|
|
3D打印医用聚醚醚酮临床应用现状和进展
|
Abstract:
聚醚醚酮具有优异的生物相容性，且与人体骨的力学性能相似，成为现今应用广泛的骨科植入材料。同时，随着3D打印技术的不断成熟，患者能够根据自身骨缺损处精确个性化定制所需的人工骨植入材料。本文简述了聚醚醚酮在口腔、人造骨关节、颌骨、颅骨等缺损修复的临床应用现状和进展，总结并提出3D打印医用聚醚醚酮在未来生物医学领域有待解决的问题和研究方向。
With excellent biocompatibility and similar mechanical properties to human bone, Poly ether-ether-ketone (PEEK) has become a widely used orthopedic implant material nowadays. At the same time, with the continuous maturity of 3D printing technology, patients can accurately customize the required artificial bone implant materials according to their own bone defects. In this paper, the clinical application status and progress of PEEK in oral cavity, artificial bone joint, jaw bone, skull and other defects were briefly reviewed, and the pending problems and research direction of 3D printing medical PEEK in biomedical field were summarized and proposed.
| [1] | Wang, Y., Müller, W.D., Rumjahn, A., Schmidt, F. and Schwitalla, A.D. (2021) Mechanical Properties of Fused Filament Fabricated PEEK for Biomedical Applications Depending on Additive Manufacturing Parameters. Journal of the Mechanical Behavior of Biomedical Materials, 115, Article ID: 104250. https://doi.org/10.1016/j.jmbbm.2020.104250 |
| [2] | 林柳兰, 周建勇. 3D打印聚醚醚酮及其复合材料修复骨缺损的应用现况[J]. 中国组织工程研究, 2020, 24(10): 1622-1628. |
| [3] | 赵靖,王笛, 刘继全, 李学军. 3D打印技术在医学领域应用的现状及问题[J]. 中国现代医学杂志, 2017, 27(12): 71-74. |
| [4] | Wong, K.C. (2016) 3D-Printed Patient-Specific Applications in Orthopedics. Orthopedic Research and Reviews, 8, 57-66. https://doi.org/10.2147/ORR.S99614 |
| [5] | 甘抗, 郭晶, 刘红. 聚醚醚酮口腔生物材料的研究进展[J]. 口腔颌面修复学杂志, 2014, 15(3): 172-175. |
| [6] | Mishra, S. and Chowdhary, R. (2019) PEEK Materials as an Alternative to Titanium in Dental Implants: A Systematic Review. Clinical Implant Dentistry and Related Research, 21, 208-222. https://doi.org/10.1111/cid.12706 |
| [7] | Bathala, L., Majeti, V., Rachuri, N., Singh, N. and Gedela, S. (2019) The Role of Polyether Ether Ketone (Peek) in Dentistry—A Review. Journal of Medicine and Life, 12, 5-9. |
| [8] | Alexakou, E., Damanaki, M., Zoidis, P., Bakiri, E., Mouzis, N., Smidt, G., et al. (2019) PEEK High Performance Polymers: A Review of Properties and Clinical Applications in Prosthodontics and Restorative Dentistry. European Journal of Prosthodontics and Restorative Dentistry, 27, 113-121. |
| [9] | Sch？nhoff, L.M., Mayinger, F., Eichberger, M., Reznikova, E. and Stawarczyk, B. (2021) 3D Printing of Dental Restorations: Mechanical Properties of Thermoplastic Polymer Materials. Journal of the Mechanical Behavior of Biomedical Materials, 119, Article ID: 104544. https://doi.org/10.1016/j.jmbbm.2021.104544 |
| [10] | Han, X., Sharma, N., Xu, Z., Scheideler, L., Geis-Gerstorfer, J., Rupp, F., et al. (2019) An in Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants. Journal of Clinical Medicine, 8, Article No. 771. https://doi.org/10.3390/jcm8060771 |
| [11] | 王诗维, 王金雨, 李蓉, 杨建军, 张松梓. 3D打印聚醚醚酮在先天性缺牙患者修复中的应用价值[J]. 现代生物医学进展, 2021, 21(4): 764-768. |
| [12] | 陆伟, 冀堃, 丁玲, 陈晞, 吴国锋, 杨春成. 聚醚醚酮口腔修复体双色一体化3D打印技术的临床应用观察[C]//中华口腔医学会口腔修复学专业委员会第十四次全国口腔修复学学术会议. 广州: 中华口腔医学会, 2020: 57-58. |
| [13] | Honigmann, P., Sharma, N., Schumacher, R., Rueegg, J., Haefeli, M. and Thieringer, F. (2021) In-Hospital 3D Printed Scaphoid Prosthesis Using Medical-Grade Polyetheretherketone (PEEK) Biomaterial. BioMed Research International, 2021, Article ID: 1301028. https://doi.org/10.1155/2021/1301028 |
| [14] | 魏星辉, 范宏斌, 付军, 艾克拜尔·尤努斯, 刘冬, 田征, 等. 肩胛骨肿瘤切除3D打印聚醚醚酮个性化定制假体重建五例报告[J]. 中国骨与关节, 2021, 10(2): 122-127. |
| [15] | Chen, C., Yin, Y., Xu, H., Li, Z., Wang, F. and Chen, G. (2021) Personalized Three-Dimensional Printed Polyether-Ether-Ketone Prosthesis for Reconstruction after Subtotal Removal of Chronic Clavicle Osteomyelitis: A Case Report. Medicine, 100, Article ID: e25703. https://doi.org/10.1097/MD.0000000000025703 |
| [16] | Liu, D., Fu, J., Fan, H., Li, D., Dong, E., Xiao, X., et al. (2018) Application of 3D-Printed PEEK Scapula Prosthesis in the Treatment of Scapular Benign Fibrous Histiocytoma: A Case Report. Journal of Bone Oncology, 12, 78-82.
