全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2007 

液态树脂基材料与铜基材料的界面润湿现象分析

, PP. 61-64

Keywords: 环氧树脂,,接触角,附着功,润湿性

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用静滴法观察了液态树脂基材料与铜基材料的界面润湿现象,测定了298~363K温度范围内的接触角,计算了附着功.结果表明接触角随时间呈下降趋势,基板表面粗糙度对接触角的影响较大,在表面粗糙度较小时,接触角随时间下降较快,平衡接触角较小;初始接触角和平衡接触角均随树脂基材料中环氧树脂含量的增加而降低;升高温度使接触角的变化速率加快,加入树脂后的液体的平衡接触角对温度更加敏感;附着功随着时间的延长逐渐增加,但随着温度的上升而减小.

References

[1]  王春青,李明雨,田艳红,等.JISZ3198无铅钎料试验方法简介与评述[J].电子工艺技术,2004,25(2):47-54.
[2]  ALBRECHT H J,WILKE K,BRODIE D S,et al.Reliability of board level of Pb-free Solder[J].Modern Surface Packaging,2003,(4):29-36.
[3]  NIU Z W,ZHEN D L,YANG Z.Porous membrane templated synthesis of polymer pillared layer[J].Chinese Journal of Polymer Science,2003,21(3):381-384.
[4]  刘丽,张志谦,黄玉东,等.超声作用对芳纶/环氧浸润行为的影响[J].材料科学与工艺,2002,10(1):69-72.
[5]  SHEN P,FUJII H,MATSUMOTO T,et al.Wetting of (0001)α-Al2O3 single crystals by molten Al[J].Scripta Materialia,2003,48:779-784.
[6]  LI S J,ZHOU Y,DUAN H P.Wettability and interfacial reaction in SiC/Ni plus Ti system[J].Journal of materials science,2002,37(12):2575-2579.
[7]  LEE H K,FROHBERG M G,HAJRA J P.Surface tension measurement of liquid iron-nickel-sulphur ternary system using the electromagnetic oscillating droplet technique[J].ISIJ International,1993,33(8):833-838.
[8]  OGINO K,TAIMATSU H.Effect of oxygen on the surface tension of liquid nickel and the wettability of alumina by liquid nickel[J].Transaction of Japan Institute of Metal,1979,43(9):871-876.
[9]  刘兴军,陈晓虎.电子部件封装用无铅焊接材料的研究动态[J].稀有金属,2003,27(6):804-808.
[10]  JISZ31982003,鉛フリ一はんだ実験方法,第四部:ウエツテインケバンス法及び接触角法にとく濡れ性実験方法[S].
[11]  BUKAT K,SITEK J.采用非VOC焊剂的无铅焊料的可焊性评估[J].电子工艺技术,2003,24(5):230-232.
[12]  OHNUMA I,LIU X J,OHTANI H.Thermal dynamic database for phase diagrams in micro-soldering alloys[J].Journal Electronic Materials,1999,28(11):1164-1166.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133