|
分光光度计测量准确度分析及修正
|
Abstract:
单光束紫外可见近红外分光光度计的测量误差大多是由硬件因素所造成的,优化硬件则会提高成本。针对以上问题,本文先分析了影响仪器测量准确度的因素,再通过软件算法的方式进行修正,提高测量精度。最后实验验证了影响仪器测量准确度因素分析的合理性以及软件修正方法的有效性。
The measurement errors of single beam UV-visible near-infrared spectrophotometer are mostly caused by hardware factors, and optimizing the hardware will increase the cost. In view of the above problems, this paper first analyzes the factors that affect the measurement accuracy of the instrument, and then revises the method of software algorithm to improve the measurement accuracy. Finally, the rationality of the analysis of factors affecting the measurement accuracy of the instrument and the validity of the software correction method are verified by experiments.
[1] | 倪一, 黄梅珍, 袁波, 等. 紫外可见分光光度计的发展与现状[J]. 现代科学仪器, 2004(3): 3-7, 11. |
[2] | 张超. 可见分光光度计氘灯电源的研制[D]: [硕士学位论文]. 长春: 吉林大学, 2009. |
[3] | 岳鹏, 楼明刚, 王伶, 等. 分光光度计及红外光谱仪在建筑材料检测领域的应用[J]. 化学建材, 2009, 25(1): 7-9. |
[4] | 郭清刚. 基于LM3S8962的荧光分光光度计测控系统设计与实现[D]: [硕士学位论文]. 天津: 天津理工大学, 2013. |
[5] | Ickert, S., Beck, S., Linscheid, M.W., et al. (2019) VUV Photo dissociation Induced by a Deuterium Lamp in an Ion Trap. Journal of the American Society for Mass Spectrometry, 30, 2114-2122. |
[6] | 晏健荣, 韩强. 基于VB6.0的自动分光光度计波长标定系统设计[J]. 自动化仪表, 2017, 38(1): 89-92. |
[7] | 李晓钟. 基于NET三层架构的分光光度计软件系统设计与实现[D]: [硕士学位论文]. 厦门: 厦门大学, 2017. |
[8] | 朱英, 和惠朋, 武晓博, 张学俊. 紫外可见分光光度计及其应用[J]. 化工中间体, 2012(11): 34-37. |
[9] | 陈建波, 林冠宇, 杨小虎. 单光束紫外分光光度计波长准确度分析与修正[J]. 仪表技术与传感器, 2023(2): 27-33. |
[10] | 赵安新, 汤晓君, 张钟华, 等. 优化Savitzky-Golay滤波器的参数及其在傅里叶变换红外气体光谱数据平滑预处理中的应用[J]. 光谱学与光谱分析, 2016, 36(5): 1340-1344. |
[11] | 马真, 马恩, 熊飞兵, 等. 动态移动最小二乘多项式平滑的拉曼全自动基线校正算法[J]. 应用激光, 2017, 37(4): 614-618. |
[12] | 蔡天净, 唐瀚. Savitzky-Golay平滑滤波器的最小二乘拟合原理综述[J]. 数字通信, 2011, 38(1): 63-68+82. |
[13] | 晏健荣. 基于物联网平台的紫外可见分光光度计自动测量系统研究[D]: [硕士学位论文]. 上海: 东华大学, 2017. |