Bertolini J, Castanié B, Barrau J J, et al. Multi-level experimental and numerical analysis of composite stiffener debonding. Part 2: Element and panel level [J]. Composite Structures, 2009, 90(4): 392-403.
[2]
孔 斌, 叶 强, 陈普会, 等. 复合材料整体加筋板轴压后屈曲的传载机制 [J]. 复合材料学报, 2010, 27(5):142-149. Kong Bin, Ye Qiang, Chen Puhui, et al. Post-buckling load transfer mechanisms of an integrated composite panel under uniaxial compression [J]. Acta Materiae Compositae Sinica, 2010, 27(5): 142-149.
[3]
孔 斌, 叶 强, 陈普会, 等. 复合材料整体加筋板轴压后屈曲失效表征 [J]. 复合材料学报, 2010, 27(5): 150-155. Kong Bin, Ye Qiang, Chen Puhui, et al. Post-buckling failure characterization of an integrated stiffened composite panel under uniaxial compression [J]. Acta Materiae Compositae Sinica, 2010, 27(5): 150-155.
[4]
孙启星. 复合材料整体加筋壁板的失效分析 [D]. 南京: 南京航空航天大学, 2008. Sun Qixing. Failure analysis of an integrated composite panel [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2008.
[5]
朱菊芬, 杨海平, 汪 海, 等. 复合材料加筋板壳结构的后屈曲强度及破坏分析程序系统 [J]. 计算结构力学及其应用, 1996, 13(4): 489-493. Zhu Jufen, Yang Haiping, Wang Hai, et al. A programming system of postbuckling strength and failure analysis for composite stiffened plates and shells [J]. Computational Structural Mechanics and Applications, 1996, 13(4): 489-493.
[6]
陈桂娟, 矫桂琼, 熊 伟, 等. 复合材料层合板非线性后屈曲特性的研究 [J].武汉科技大学学报: 自然科学版, 2005, 28(1): 103-107. Chen Guijuan, Jiao Guiqiong, Xiong Wei, et al. Nonlinear postbuckling behavior of composite laminated plates [J]. Journal of Wuhan University of Science and Technology: Natural Science Edition, 2005, 28(1): 103-107.
[7]
Zimmermann R, Rolfes R. POSICOSS-improved postbuckling simulation for design of fibre composite stiffened fuselage structures [J]. Composite Structures, 2006, 73(2): 171-174.
[8]
Degenhardt R, Rolfes R, Zimmermann R, et al. COCOMAT-improved material exploitation at safe design of composite airframe structures by accurate simulation of postbuckling and collapse [J]. Composite Structures, 2006, 73(2): 175-178.
[9]
Kling A, Degenhardt R, Klein H, et al. Novel stability design scenario for aircraft structures-simulation and experimental validation [C]//Proceedings of the 5th International Conference on Computation of Shell and Spatial Structures, 2005.
[10]
Zimmermann R, Klein H, Kling A. Buckling and postbuckling of stringer stiffened fibre composite curved panels—tests and computations [J]. Composite Structures, 2006, 73(2): 150-161.
[11]
Degenhardt R, Kling A, Rohwer K, et al. Design and analysis of stiffened composite panels including post-buckling and collapse [J]. Computers & Structures, 2008, 86(9): 919-929.
[12]
Koundouros M. In-plane compressive behaviour of stiffened thin-skinned composite panels with a stress concentrator [D]. London: Imperial College London, 2005.
[13]
Orifici A C, Shah S A, Herszberg I, et al. Failure analysis in postbuckled composite T-sections [J]. Composite Structures, 2008, 86(1-3): 146-153.
[14]
Orifici A C, Thomson R S, Herszberg I, et al. An analysis methodology for failure in postbucklng skin-stiffener interfaces [J]. Composite Structures, 2008, 86(1-3): 186-193.
[15]
Orifici A C, de Zarate Alberdi I O, Thomson R S, et al. Compression and post-buckling damage growth and collapse analysis of flat composite stiffened panels [J]. Composites Science and Technology, 2008, 68(15-16): 3150-3160.
[16]
Orifici A C. Degradation models for the collapse analysis of composite aerospace structures [D]. Melbourne: RMIT University, 2007.
[17]
Bertolini J, Castanié B, Barrau J J, et al. An experimental and numerical study on omega stringer debonding [J]. Composite Structures, 2008, 86(1-3): 233-242.
[18]
Bertolini J, Castanié B, Barrau J J, et al. Multi-level experimental and numerical analysis of composite stiffener debonding. Part 1: Non-specific specimen level [J]. Composite Structures, 2009, 90(4): 381-391.