https://doi.org/10.1016/j.jbo.2018.07.012 |
| [17] | Kang, J., Wang, L., Yang, C., Wang, L., Yi, C., He, J., et al. (2018) Custom Design and Biomechanical Analysis of 3D-Printed PEEK Rib Prostheses. Biomechanics and Modeling in Mechanobiology, 17, 1083-1092.
https://doi.org/10.1007/s10237-018-1015-x |
| [18] | Zhang, C., Wang, L., Kang, J., Fuentes, O.M. and Li, D. (2020) Bionic Design and Verification of 3D Printed PEEK Costal Cartilage Prosthesis. Journal of the Mechanical Behavior of Biomedical Materials, 103, Article ID: 103561.
https://doi.org/10.1016/j.jmbbm.2019.103561 |
| [19] | Kang, J., Zhang, J., Zheng, J., Wang, L., Li, D. and Liu, S. (2021) 3D-Printed PEEK Implant for Mandibular Defects Repair—A New Method. Journal of the Mechanical Behavior of Biomedical Materials, 116, Article ID: 104335.
https://doi.org/10.1016/j.jmbbm.2021.104335 |
| [20] | Guo, F., Huang, S., Hu, M., Yang, C., Li, D. and Liu, C. (2021) Biomechanical Evaluation of a Customized 3D-Printed Polyetheretherketone Condylar Prosthesis. Experimental and Therapeutic Medicine, 21, Article No. 348.
https://doi.org/10.3892/etm.2021.9779 |
| [21] | Tasopoulos, T., Chatziemmanouil, D., Kouveliotis, G., Karaiskou, G., Wang, J. and Zoidis, P. (2020) PEEK Maxillary Obturator Prosthesis Fabrication Using Intraoral Scanning, 3D Printing, and CAD/CAM. The International Journal of Prosthodontics, 33, 333-340. https://doi.org/10.11607/ijp.6575 |
| [22] | Ding, L., Chen, X., Zhang, J., Wang, R. and Wu, G. (2021) Digital Fabrication of a Maxillary Obturator Prosthesis by Using a 3-Dimensionally-Printed Polyetheretherketone Framework. Journal of Prosthetic Dentistry, In Press.
https://doi.org/10.1016/j.prosdent.2021.04.002 |
| [23] | Manzoor, F., Golbang, A., Jindal, S., Dixon, D., McIlhagger, A., Harkin-Jones, E., et al. (2021) 3D Printed PEEK/HA Composites for Bone Tissue Engineering Applications: Effect of Material Formulation on Mechanical Performance and Bioactive Potential. Journal of the Mechanical Behavior of Biomedical Materials, 121, Article ID: 104601.
https://doi.org/10.1016/j.jmbbm.2021.104601 |
| [24] | 李会兵, 李永事, 李锐祥, 杨宝应. 3D打印引导聚醚醚酮在儿童颅骨缺损的应用[J]. 中国微侵袭神经外科, 2021, 26(6): 272-273. |
| [25] | 徐翔, 王举磊, 于洋, 宇应涛. 计算机辅助设计3D打印聚醚醚酮材料修复儿童颅骨缺损的应用[J]. 中国数字医学, 2021, 16(1): 74-78+82. |
| [26] | Barros, A., Brauge, D., Quéhan, R., Cavallier, Z., Roux, F.E. and Moyse, E. (2021) One-Step Customized PEEK Cranioplasty after 3D Printed Resection Template Assisted Surgery for a Frontal Intraosseous Meningioma: A Case Report. Turkish Neurosurgery, 31, 142-147. |
| [27] | Basgul, C., Yu, T., MacDonald, D.W., Siskey, R., Marcolongo, M. and Kurtz, S.M. (2018) Structure-Property Relationships for 3D Printed PEEK Intervertebral Lumbar Cages Produced Using Fused Filament Fabrication. Journal of Materials Research, 33, 2040-2051. https://doi.org/10.1557/jmr.2018.178 |
| [28] | Basgul, C., MacDonald, D.W., Siskey, R. and Kurtz, S.M. (2020) Thermal Localization Improves the Interlayer Adhesion and Structural Integrity of 3D Printed PEEK Lumbar Spinal Cages. Materialia, 10, Article ID: 100650.
https://doi.org/10.1016/j.mtla.2020.100650 |
