GONG Q M, ZHAO J, HEFNY A M. Numerical simulation of rock fragmentation process induced by two TBM cutters and cutter spacing optimization[J].Tunneling and Underground Space Technology,2006,21(3):1-8.
[2]
朱齐平,潘存治.全断面掘进机刀盘驱动转矩的确定[J].煤矿机电,2006(4):33-37.ZHU Qiping, PAN Cunzhi. The determination of TBM cutterhead driving torque [J]. Colliery Mechnical & Electrical Technology, 2006(4): 33-37.
[3]
水利部科技推广中心.全断面岩石掘进机[M].北京:石油工业出版社, 2005.Ministry of Water Resources and Technology Promotion center. Full face rock tunnel boring machine [M].Beijing: Petroleum Industry Press, 2005.
[4]
夏毅敏,卞章括,暨智勇,等.复合式土压平衡盾构刀盘CAD系统开发[J].计算机工程与应用, 2012,48(36):64-69.XIA Yimin, BIAN Zhangkuo, JI Zhiyong, et al. Development of cutterhead CAD system for composite EPB shield [J]. Computer Engineering and Applications, 2012, 48(36):64-69.
[5]
张鹏.TBM滚刀布置与刀盘结构参数优化设计研究[D].大连:大连理工大学, 2009.ZHANG Peng. Design and research on cutter layout and the structure parameters of the cutterhead optimization for TBM [D]. Dalian: Dalian University of Technology, 2009.
[6]
谭青,张魁,夏毅敏,等.TBM刀具三维破岩仿真[J]. 山东大学学报, 2009,12:72-77.TAN Qing, ZHANG Kui, XIA Yimin, et al. Three dimensional simulation of rock breaking by TBM cutter [J]. Journal of Shandong University. 2009, 12: 72-77.
[7]
苏翠侠,王燕群,蔡宗熙,等.盾构刀盘掘进载荷的数值模拟[J].天津大学学报,2011,6:522-528.SU Cuixia, WANG Yanqun, CAI Zongxi, et al. Numerical simulation of excavation load on cutterhead in shield tunneling machine [J]. Journal of Tianjin University, 2011, 6:522-528.
[8]
苏翠侠,蔡宗熙,王燕群,等.基于数值仿真的盾构刀盘载荷影响因素分析[J].机械设计与研究, 2012,8:66-69.SU Cuixia, CAI Zongxi, WANG Yanqun, et al. Analysis of influence factors on load of shield cutterhead based on numerical simulation [J]. Machine Design and Research, 2012, 8: 66-69.
[9]
余海东,丁昴,张凯之,等. 盾构机主轴回转支承轴承刚度及变形特性研究[J].中国机械工程,2011,22(4):452-457.YU Haidong,DING Mao,ZHANG Kaizhi,et al. Study on stiffness and deformation behavior of slewing bearing in shield machines [J]. China Mechanical Engineering,2011,22(4):452-457.
[10]
MARCINIEC A, TORSTENFELT B. Load Distribution in flexibly supported three-row roller slew bearings tribology transactions [J].Tribology Transactions, 1994, 37(4):757-762.
[11]
AMASORRAIN J I, SAGARTZAZU X, DAMIAN J. Load distribution in a four contact-point slewing bearing [J].Mechanism and Machine Theory,2003,38(6):479-481.
[12]
FOROUZAN M R, SALIMI M, GADALA M S. Three-dimensional FE analysis of ring rolling by employing thermal Spokes method [J]. International Journal of Mechanical Sciences,2003,45(12):1976-1977.
[13]
KANIA L. Modeling of rollers in calculation of slewing bearing with the use of finite elements[J].Mechanism and Machine Theory,2006,41(11):1359-1376.
[14]
CHAIB Z, DAIDIE A, LERAY D. Screw behavior in large diameter slewing bearing assemblies: numerical and experimental analysis [J]. International Journal on Interactive Design and Manufacturing, 2007, 1(1):1-21.
[15]
OLAVE M, SAGARTZAZU X, DAMIAN J, et al. Design of four contact-point slewing bearing with a new load distribution procedure to account for structural stiffness[J].Journal of Mechanical Design,2010,132(2):1-10.
[16]
刘丹丹.盾构机用三排滚柱式回转支承有限元分析[D].洛阳:河南科技大学, 2011. LIU Dandan. The FEA of three-row roller bearing used for tunnel shield [D]. Luoyang: Henan University of Science and Technology, 2011.
[17]
ROSTAMI J. Hard rock TBM cutterhead modeling for design and performance prediction [J]. Geomechanics and Tunnelling, 2008(1):18-28.
