全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

无刷直流电动机低转矩脉动超前换相控制方法

, PP. 112-117

Keywords: 无刷直流电动机,超前换相,低转矩脉动,六拍控制

Full-Text   Cite this paper   Add to My Lib

Abstract:

该文给出一种优化的无刷直流电动机变母线电压六拍控制方法。既解决了传统六拍控制策略中由于绕组电感所造成的电流滞后问题,又改善了由于换相所造成的电流脉动问题。该方法是通过在每两拍之间插入一小段缓冲区来实现的,该缓冲区使下一拍将要切入的电流提前切入,同时使当前拍将要切出的电流延迟切出。通过确定缓冲区的起始位置,即超前换相角的大小,保证每一拍所对应的相电流的中心和反电动势的中心重合。通过选取缓冲区开关器件PWM调制的占空比,降低电机运行过程中的换相转矩脉动。该文方法只需根据负载大小选取超前换相角,一旦选定适用于所有转速。文中给出了该方法的理论推导过程和实验验证波形,从实验结果可以发现,电流滞后被消除,换相电流脉动显著减小,电机的利用率得到提高。

References

[1]  Jahns T M,Soong W L. Pulsating torque minimization techniques for permanent magnet ac motor drives-a review[J]. IEEE Transactions on Industrial Electronics, 1996,43(2):321-330.
[2]  Carlson R,Lajoie-Mazenc M,Fagundes J C S. Analysis of torque ripple due to phase commutation in brushless DC machines[J]. IEEE Transactions on Industry Applications, 1992,28(3):632-638.
[3]  Takahashi I,Koganezawa T,Su Guijia,et al. A super high speed PM motor drive system by a quasi-current source inverter[J]. IEEE Transactions on Industry Applications, 1994,30(3):683-690.
[4]  Kim Kyeong-Hwa,Youn Myung-Joong. DSP-based high-speed sensorless control for a brushless DC motor using a DC Link Voltage Control[J]. Electric Power Components and Systems, 2002,30(9):889-906.
[5]  张晓峰,吕征宇. 基于级联式拓扑的消除无刷直流电机传导区转矩脉动方法[J]. 电工技术学报, 2007,22(1):29-33. Zhang Xiaofeng,Lü Zhengyu.A novel method to eliminate the conduction torque ripple in BLDCM using cascade topology structure[J].Transactions of China ElectroTechnical Society,2007,22(1)
[6]  Shi Tingna,Guo Yuntao,Song Peng,et al. A new approach of minimizing commutation torque ripple for brushless dc motor based on DC-DC converter[J] IEEE Transactions on Industrial Electronics,2011,57(10):3483-3490.
[7]  Spée R,Wallace A K. Performance characteristics of brushless DC drives[J] IEEE Transactions on Industry Applications,1988,24(4):568-573.
[8]  Safi S K,Acarnley P P,Jack A G. Analysis and simulation of the high-speed torque performance of brushless DC motor drives[J]. IEE Proceedings-Electric Power Application, 1995,142(3):191-200.
[9]  戴卫力,王慧贞,严仰光. 电励磁双凸极电机的提前角度控制[J]. 中国电机工程学报, 2007,27(27):88-93. Dai Weili,Wang Huizhen,Yan Yanghuang.Advanced angle control mode for electro-magnetic doubly salient machine[J].Proceedings of the CSEE,2007,27(27)
[10]  Chiu C L,Chen Y T,Shen Y H,et al. A accurate automatic phase advance adjustment of brushless DC motor[J]. IEEE Transactions on Magnetics, 2009,45(1):120-126.
[11]  罗宏浩,吴峻,赵宏涛,等. 永磁无刷直流电机换相控制研究[J]. 中国电机工程学报, 2008,28(24):108-112. Luo Honghao,Wu Jun,Zhao Hongtao,et al.Commutation control of permanent Brushless DC Motors [J].Proceedings of the CSEE,2008,28(24)
[12]  赵宏涛,吴峻. 定子磁链提前换相增加直线永磁无刷直流电机的推力[J]. 中国电机工程学报, 2011,31(3):118-123. Zhao Hongtao,Wu Jun.Thrust enhancement of linear permanent magnet Brushless DC Motor by advance commutating using stator flux linkage[J].Proceedings of the CSEE,2011,31(3)
[13]  邹继斌,李建军,徐永向,等. 驱动方式对永磁无刷直流电机损耗的影响[J]. 电工技术学报, 2011,26(9):43-47. Zou Jibin,Li Jianjun,Xu Yongxiang,et al.Influences of drive strategies on the loss of permanent magnet brushless direct current motor[J].Transactions of China ElectroTechnical Society,2011,26(9)
[14]  Song J H,Choy I. Commutation torque ripple reduction in Brushless DC Motor drives using a single DC current sensor[J]. IEEE Transactions on Power Electronics, 2004,19(2):312-319.
[15]  Kim D K,Lee K W,Kwon B I. Commutation torque ripple reduction in a position sensorless brushless DC motor drive[J]. IEEE Transactions on Power Electronics, 2006,21(6):1762-1768.
[16]  Liu Y,Zhu Z Q,Howe D. Commutation-torque-ripple minimization in direct-torque-controlled PM brushless dc drives[J]. IEEE Transactions on Industry Applications, 2007,43(4):1012-1021.
[17]  Boukais B,Zeroug H. Magnet segmentation for commutation torque ripple reduction in a brushless DC motor drive[J]. IEEE Transactions on Magnetics, 2010 46(11):3909-3919.
[18]  Lin Y K,Lai Y S. Pulse-Width Modulation technique for BLDCM drives to reduce commutation torque ripple without calculation of commutation time[J]. IEEE Transactions on Industry Applications, 2011,47(4):1786-1793.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133