LEATHAM A. Commercial spray forming: exploiting the metallurgical benefits[J]. Materials World, 1996, 4 (6):317-320
[3]
CHIANG C H, TSAO C Y A. Si coarsening of spray-formed high loading hypereutectic Al-Si alloys in the semisolid state[J]. Mater Sci Eng: A,2005, 396(1-2): 263-270.
[4]
王磊,张永安,刘红伟,等.喷射成形70Si30Al合金封装材料的组织性能研究[J].稀有金属,2007,31(1):1-4.WANG L,ZHANG Y A,LIU H W, et al. Microstructures and properties of spray-formed 70Si30Al alloy packaging material[J].Chinese Journal of Rare Metals, 2007,31(1):1-4.
[5]
JACOBSON D M. Spray-formed silicon-aluminum[J].Advanced Materials and Processes,2000,157(3):36-39.
[6]
张伟,杨伏良,甘卫平,等.电子封装用高硅铝合金热膨胀性能的研究[J].材料导报,2006,20(增刊1): 348-350.ZHANG W, YANG F L, GAN W P, et al. Study on thermal expansion property of high-silicon aluminum alloy for electronic packaging[J]. Materials Review, 2006,20(Suppl 1): 348-350.
[7]
吴安如,黎小辉. 制备工艺对高硅铝合金的组织及性能的影响[J].热加工工艺,2006,35(14):16-19.WU A R, LI X H. Study of fabricating process on microstructures and mechanical property of high-silicon aluminum alloy[J].Material & Heat Treatment, 2006,35(14):16-19.
[8]
武高辉,修子扬,张强,等. 一种环保型电子封装用复合材料[J].红外与激光工程,2006,35(增刊):161-164.WU G H, XIU Z Y,ZHANG Q,et al. An environment protection composite for electronic package[J]. Infrared and Laser Engineering,2006,35(Suppl):161-164.
[9]
李志辉,张永安,熊柏青,等. 喷射成形硅铝电子封装材料的电镀及钎焊性能[J]. 稀有金属,2010,34(5):633-637.LI Z H, ZHANG Y A,XIONG B Q, et al. Plating and brazing performance of spray-formed Si-Al materials for electronic packaging[J]. Chinese Journal of Rare Metals, 2010,34(5):633-637.
[10]
徐才录,TENSI H M, ROESCH R. 凝固条件和镁对Al-Si11.0合金组织的影响[J].材料工程,1999,(1):3-6. XU C L,TENSI H M,ROESCH R. Effect of the cooling conditions and Mg content on the microstructures of Al-Si11.0 alloy[J]. Journal of Materials Engineering,1999, (1):3-6.
[11]
张家敏,易健宏,甘国友,等.烧结TiH2粉末制备钛合金的工艺及组织[J].材料工程,2013,(10):64-70. ZHANG J M, YI J H, GAN G Y, et al. Process and microstructure of titanium alloy prepared by sintering TiH2 powder[J]. Journal of Materials Engineering, 2013, (10):64-70.
[12]
赵彦玲,周凯,车万博,等. 铝硅合金轧制中增强体颗粒应力集中数值模拟[J].材料工程,2013,(3):51-54. ZHAO Y L, ZHOU K, CHE W B, et al. Numerical simulation of reinforced particle stress concentration in Al-Si alloy rolling[J]. Journal of Materials Engineering, 2013, (3):51-54.
[13]
WANG S M,HE D W,ZOU Y T,et al.High-pressure and high-temperature sintering of nanostructureed bulk NiAl materials[J]. Journal of Material Research,2009,24(6):2092-2095.
