|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
多晶柱状Cu膜的表面粗化与织构
, PP. 1233-1237
Keywords: Cu膜,表面粗化,织构,动力学标度
Abstract:
用磁控溅射工艺分别在Si和Al2O3衬底上沉积两种不同织构组分的多晶柱状Cu膜,基于动力学标度方法表征两种薄膜的表面粗化特征.结果表明,Cu(111)取向晶粒组分多的薄膜的生长指数较大、表面粗化速率较快.对于较低温度下沉积的多晶柱状薄膜,基于其晶粒几何形态和弱化的晶界限制的特点,提出了一种表面粗化机制,认为薄膜的表面粗化主要依赖于其晶粒表面的粗化过程,而薄膜织构决定了薄膜表面粗化速率.
| [1] | Dumay B, Finot E, Theobald M, Legaie O, Durand J, Baclet P, Goudonnet J P. J Appl Phys, 2002; 92: 6572
|
| [2] | Family F, Vicsek T. J Phys, 1985; 18A: L75
|
| [3] | Chame A, Reis F D A A. Surf Sci, 2004; 553: 145
|
| [4] | Kardar M, Parisi G, Zhang Y C. Phys Rev Lett, 1986; 56: 889
|
| [5] | Lai Z W, Sarma S D. Phys Rev Lett, 1991; 66: 2348
|
| [6] | Karabacak T, Zhao Y P, Wang G C, Lu T M. Phys Rev, 2001; 64B: 085323
|
| [7] | Dalakos G T, Plawsky J P, Persans P D. Phys Rev, 2005; 72B: 205305
|
| [8] | Tong W M, Williams R S, Yanase A, Segawa Y, Anderson M S. Phys Rev Lett, 1994; 72: 3374
|
| [9] | Knepper R, Messier R. Proc SPIE, 2001; 4467: 87
|
| [10] | Xia L F. Duffuaion in Metals. Harbin: Publishing House of Harbin Institute of Technology, 1989: 137 (夏立芳．金属中的扩散．哈尔滨:哈尔滨工业大学出版社,1989: 137)
|
| [11] | Mullins W W. J Appl Phys, 1957; 28: 333
|
| [12] | Herring C. Phys Rev, 1951; 82: 87
|
| [13] | Okolo B, Lamparter P, Welzel U, Wagner T, Mittemeijer E J. Thin Solid Films, 2005; 474: 50
|
| [14] | Tang W, Xu K W, Wang P, Li X. Acta Metall Sin, 2002; 38: 9 (唐武,徐可为,王平,李弦．金属学报,2002;38:9)
|
| [15] | Freund L B, Suresh S. Thin Film Materials Stress, Defect Formation and Surface Evolution. Cambridge: Cambridge University Press, 2003: 550
|
| [16] | Lita A E, Sanchez J E. Phys Rev, 2000; 61 B: 7692
|
| [17] | Siegert M. Phys Rev Lett, 1998; 81: 548
|
| [18] | Lukaszew R A, Clarke R. Appl Surf Sci, 2002; 191: 118A
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
