Trabandt U T, Knabe H, Rebstock K, et al. Test results of low cost C/SiC for martian entry and reusable launcher [J]. Space Technology, 1997, 17(5): 281-291.
[2]
Alting J, Grauer F, Hagemann G, et al. Hot-firing of an advanced 40 kN thrust chamber, AIAA/ASME/SAE/ASEE-2001-3260[R]. Reston: AIAA, 2001.
[3]
Khan M B. An investigation of the ablation behavior of advanced ultrahigh-temperature EPDM/epoxy insulation composites [J]. Polymerica Technology Plasticity Engineering, 1997, 35: 187-206.
[4]
Li H, Zhang L T, Zeng Q F, et al. Reliability analysis of 2D C/SiC composite [J]. Acta Materiae Compositae Sinica, 2007, 4(24): 95-100.
[5]
Yang C P, Jiao G Q, Wang B, et al. Oxidation damages and a stiffness model for 2D-C/SiC composites [J]. Acta Materiae Compositae Sinica, 2009, 26(3): 175-181.
[6]
Khakani M A EI, Chaker M, Jean A, et al. Hardness and Young's modulus of amorphous α-SiC thin films determined by nanoindentation and bulge tests [J]. Journal of Materials Research, 1994, 9: 96-103.
[7]
Brusberg L, Queisser M, Gentsch C, et al. Advances in CO2-laser drilling of glass substrates [J]. Physics Procedia, 2012, 39: 548-555.
[8]
Boutinguiza M, Pou J, Lusqui？os F, et al. Drilling of slate tiles by CO2 laser [J]. Journal of Materials Processing Technology, 2005, 159: 83-90.
[9]
Qi H, Chen T, Yao L Y, et al. Micromachining of microchannel on the polycarbonate substrate with CO2 laser direct-writing ablation [J]. Optics and Lasers in Engineering, 2009, 47: 594-598.
[10]
Nath A K, Reghu T, Paul C P, et al. High-power transverse flow CW CO2 laser for material processing applications [J]. Optics & Laser Technology, 2005, 37: 329-335.
[11]
Schmidt S, Beyer S, Knabe H, et al. Advanced ceramic matrix composite materials for current and future propulsion technology applications [J]. Acta Astron, 2004, 55: 409-420.
[12]
Chen Z F, Fang D, Miao Y L, et al. Comparison of morphology and microstructure of ablation centre of C/SiC composites by oxy-acetylene torch at 2900 and 3550 ℃ [J]. Corrosion Science, 2008, 50: 3378-3381.
[13]
Glass D. Ceramic matrix composite (CMC) thermal protection systems (TPS) and hot structures for hypersonic vehicles, AIAA-2008-2682[R]. Reston: AIAA, 2008.
[14]
Muhlratzer A, Pfeiffer H. All-ceramic body flaps for re-entry spacecraft [J]. SAMPE Journal, 2002, 38(4): 22-29.
[15]
Meng Z X, Cheng L F, Zhang L T, et al. Micro-structures, strength and toughness of 2D Cf/SiC composites by chemical vapor infiltration [J]. International Journal of Inorganic Materials, 2009, 24: 939-942.
[16]
Holman J P. Heat transfer[M]. 9th ed. New York: McGraw-Hill, 1999: 152-158.
[17]
Alfano D, Scatteia L, Cantoni M, et al. Emissivity and catalycity measurements on SiC-coated carbon fibre reinforced silicon carbide composite [J]. Journal of the European Ceramic Society, 2009, 29: 2045-2051.
[18]
Ghollon G, Pailler R, Naslain R. Correlation between microstructure and mechanical behavior at high temperature of a SiC fiber with a low oxygen content (Hi-Nicalon) [J]. Journal of Materials Science Letters, 1997, 32: 1133-1147.
[19]
Chen B, Zhang L T, Cheng L F, et al. Ablation behavior of a three-dimensional carbon/silicon carbide composite nozzle in an ethanol/oxygen combustion gas generator [J]. International Journal of Applied Ceramic Technology, 2009, 6(2): 182-189.
[20]
Jacobson N S, Lee K N, Fox D S. Reaction of silicon carbide and silicon oxide at elevated temperatures [J]. Journal of the American Ceramic Society, 1992, 75: 1603-1611.
[21]
Shimoo T, Okamura K, Morisada Y. Active-to-passive oxidation transition for polycarbosilane-derived silicon carbide fibers heated in Ar-O2 gas mixtures [J]. Journal of Materials Science Letters, 2002, 37: 1793-1800.
[22]
Aylward G, Findlay T. SI chemical data[M]. 6th ed. New York: John Wiley & Sons Ltd, 2007: 125-131.
[23]
Zhang Y N, Zhang L T. Friction of a C/SiC composite bearing in air and in combustion environments [J]. International Journal of Applied Ceramic Technology, 2009, 6(2): 171-181.
[24]
González D, Montes-Morán M A, Young R J, et al. Effect of temperature on the graphitization process of a semianthracite [J]. Fuel Processing Technology, 2002, 79(3): 245-250.
[25]
He H Q, Zhou X. Ablative control mechanism in solid rocket nozzle [J]. Journal of Propulsion Technology, 1993, 14(4): 36-41.
[26]
Trinquecoste M, Carlier J L, Derrb A, et al. High temperature thermal and mechanical properties of high tensile carbon single filaments [J]. Carbon, 1996, 34(7): 923-929.
[27]
Zhang Q, Cheng L F, Zhang L T, et al. Thermal expansion behavior of carbon fiber reinforced chemical-vapor-infiltrated silicon carbide composites from room temperature to 1400 ℃ [J]. Materials Letter, 2006, 60(27): 3245-3247.
[28]
Villeneuve J F, Naslain R, Fourmeaux R, et al. Longitudinal/radial thermal expansion and poisson ratio of some ceramic fibers as measured by transmission electron microscopy [J]. Composites Science and Technology, 1993, 49: 89-103.
[29]
Lu G F, Qiao S R, Zhang C G. Oxidation protection of C/Si-C-N composites by a mullite interphase [J]. Composites: Part A, 2008, 39: 1467-1470.
[30]
Her T H. Femtosecond-laser-induced periodic self-organized nanostructures [J]. Comprehensive Nanoscience and Technology, 2011, 4: 277-314.
[31]
Sigman A E, Fauchet P M. Stimulated wood’s anomalies on laser-illuminated surface [J]. IEEE Journal of Quantum Electron, 1986: 22(8): 1384-1403.
[32]
Young J F, Sipe J E, Preston J S, et al. Laser induced periodic surface damage and radiation remnents [J]. Applied Physics Letters, 1982, 41: 261-264.
[33]
Brook R J. Controlled grain growth [J]. Treatise Materials Science and Technology, 1976, 9: 331-364.
[34]
Pi H L, Fan S W, Wang Y G. C/SiC-ZrB2-ZrC composites fabricated by reactive melt infiltration with ZrSi2 alloy [J]. Ceramics International, 2012, 38: 6541-6548.
[35]
Zuo F J, Cheng L F, Xiang L Y, et al. Ablative property of laminated ZrB2-SiC ceramics under oxyacetylene torch [J]. Ceramics International, 2013, 39(4): 4627-4631.
