|
高压喷水动力推进装置流场特性研究
|
Abstract:
本文采用数值模拟和试验研究对推力室推力特性进行了深入研究,分析了推力与推力室直径、推力室几何形状等参数的关系并进行优化设计,为提高推力、提高能量转换效率提供了理论基础。建立了推力室能量损失的数学模型,设置优化目标和约束条件,进行了优化设计,得到了推力室结构参数的设计原则和方法,并在试验系统上完成了试验研究。
This paper conducts an in-depth study of the thrust characteristics of the thrust chamber through numerical simulation and experimental research. It analyzes the relationship between thrust and parameters such as the diameter and geometry of the thrust chamber, and carries out optimization design to provide a theoretical foundation for enhancing thrust and improving energy conversion efficiency. A mathematical model for energy loss in the thrust chamber is established. Optimization goals and constraints are set, and an optimization design is performed to derive the design principles and methods for the structure parameters of the thrust chamber. Experimental research was conducted on a test system.
[1] | 丁江明. 船舶喷水推进技术国内外研究与应用现状[C]//中国造船工程学会船舶力学学术委员会, 水动力学重点实验室, 船舶振动噪声重点实验室, 江苏省绿色船舶重点实验室. 2013年船舶水动力学学术会议论文集. 2013: 17. |
[2] | 金实斌, 曹璞钰, 王洋. 非均匀进流下喷水推进泵进流速度场的数值分析[J]. 排灌机械工程学报, 2016, 34(2): 115-121. |
[3] | 史俊, 冯学东, 李光琛, 张文. 进口长度对船舶喷水推进器进水流道性能的影响[J]. 船海工程, 2016, 45(6): 81-84+88. |
[4] | 钱浩, 宋科委, 郭春雨, 龚杰. 喷水推进器流道对船舶阻力性能的影响[J]. 中国舰船研究, 2017, 12(2): 22-29. |
[5] | 金梦显. 喷水推进三体船阻力性能及流道优化研究[D]: [硕士学位论文]. 大连: 大连海事大学, 2016. |
[6] | 王祖华, 张锦岚. 基于大涡模拟的水下射流噪声计算方法分析[J]. 噪声与振动控制, 2017, 37(3): 47-51. |
[7] | 郭军, 陈作钢, 戴原星, 陈建平. 喷水推进器进流面获取方法研究及应用[J]. 上海交通大学学报, 2020, 54(1): 1-9. |