|
|
- 2016
积分时滞对象的一种内模PID鲁棒控制方法
|
Abstract:
摘要： 针对工业系统中常见的具有积分和时滞特性的过程对象,基于内模控制原理,将IMC-PID(internal model control-proportional integral derivative)控制器参数整定与鲁棒控制相结合,设计一种IMC-PID控制器参数的鲁棒整定方法。通过一阶环节逼近积分环节,采用泰勒公式逼近时滞项,推导得到IMC-PID控制器参数的设计公式。并基于鲁棒性能指标给出了简单的参数整定解析表达式,实现IMC-PID控制器的鲁棒整定。仿真结果表明,基于鲁棒性能指标的IMC-PID控制方法克服了常规方法中参数整定的盲目性,可使系统同时获得良好的动态响应性能和鲁棒性。
Abstract: For the integrated plus time delay in industrial system, a design and parameters tuning approach of internal model control PID(IMCPID)controller was proposed. The integrator in the model was replaced by a first-order lag, the steady-state performance of the system was improved, the time-delay term in the model was approached with the first-order Taylor expansion, and the design method of IMC-PID controller was founded. The analytical expression for robust tuning the adjustable parameter of the IMC-PID controller was derived based on the robustness index of the control system. The simulation results showed that the proposed method could provide a better dynamic performance and robustness against parameters perturbation, and the blindness of conventional method for controller parameter tuning was overcome
| [1] | CHEN Dan, SEBORG D E. PI/PID controller designbased on direct synthesis and disturbance rejection[J]. Ind Eng Chem Res, 2002, 41(19):4807-4822. |
| [2] | ALACNTARA S, ZHANG Weidong, PEDRET C, et al. IMC-like analytical <i>H<sub>∞</sub></i> design with S/SP mixed sensitivity consideration:utility in PIDtuning guidance[J].Journal of Process Control, 2011, 21(6):976-985. |
| [3] | YIN Chengqiang, HUI Hongzhong, YUE Jiguang, et al.Cascade control based on minimum sensitivity in outer loop for processes with time delay[J].Journal of Central South University, 2012, 19(9):2689-2696. |
| [4] | 张井岗,马文廷,赵志诚.串级时滞过程的二自由度Smith预估控制[J].山东大学学报(工学版),2015,45(5):43-50. ZHANG Jinggang, MA Wenting, ZHAO Zhicheng. Two-degree-of-freedom Smith predictor control for cascade time delay process[J].Journal of Shandong University(Engineering Science), 2015, 45(5):43-50. |
| [5] | LI Keyu. PID tuning for optimal closed-loop performance with specifiedgain and phase margins[J]. IEEE Trans on Control Systems Technology, 2013, 21(3):1024-1030. |
| [6] | RAO A S, RAO V S R, CHIDAMBRAM M. Direct synthesis-based controller design for integrating processes with time delay[J]. Journal of the Franklin Institute, 2009, 346(1): 38-56. |
| [7] | ZHAO Zhicheng, LIU Zhiyuan, ZHANG Jinggang. IMC-PID tuning method based on sensitivity specification for process with timedelay[J].Journal of Central South University of Technology, 2011, 18(4):1153-1160. |
| [8] | AHMAD Ali,SOMANATH Majhi. PID controller tuning for integrating processes[J]. ISA Transactions, 2010, 49(1):70-78. |
| [9] | SHAMSUZZOHA M, LEE M. IMC-PID controller design for improved disturbance rejection of time-delayed process[J]. Ind Eng Chem Res, 2007, 46(7):2077-2091. |
| [10] | 赵志诚,刘志远,张井岗.一种时滞过程内模PID控制器鲁棒整定方法[J].信息与控制,2010,39(5):526-530. ZHAO Zhicheng, LIU Zhiyuan, ZHANG Jinggang. A robust tuning method of internal model PID controller for process with time-delay[J].Information and Control, 2010, 39(5):526-530. |
| [11] | WANG Yagang, SHAO Huihe. PID auto-tuner based on sensitivity specification[J]. Chemical Engineering Research and Design, 2000, 78(2):312-316. |
