All Title Author
Keywords Abstract

Publish in OALib Journal
ISSN: 2333-9721
APC: Only $99
Paper Submission

Why Us? >>
- Open Access
- Peer-reviewed
- Rapid publication
- Lifetime hosting
- Free indexing service
- Free promotion service
- More...
- Search engine friendly

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077

ISSN Online: 2327-4085

Website: http://www.scirp.org/journal/jmmce

Share:




Go

Preparation and Characterization of Clay Soils for Applications in Cyanide Removal from Mining Wastewater

Raymond Kaboré, Yacouba Sanou, Rasmane Tiendrebéogo, Alassane Compaoré, Adama Konaté, Samuel Paré

Evaluation of the Effectiveness of Traditional and Nano Materials Used in Consolidation of Sandstone Used in Ramesses III Temple, Karnak, Egypt

Essam H. Mohamed, Zeinab Mahmoud Ahmed, Mahmoud L. Abd El-Latif

High Temperature Mechanical Properties of Additive Manufacturing CoCr F75 Alloy

Daniel Moreno, Yohanan Nachmana, Matan Zakai, Omer Hollander, Ishai Alon, Elinor Itzhak, Moshe Shapira

Valorization of Glass Bottles in the Manufacture of Fired Compressed Earth Bricks (CEB)

Talardja Diadi, Youssouf Sawadogo, Brahima Sorgho, Moustapha Sawadogo, Mohamed Seynou, Lamine Zerbo, Philippe Blanchart

Investigation of the Fermentation Mode of Rice Husk for the Stabilization of Earth Plaster

Nafissatou Savadogo, Yasmine Binta Traore, Nathael Lankoande, Philbert Nshimiyimana, Adamah Messan

Influence of Heavy Fuel Oil on the Thermo-Physical and Erodibility Properties of Earthen Materials

Ohindemi G. Yameogo, Donzala D. Some, Souleymane Ouedraogo, Philbert Nshimiyimana, Sié Kam, Dieudonné J. Bathiebo

Preliminary Study of Chemical Elements Distribution in Petroleum Source Rocks Donga and Yogou Formations of the Termit Sedimentary Basin (Est-Niger)

Alassane Ibrahim Maman Bachir, Abdoulaye Dan Makaou Oumarou, Baraou Idi Souley, Kouakou Alponse Yaou, Abdoulwahid Sani

Gold Mineralisation in the Intiédougou Prospect (Diébougou District) in Southwest Burkina Faso, West African Craton

Yao Honoré Koffi, Wendkouni Passecdé Pauline Zongo, Nanema Mathieu, Urbain Wenmenga

Optimisation of Thermal Comfort of Building in a Hot and Dry Tropical Climate: A Comparative Approach between Compressed Earth/Concrete Block Envelopes

Arnaud Louis Sountong-Noma Ouedraogo, Césaire Hema, Sjoerd Moustapha N’guiro, Philbert Nshimiyimana, Adamah Messan

Manufacture of Industrial Refractory Crucibles Based on Clays from Burkina Faso

Kassoum Barry, Youssouf Sawadogo, Moustapha Sawadogo, Brahima Sorgho, Mohamed Seynou, Boubié Guel, Philippe Blanchart, Lamine Zerbo

Influence of Non-Natural Ageing Temperature on the Microstructural Characteristics and Mechanical Properties of Cast Aluminum 6063 Alloy

Oluwole Oladele, Ayodele Adedeke, Olajesu Olanrewaju, Samuel Olusunle

Substitution of Aggregates in Concrete and Mortar with Coltan Mining Waste: Mechanical, Environmental, and Economic Impact Case Study

Alinabiwe Nyamuhanga Ally, élodie Ruffine Zang, Masika Muhiwa Grace, Manjia Marcelline Blanche, Ursula Joyce Merveilles Pettang Nana, Ngapgue Fran？ois, Bella Nabil, Chrispin Pettang

Thermal Performance Analysis of Plaster Reinforced with Raffia Vinifera Particles for Use as Insulating Materials in Building

Etienne Malbila, Danielle Manuella Djouego Tagne, Bouto Kossi Imbga, Lareba Adelaide Ouedraogo, Sié Kam, David Yemboini Kader Toguyeni

Metallurgical Microstructure Complexity in the Electron Beam Welding (EBW) Joint of Ti6246

Daniel Moreno, Yohanan Nachmana, Roei Saraga, Tal Rokah, Denis Panchenco, Michael Mansano, Elinor Itzhaky, Moshe Shapira

Study of Iron Ore Processing Technology of Tamir Gol Deposit in Mongolia

Mаngal Delgermaa, Lkhagva Byambadorj, Ayurzana Purevdorj

CO2 Transformation at Controlled Temperature with Lithium Hydroxide Solution and Metallic Lithium

