Long-term storage of raw cotton in stacks is accompanied by spatially non-uniform thermal and humidity fields, and a locally hazardous state can develop unnoticed when the stack is observed at a single point or at long manual inspection intervals. This paper proposes a closed-loop mechatronic architecture that unites eight distributed temperature-humidity sensing nodes with wireless data transmission, validity-aware sensor fusion, a multi-factor technological risk index, recursive least-squares (RLS) identification of the effective cooling coefficient with exponential forgetting (used for model adaptation and diagnosis of ventilation effectiveness), a six-state supervisory automaton and a mobile stepper-driven ventilation actuator protected by independent hardware safety circuits. In contrast to monitoring-only solutions, measurement validation, online identification, risk-based decision-making, positioning and active ventilation are coordinated within a single control loop, and the information uncertainty caused by lost sensor nodes is treated separately from the technological risk. The architecture was implemented in MATLAB/Simulink with eight first-order thermal channels, sensor faults and communication delays, fan/induction-motor and stepper-drive subsystems, and was examined in five scenarios: nominal operation, multiple hot zones, sensor disconnection, a 30% loss of fan effectiveness and a 40% increase in movement resistance. Against the virtual validation series the identified model gave RMSE = 0.1197?C, MAE = 0.0965?C, MAPE = 0.343% and R2 = 0.9689. These values characterise agreement with simulated data only and are not claimed as physical validation on a real cotton stack. The study thus provides a structured path from distributed monitoring to adaptive mechatronic control, together with a staged experimental protocol and quantitative acceptance criteria for subsequent validation.
References
[1]
Ma, J. (2014) Analysis on the Fire Risk Existing in the Storage of Textile Materials and Textile Goods. Procedia Engineering, 71, 271-275. https://doi.org/10.1016/j.proeng.2014.04.039
[2]
He, M., Ding, L., Yu, L. and Ji, J. (2021) Effect of Density on the Smoldering Characteristics of Cotton Bales Ignited Internally. Proceedings of the Combustion Institute, 38, 5043-5051. https://doi.org/10.1016/j.proci.2020.06.219
[3]
Zhang, W., Zhao, B., Yang, Q., Zhou, L., Jiang, H., Niu, K., et al. (2022) Design and Test of Intelligent Inspection and Monitoring System for Cotton Bale Storage Based on RFID. Scientific Reports, 12, Article No. 4491. https://doi.org/10.1038/s41598-022-08229-6
[4]
Qiu, L., Liang, X. and Huang, Z. (2017) PATL: A RFID Tag Localization Based on Phased Array Antenna. Scientific Reports, 7, Article NO. 44183. https://doi.org/10.1038/srep44183
[5]
Ljung, L. (1999) System Identification: Theory for the User. 2nd Edition, Prentice Hall.
[6]
?str?m, K.J. and Wittenmark, B. (1995) Adaptive Control. 2nd Edition, Addison-Wesley.
[7]
Prandini, M. and Campi, M.C. (1998) A New Recursive Identification Algorithm for Singularity Free Adaptive Control. Systems & Control Letters, 34, 177-183. https://doi.org/10.1016/s0167-6911(98)00012-7
[8]
Levent, M.L. and Aydogdu, O. (2022) Adaptive State Feedback Control Method Based on Recursive Least Squares. Elektronika ir Elektrotechnika, 28, 27-34. https://doi.org/10.5755/j02.eie.31149
[9]
Zhang, P. and Xiong, G. (2026) Temperature Control of Thermal Performance Testing Systems Based on an Adaptive PI-RLS-MPC Strategy. Applied Sciences, 16, Article 2926. https://doi.org/10.3390/app16062926
[10]
Luo, D.Y. and Wang, W. (2025) A New Evolving Technology for Gearbox Condition Monitoring and Fault Diagnosis. Intelligent Control and Automation, 16, 158-174. https://doi.org/10.4236/ica.2025.164007
[11]
Toky, T.D., Zhang, M. and Wang, W. (2025) An Adaptive NF Technology for Bearing Condition Monitoring and Fault Diagnosis. Intelligent Control and Automation, 16, 61-79. https://doi.org/10.4236/ica.2025.163004
[12]
Sensirion, A.G. (2011) Datasheet SHT21: Humidity and Temperature Sensor IC. Version 3. https://labs.dese.iisc.ac.in/embeddedlab/wp-content/uploads/sites/24/2023/08/SHT21_Temp_Humidity.pdf