全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2014 

层厚比对磁控溅射Cr/CrN多层涂层组织和性能的影响

DOI: 10.11868/j.issn.1001-4381.2014.11.005, PP. 28-33

Keywords: Cr/CrN多层涂层,层厚比,硬度,磨损率

Full-Text   Cite this paper   Add to My Lib

Abstract:

在超高真空磁控溅射仪上,制备了一系列具有相同调制周期不同层厚比的Cr/CrN涂层。用X射线衍射仪分析了涂层的相组成,通过扫描电镜观察了涂层形貌,采用显微硬度计测试了涂层硬度,在划痕仪上确定涂层和基体间的结合力,并利用磨损仪测量涂层的摩擦磨损性能。结果表明调制周期为400nm时,当层厚比由2.0减小到0.2,Cr/CrN多层涂层始终由Cr和CrN两相组成,涂层择优取向为CrN(200),且涂层变得愈加致密,硬度从1550HV增大到2300HV,磨损率从2.4×10-8mm3·N-1·m-1减小为0.6×10-8mm3·N-1·m-1,涂层和基体结合性能优良。

References

[1]  TAN Shu-yong, ZHANG Xu-hai, WU Xiang-jun, et al. Comparison of chromium nitride coatings deposited by DC and RF magnetron sputtering [J].Thin Solid Films, 2011, 519(7): 2116-2120.
[2]  潘应晖,许晓静. Ti6Al4V表面磁控溅射高硬SiC薄膜的摩擦磨损性能[J].材料工程,2013,(6):63-66.PAN Ying-hui, XU Xiao-jing. Friction/wear properties of magnetron sputtered high-hard SiC films on Ti6Al4V alloy[J]. Journal of Materials Engineering, 2013,(6):63-66.
[3]  谈淑咏, 张旭海, 李纪宏, 等.基底负偏压对直流磁控溅射CrN薄膜择优取向及表面形貌的影响[J].功能材料, 2010, 41(6): 1015-1018.TAN Shu-yong, ZHANG Xu-hai, LI Ji-hong, et al. Effects of substrate negative bias voltages on preferred orientation and surface morphology of CrN films deposited by DC reactive magnetron sputtering [J]. Journal of Functional Materials, 2010, 41(6): 1015-1018.
[4]  WANG L,NIE X, HOUSDEN J, et al. Material transfer phenomena and failure mechanisms of a nanostructured Cr-Al-N coating in laboratory wear tests and an industrial punch tool application [J]. Surface and Coatings Technology, 2008, 203: 816-821.
[5]  喻利花,苑彩云,许俊华. 磁控溅射NbSiN复合膜的微结构和性能[J]. 材料工程,2013,(7):35-39.YU Li-hua, YUAN Cai-yun,XU Jun-hua.Microstructures and mechanical properties of magnetron sputtered NbSiN composite films[J]. Journal of Materials Engineering, 2013,(7):35-39.
[6]  WANG Q. Influence of N2 gas pressure and negative bias voltage on the microstructure and properties of Cr-Si-N films by a hybrid coating system [J]. J Vac Sci Technol A, 2008, 26: 1188-1194.
[7]  周小军,易健宏,倪成林,等. VC/Ni 纳米叠层薄膜的制备及力学性能[J].航空材料学报,2014,34(1):39-45.ZHOU Xiao-jun,YI Jian-hong,NI Cheng-lin,et al. Preparation and mechanical properties of VC/Ni nano-laminated coatings[J]. Journal of Aeronautical Materials, 2014,34(1):39-45.
[8]  RET M D, DAUCHOT J P, HECQ M. Study of the moisture and thermal resistance of AlN/ZrN/AlN multilayers coating [J]. Surface and Coatings Technology, 2005, 200: 94-99.
[9]  CHU X, BARNETT S A. Model of superlattice yield stress and hardness enhancement [J]. Journal of Applied Physics, 1995, 77: 4403-4441.
[10]  JLANKOWSKI A F. Measurement of lattice strain in Au-Ni multilayer and correlation with biaxial modulus effect [J]. Journal of Applied Physics, 1992, 71:1782-1789.
[11]  MOHLES V. Orowan process controlled dislocation glide in materials containing incoherent particles [J]. Materials Science Engineering A, 2001, 309-310: 265-269.
[12]  KIM Y J, BYUN T J, HAN J G. Bilayer period dependence of CrN/CrAlN nanoscale multilayer thin films [J]. Superlattices and Microstructures, 2009, 45(2): 73-79.