Elizabeth Teresita Romero-Guzmán, José Luis Iturbe-García

Detection of Partial and Extended Blockages: A Case Study of Edible Oil Pipeline System

Babatunde Victor Omidiji, Ayodele Abeeb Daniyan, Adeniyi Taiwo, Kunle Michael Oluwasegun

Measurement of the Level of Knowledge of the Sands Used in Constructions in Togo

Ezoba Nayo, Kossi Bollanigni Amey, Essé MawuléEdorh, Komla Assogba Kassegne

The Effect of External Pressure on Mechanical Properties of Aquamarine Gemstone Using First Principles Studies

Evarist Kahuluda, Pulapa Ventkata Kanaka Rao, Stanley Mwanga

Investigation of Carbonation of Concrete Based on Crushed Sand and Admixtures

Jacques Herve Koung à Bediang, Emmanuel Elat Assoua Moukete, Paul Djomou Djonga, Michel Mbessa

Ceramic Properties of Three Specimens of Alluvial Clays Used in Local Constructions from Mbouda Clay Deposit, West Cameroon

Philémon Zo’o Zame, Sylvain Kouayep Lawou, Philippe Samba Assomo, Audrey Erman Moutsou, Yannick Lontchi Dzoti, Véronique Kamgang Kabeyene Beyala

A Model of Physico-Mechanical Characterization of Sangaredi Bauxites and Related Rocks Taking into Account Their Litho-Genetic Type

Oumar Keita, Mory Diane

Portevin-Le Chatelier Effect in Additively Manufactured and As-Cast Inconel 939 Nickel-Based Superalloy

Moshe Nahmany, Daniel Moreno, Yohanan Nahmana, Mathan Zakai, Ariel Yehuda Cohen, Moshe Shapira, Roni Shneck

Peak Particle Velocity Predicting Equation Associated with the Propagation of Vibrations Induced by Blasting in a Mine and Impacts on the Physical Degradation of Houses: The Case of the Yaramoko Mine, Bagassi, Burkina Faso

Richard Zoundi, Antoine Béré, Joel Martial Balkoulga, Philibert Sawadogo

Revolutionizing Material Boundaries: High-Performance Diamond-Coated Steel via Long-Term MPCVD

Clyde Varner II, Angela Davis, Leslie Wilson, Padmaja Guggilla

Synthesis and Characterization of Gadolinium Oxide-Hematite Magnetic Ceramic Nanostructures

Sarah Glasser, Andrew J. Craig, Felicia Tolea, Mihaela Sofronie, Jennifer A. Aitken, Monica Sorescu

Wear Evaluation of Copper-Nickel-Aluminum Alloys under Extreme Conditions

Rene Guardian, Isai Rosales-Cadena, Constancio Diaz-Reyes, Juan Antonio Ruiz-Ochoa

Auxetics in Biomedical Applications: A Review

Sean Rose, Dexter Siu, JD Zhu, Reem Roufail

Physico-Chemical and Mineralogical Characterizations of Tchiky Clays (Thies, Senegal) for Pharmaceutical Uses

Rokhaya Sylla Gueye, Nango Gaye, Ousmane Ka, Mamadou Baldé, Adama Diedhiou, Ngoné Diouf, Samba F. Ndoye, Idrissa Ndoye, Yoro Tine, Rokhaya Gueye, Mouhamadou B. Diop, Matar Seck, Djibril Fall, Alassane Welé

State of Knowledge on Starch as an Alternative Solution to Petrochemical Resources—A Review

Jonas Peequeur Essome Mbang, Pierre Marcel Anicet Noah, Laurent Libog, Téclaire Ngoup, Michel Mbere Taoga, Fabien Betene Ebanda

Tennantite and Enargite Rejection in the Copper Flotation—A Mini-Review

Shiqing Zhou, Tengfei Li, Chao Wang, Zhiyong Tan, Xiaoqiang Guan, Haibin Li, Wei Zhang

Appraisal of Engineering Phases of a Mineral Asset: From Exploration to Mine Approval

Edmundo Tulcanaza

Developing Recipe from Local Ceramic Raw Materials for Making Crucibles in Ghana

Kofi Asante-Kyei, Alexander Addae, Ahmed Aflo

Physic, Chemical and Mineralogical Characterizations of Clays Used in the Making of Traditional Ceramics in the City of Katiola, C ôte d’Ivoire

Isabelle Linda He, Grah Patrick Atheba, N’guadi Blaise Allou, Patrick Drogui, My Ali El Khakani, Gildas Komenan Gbassi

Study on the Attack of Molten Silicates on Plasma-Sprayed Thermal Barrier Coatings

