohtani, Hiroyuki Hamada

Ultrasonic Testing Combined with Pattern Recognition for the Detection of Kissing Bonds

Jens Schuster, David Müller, Ming-Hong Chen, Quentin Govignon

A Survey on Effect of Agro Waste Ash as Reinforcement on Aluminium Base Metal Matrix Composites

Prasanna P. Kulkarni, B. Siddeswarappa, Kariyappla Shivashankar Hemanth Kumar

Performance Comparison of CVD Grown Carbon Nanofiber Based on Single- and Multi-Layer Graphene Oxides in Melt-Compounded PA6.6 Nanocomposites

Elcin Cakal Sarac, Leila Haghighi Poudeh, Jamal Seyyed Monfared Zanjani, Ilse Letofsky-Papst, Fevzi ？akmak Cebeci, Ismail Aydin, Yusuf Menceloglu, Burcu Saner Okan

Biomass-Based Composite Foam from Tapioca Starch/Octenyl Succinate Starch Blended with Alpha-Chitin

Manisara Phiriyawirut, Phatthanachai Hankham, Ratchanok Butsukhon, Udomporn Pongvichai

Relationship between the Initial Fracture Stress and Fatigue Limit—Simple Prediction Method of Tensile Fatigue Limit of Composite

Y. Imai, K. Nishitani, G. Fortin, A. Ohtani, H. Hamada

Go




©2008-2020 OALib, Inc | Public user content licensed CC-BY 4.0 unless otherwise specified. OALib ISSN Online: 2333-9721 OALib ISSN Print: 2333-9705