[13]  RAHMAN M, HAIDER J, DOWLING D P, et al. Deposition of magnetron sputtered TiN+MoSx coating with Ti-TiN graded interlayer [J]. Surface and Coatings Technology, 2005, 200: 1071-1075.
[14]  HAIDER J, RAHMAN M, CORCORAN B, et al. Deposition and characterization of hard-solid lubricant coating by closed-field magnetron sputtering [J]. Surface and Coatings Technology, 2005, 200: 1080-1083.
[15]  谈淑咏, 张旭海, 吴湘君, 等.氮流量比对直流反应磁控溅射制备氮化铬涂层组织和性能的影响[J].机械工程材料, 2010, 34(7): 34-37. TAN Shu-yong, ZHANG Xu-hai, WU Xiang-jun, et al. Effect of N2 flow rate on structure and property of CrN coatings deposited by DC reactive magnetron sputtering[J]. Materials for Mechanical Engineering, 2010, 34(7): 34-37.
[16]  谈淑咏, 张旭海, 吴湘君, 等. Si基底磁控溅射制备CrN薄膜表面形貌与生长机制[J].中国有色金属学报, 2011, 21(6):1367-1372. TAN Shu-yong, ZHANG Xu-hai, WU Xiang-jun, et al. Surface morphology and growth mechanism of magnetron sputtered CrN films on silicon substrate [J]. Transactions of Nonferrous Metals Society of China, 2011, 21(6): 1367-1372.
[17]  钟彬, 徐小连, 陈义庆, 等. Cr/CrN 多层膜的结构及腐蚀性能研究[J]. 真空, 2009, 46(5):22-25. ZHONG Bin, XU Xiao-lian,CHEN Yi-qing, et al. Study on the microstructure and corrosion behavior of Cr/CrN multilayer thin films[J]. Vacuum, 2009, 46(5):22-25.
[18]  王静. 反应磁控溅射金属/TiN多层膜及金属掺杂TiN薄膜的制备与特性[D].延吉: 延边大学, 2012. WANG Jing. Preparation and characterization of reactive magnetron sputtered metal /TiN multilayer films and metal-doped TiN films[D]. Yanji: Yanbian University, 2012.
[19]  ROMERO J, ESTEVE J, LOUSA A. Period dependence of hardness and microstructure on nanometric Cr/CrN multilayers [J]. Surface and Coatings Technology, 2004, 188-189: 338-343.
[20]  蔡志海, 牛庆银, 底月兰,等. 调制周期对Cr/CrN纳米多层膜的结构与性能的影响[J]. 金属热处理, 2011, 36(1): 29-32. CAI Zhi-hai, NIU Qing-yin, DI Yue-lan, et al. Influence of modulation period on microstructure and properties of Cr /CrN nanoscale multilayer films[J]. Heat Treatment of Metals, 2011, 36(1): 29-32.
[21]  王全宏. Ti/TiN/Zr/ZrN多层膜及Al薄膜对钢基体疲劳性能的影响[D].长沙:中南大学, 2012. WANG Quan-hong. Effect of Ti/TiN/Zr/ZrN multilayer films and Al films on the fatigue properties of steel substrate. Changsha: Central South University, 2012.
[22]  BERGER M, ERIKSSON M, ENGQVIST H, et al. The multilayer effect in abrasion-optimising the combination of hard and tough phases [J]. Surface and Coatings Technology, 1999, 116-119: 1138-1144.
[23]  宋贵宏, 娄茁, 熊光连, 等. 铜合金表面Ti /TiN 多层膜的制备、结构及其性能[J]. 沈阳工业大学学报, 2012, 34(4): 391-396. SONG Gui-hong, LOU Zhuo, XIONG Guang-lian, et al. Preparation, structure and performance of Ti /TiN multilayer film on surface of copper alloy[J]. Journal of Shenyang University of Technology, 2012, 34(4): 391-396.
[24]  杜军, 付永辉, 田林海,等. 碳膜与CrN/Cu膜的摩擦学性能对比[J]. 有色金属, 2004, 52: 20-21. DU Jun, FU Yong-hui, TIAN Lin-hai, et al.Properties of carbon film and CrN-Cu film[J]. Nonferrous Metals, 2004, 52: 20-21.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133