Roberto Fernando Martins, Karl Friehe, Cecília Chaves Guedes e Silva, Dolores Ribeiro Ricci Lazar, Ant？nio Augusto Couto, Carlos Roberto Camello Lima

Hydrogen Embrittlement of Nitrogenating Layer on Martensitic Alloys

Daniel Moreno, Yohanan Nachmana, Shimon Bashan, Barak Weizman, Denis Panchenko, Michael Mansano, Elinor Itzhak, Moshe Shapira

Carbides Formation in MarM247 Directional Solidified during Stress-Rupture Test at High Temperature

Daniel Moreno, Itzik Mizrahi, Yuri Lipkin, Vasiliy Zevin, Elinor Itzhak, Zion Harush

Determination of the Sound Absorption Capacity of Hydraulic Concrete Mixtures Added with Waste Tire Rubber

María Luisa Moguel Pacheco, Fermín Castillo Mejía, Yamilet Rodríguez Lazcano, Andrés Aguilar Negrete, Arturo Molina Ocampo, Jesús Mario Colín de la Cruz

Experimental and Numerical Study of Mechanical Behaviour of Fired Clay Bricks after Exposure to High Temperatures

Jean Calvin Bidoung, Léon Arnaud Mpoung, Jean Aimé Mbey, Jean Raymond Lucien Meva’a

Influence of the Partial Substitution of Industrial Clinker by Volcanic Lava Powder from Nyiragongo Volcano on the Physical Properties of Mortars

Seke Vangu Max, Clement Nzau Umba Di Mbudi, Makanzu Imwangana Fils, Seke Makunga Daudet, Efoto Eale Louis

Influence of the Partial Substitution of Bitumen by a Mixture of Sulphur and Tyre and Plastic Bottle Powders on the Behaviour of Bituminous Concrete

Parfait Isidore Mbenkoue Mbida, Déodonne Kunwufine, Charles Bwemba, Michel Mbessa

Physical Transformations of Agri-Food Products during Their Convective Drying: Characterization of the Contraction and Isotropicity of Okra

Kondia Honoré Ouoba, Abdou-Salam Ganame, Désiré Bama, Abdoul Salam Ibrango, Salifou Ouedraogo

Study and Modeling of the Grinding Kinetics of Reactive Rocks in a Cement Laboratory

Seke Vangu Max, Pongo Pongo Charles, Pongo Pongo Kalang Hochéà, Musuamba Kabengele Nathalie, Kisonga Manuku Eric, Mungyeko Bisulandu Baby-Jean Robert

Suitability of Suluu-Terek Basalt Deposits for Stone Casting

Zhanbolot Aidaraliev, Imiyla Rysbaeva, Rakhat Atyrova, Akimbek Abdykalykov, Baktygul Bekbolot Kyzy, Chynara Zholdoshova, Nematilla Sopubekov, Altynbek Kuduev, Iurii Dubinin, Zhypargul Abdullaeva

Synthesis, Growth and Characterization of Benzophenone Added Sodium Acid Phthalate Crystal—A Potential Material for Nonlinear Optical Applications

Anandaraj Louis, Jothi Lakshmanan

Fabrication, Characterization and Machining of Al6061 Reinforced with Red Mud Composite

Poorna Chandra, V. Ravi Kumar, R. Kiran, D. V. Ravi Kumar, C. R. Prakash Rao, R. Suresh

Comparative Study of the Reactivity of Clay Earth Materials for the Production of Compressed Earth Blocks in Ambient Conditions: Effect on Their Physico-Mechanical Performances

Tarmangue Dime, Seick Omar Sore, Philbert Nshimiyimana, Adamah Messan, Luc Courard

Development of Magnesium Fertilizer Replacing Kieserite from Bio-Physico-Chemical Activated Dolomite

Didiek Hadjar Goenadi, Laksmita Prima Santi, Donny Nugroho Kalbuadi

Recovery of Cassiterite and Topaz Minerals from an Old Metallurgical Dump, Eastern Desert of Egypt

Suzan Sami Ibrahim, Khaled Ezzat Yassin, Tawfik Refaat Boulos, Ayman Aly Hagrass

Characterization of the Clay Collected in the Locality of Dolisie in Congo-Brazzaville

Rarahu Nursie Mboho Oba, Grace Mazel Ifo, Erman Eloge Nzaba Madila, Flora Zita Mpissi Diamouangana, Thierry Vila, Mozalin Paul Foutou, Joseph-Marie Moutou

Go




©2008-2020 OALib, Inc | Public user content licensed CC-BY 4.0 unless otherwise specified. OALib ISSN Online: 2333-9721 OALib ISSN Print: 2333-9705