全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

Formulation and Physico-Mechanical Characterization of Bricks Composed of Recycled Thermoplastics and Toukra Soil

DOI: 10.4236/jmmce.2025.134007, PP. 95-106

Keywords: Characterization, Brick, Thermoplastic, Clay, Waste

Full-Text   Cite this paper   Add to My Lib

Abstract:

The recovery of thermoplastics has a major impact on our cities, both in terms of the environmental impact of waste disposal and the economic impact of its use in construction materials. The aim of this study is to manufacture bricks from recycled thermoplastics, more specifically low-density polyethylene (LDPE) packaging from households and landfill sites in the 9th arrondissement. The technological evolution that humanity has undergone in recent years has made a wide variety of building materials available, and the use of earth as a material will make use of certain secondary products known as additives. These additions may be of mineral, animal or vegetable origin, and also of low purchasing power, but create a very strong bond once they are combined. The main aim of the present work is to contribute to the characterization of bricks produced from thermoplastics and a soil sample taken from the bank of the Chari at Toukra in the 9th arrondissement of the capital, which are resistant to natural hazards such as bad weather and flooding, which always cause enormous losses with each passing season. The results of the various tests carried out show that the material can help to overcome not only the lack of mechanical strength, but also the impermeability that is the cause of the deterioration and ruin of the building in clay without any addition modifying its properties.

References

[1]  Malanda, N., et al. (2017) Study of the Mechanical Characteristics of a Stabilized Earth Brick Using Sugar Cane Molasses.
[2]  Adagbe, M.T. (2021) Use of Earth Reinforced with Rice Straw Stalks as a Material for the Load-Bearing Elements of Buildings Reinforced with the Ronier.
[3]  Ali, A., Benelmir, R., Tanguier, J.L. and Saleh, A. (2018) Mechanical Characteristics of N’Djamena Clay Stabilized by Gum Arabic.
[4]  Wetshondo Osomba, D. (2012) Characterization and valuation of clay materials in the Province of Kinshasa (DR Congo). Master’s Thesis, Wallonia-Europe University Academy.
[5]  Doublie, G. and Sorghum, O. (2009) Recovery of Plastic Bag Waste Application in Sub-Saharan Cities.
[6]  Shanmugavalli, B., Gowtham, K., Jeba Nalwin, P. and Eswara Moorthy, B. (2017) Reuse of Plastic Waste in Paver Blocks. International Journal of Engineering Research and, 6, 313-315.
https://doi.org/10.17577/ijertv6is020162
[7]  Standard NF P 94-056 (1996) Soils: Reconnaissance and Tests, Particle Size Analysis, Dry Sieving Method after Washing (NF P 94-056, 1996).
[8]  Standard NF P NF P 94-057 (1992) Soils: Reconnaissance and Tests, Particle Size Analysis, Sedimentometry Method (NF P 94-057, 1992).
[9]  Ndepete, C.P., Zaguy-Guerembo, R., Gbongo, A.M.D., Regakouzou, L.M., Namndouta, V.O.N. and Kpeou-Kolengue, J. (2022) Valorisation des déchets plastiques en maté-riaux de construction. European Scientific Journal, 18, 317-329.
https://doi.org/10.19044/esj.2022.v18n21p320
[10]  Brahiman, T. (2019) Development and Characterization of a Composite Structure (Sand and Recycled Plastic Waste): Improvement of Resistance by Clay Fillers. Master’s Thesis, University of Bourgogne Franche-Comté.
[11]  Guendouz, M., Debieb, F., Boukendakdji, O., Kadri, E.H., Bentchikou, M. and Soualhi, H. (2016) Use of Plastic Waste in Sand Concrete. Journal of Materials and Environmental Science, 7, 382-389.
[12]  Ganiron, T.U.J. (2014) Effect of Thermoplastic as Fine Aggregate to Concrete Mixture. International Journal of Advanced Science and Technology, 62, 31-42.
https://doi.org/10.14257/ijast.2014.62.03

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133