全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

Analysis of Thermal Conduction in the Machine Border Collapse: Numerical and Experimental Comparison

DOI: 10.4236/oalib.1105178, PP. 1-10

Subject Areas: Mathematical Analysis, Experimental Physics, Computer Engineering

Keywords: 3D Heat Transfer, Numerical Simulation, Finite Volumes Method

Full-Text   Cite this paper   Add to My Lib

Abstract

The success of a design of a machine manufacturing line is directly related to the efficiency in the use of raw material and components, requiring a total control of the process. In this work the numerical simulation was applied to analyze the conduction of heat transferred in the Edge gluing machine Smc1 and to validate the simulations with the temperature differences collected experimentally. These validations were performed with the collection of temperatures via thermal imaging, which provides greater accuracy of thermal conduction capture. The results obtained are similar in relation to certain points captured by thermal imaging. The thermal model analyzed represents proximity to the heat distribution during the use of the machine.

Cite this paper

Matos, G. F. and Miranda, D. A. D. (2019). Analysis of Thermal Conduction in the Machine Border Collapse: Numerical and Experimental Comparison. Open Access Library Journal, 6, e5178. doi: http://dx.doi.org/10.4236/oalib.1105178.

References

[1]  Oba, R. (2015) Simulation and Thermal Analysis of Tunnel Kiln Applied to the Ceramic Industry. Doctoral Thesis, Federal University of Santa Catarina, Florianópolis. (In Portuguese)
[2]  Oliveira, M.J. (2014) Thermal Modeling of the Linear Reciprocating Compressor Operating without Lubricating Oil. Master’s Dissertation, Federal University of Santa Catarina, Florianópolis. (In Portuguese)
[3]  Barban, L.M. (2014) Numerical-Computational Analysis of the Thermal Stresses Induced by Welding. Master’s Dissertation, Polytechnic School of the University of Sao Paulo, Sao Paulo. (In Portuguese)
[4]  Teixeira, R.R. (2006) Finite Element Modeling for Strain and Creep Analysis in Roller Compacted Concrete. Master’s Dissertation, Federal University of Paraná, Curitiba. (In Portuguese)
[5]  Eger, R.S. (2010) Modeling of Turbulent Flows under Alternating Rotation. Master’s Dissertation, Federal University of Santa Catarina, Florianópolis. (In Portuguese)
[6]  Barrios, A.N.S. (2013) Thermal Modeling for Temperature Evaluation in the Milling of Steels for Molds and Dies. Master’s Dissertation, University of the State of Sao Paulo, Sao Paulo. (In Portuguese)
[7]  Pereira, F.D.A.S., Freitas M.S., Silva, J.V.L. and Rosário, J.M. (2014) Study and Improvement of a Modeling Head by Molten Filament Deposition by Means of Thermal Analysis of Finite Elements. VIII National Congress of Mechanical Engineering, Uberlandia, 10 August 2014, 1-8.
http://www.swge.inf.br/PDF/CONEM2014-0305_12192.PDF
[8]  Smartmaq Industry and Trade of Machines.
https://smartmaq.com.br/maquinas-cat/coladeira-de-borda/

Full-Text


comments powered by Disqus

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133

WeChat 1538708413