朱耀.AA7055铝合金在不同温度下及应变率下力学性能的实验研究［D］.哈尔滨:哈尔滨工业大学，2010.(Zhu Yao.Experimental research on mechanical properties of AA7055 aluminum alloys at different temperatures and strain rates［D］.Harbin:Harbin Institute of Technology，2010.)
[2]
Depince P，Hascoet J Y.Active integration of tool deflections in end milling.part 1:prediction of milled surfaces ［J］.International Journal Machine Tools & Manufacture，2006，46(9):937-944.
[3]
Ratchev S，Liu S，Huang W，et al.Milling error prediction and compensation in machining of low rigidity parts［J］.International Journal of Machine Tools & Manufacture，2004，44(15):1629-1641.
[4]
O’Connor P D T，Kleyner A.Practical reliability engineering ［M］.5th ed.Chichester:Weily，2012.
[5]
Zhang Y M.Connotation and development of mechanical reliability-based design［J］.Journal of Mechanical Engineering，2010，46(14):167-188.
[6]
Budak E，AltintasY，Armarego E J A.Prediction of milling force coefficient from orthogonal cutting data［J］.Journal of Manufacturing Science and Engineering，1996，118(2):216-224.
[7]
Kops L，Vo D T.Determination of the equivalent diameter of an end mill based on its compliance ［J］.Annals of the CIRP，1990，39(1):93-96.
[8]
Law K M Y，Geddam A，Ostaflev V A.A process-design approach to error compensation in the end milling pockets［J］. Journal of Materials Processing Technology ，1999，89/90:238-244.
[9]
Seo T L.Integration of tool deflection during the generation of tool path ［D］.Nantes:University of Nantes-Ecole CentraleofNantes，1998.
[10]
宋戈.基于切削力精确建模的钛合金薄壁件让刀变形预测研究［D］.济南:山东大学，2012.(Song Ge.Research on surface error prediction in milling process of thin wall part based on accurate cutting force modeling［D］.Jinan:Shandong University，2012.)
[11]
胡自化.薄壁件数控侧铣若干基础理论、实验及集成技术问题的研究［D］.湘潭:湘潭大学，2008.(Hu Zi-hua.Study on some problems of basic theory，experiments and integrated technology of thin-walled components in numerical control peripheral milling［D］.Xiangtan:Xiangtan University，2008.)
[12]
Yang M Y，Park H D.The prediction of cutting forces in ball-end milling［J］.International Journal of Machine Tools and Manufacture，1991，31(1):45-54.
