Comprehensive Study of the Effect of Hematite-Rich Sludge from Water Treatment Station on the Physical Properties of Metakaolin-Based Geopolymer Cements
This work aimed to study the effect of WTHs (Water treatment hematite-rich sludge) additives on the properties of geopolymers cement. Three formulations of geopolymer cement based on metakaolin powder substituted with 0, 5 and 10 wt.% of WTHs were investigated and the obtained pastes were characterized after curing times varying from 7 to 28 days. X-ray diffraction (XRD) and FT-IR patterns of metakaolin and WTHs dry powders indicate that they were in the amorphous states with illite, lepidocrocite and quartz in low concentrations in metakaolin and mainly hematite in the sludge. The pastes demonstrated an accelerating effect of the WTHs. The specimens showed weak linear shrinkage that increased slightly with sludge additive (from 0.5% to 1.7%). Improved apparent density was obtained with increasing WTHs contents (1.83 to 1.97 g/cm3). The Porosity was improved for 5% WTHs (67% to 77%) with a slight drop for 10%. The optical microstructure exhibits pores interconnectivity with appearance of some macropores favoured by WTHs additives that promoted a three-dimensional porous structure. The products exhibited a compressive strength of 14 MPa on day 28 and could be used as structural and porous materials required for thermal and acoustic isolation.
References
[1]
Lu, W., Tam, V.W.Y., Chen, H. and Du, L. (2020) A Holistic Review of Research on Carbon Emissions of Green Building Construction Industry. Engineering, ConstructionandArchitecturalManagement, 27, 1065-1092. https://doi.org/10.1108/ecam-06-2019-0283
[2]
Davidovits, J. (1989) Geopolymers and Geopolymeric Materials. JournalofThermalAnalysis, 35, 429-441. https://doi.org/10.1007/bf01904446
[3]
Ferone, C., Capasso, I., Bonati, A., Roviello, G., Montagnaro, F., Santoro, L., et al. (2019) Sustainable Management of Water Potabilization Sludge by Means of Geopolymers Production. JournalofCleanerProduction, 229, 1-9. https://doi.org/10.1016/j.jclepro.2019.04.299
[4]
Elimbi, A., Tchakoute, H.K. and Njopwouo, D. (2011) Effects of Calcination Temperature of Kaolinite Clays on the Properties of Geopolymer Cements. ConstructionandBuildingMaterials, 25, 2805-2812. https://doi.org/10.1016/j.conbuildmat.2010.12.055
[5]
Risdanareni, P., Hilmi, A. and Susanto, P.B. (2017). The Effect of Foaming Agent Doses on Lightweight Geopolymer Concrete Metakaolin Based. AIPConferenceProceedings, 1835, Article ID: 020057. https://doi.org/10.1063/1.4983797
[6]
Djobo, J.N.Y., Elimbi, A., Tchakouté, H.K. and Kumar, S. (2016) Volcanic Ash-Based Geopolymer Cements/Concretes: The Current State of the Art and Perspectives. EnvironmentalScienceandPollutionResearch, 24, 4433-4446. https://doi.org/10.1007/s11356-016-8230-8
[7]
Ngnintedem, D., Lampe, M., Tchakouté, H. and Rüscher, C. (2022) Effects of Iron Minerals on the Compressive Strengths and Microstructural Properties of Metakaolin-Based Geopolymer Materials. Gels, 8, Article No. 525. https://doi.org/10.3390/gels8080525
[8]
Elgarahy, A.M., Maged, A., Eloffy, M.G., Zahran, M., Kharbish, S., Elwakeel, K.Z., et al. (2023) Geopolymers as Sustainable Eco-Friendly Materials: Classification, Synthesis Routes, and Applications in Wastewater Treatment. SeparationandPurificationTechnology, 324, Article ID: 124631. https://doi.org/10.1016/j.seppur.2023.124631
[9]
Bai, B., Bai, F., Nie, Q. and Jia, X. (2023) A High-Strength Red Mud-Fly Ash Geopolymer and the Implications of Curing Temperature. PowderTechnology, 416, Article ID: 118242. https://doi.org/10.1016/j.powtec.2023.118242
[10]
Nadia, N.F.J., Gharzouni, A., Nait-Ali, B., Ouamara, L., Ndassa, I.M., Bebga, G., et al. (2023) Comparative Study of Laterite and Metakaolin/Hematite-Based Geopolymers: Effect of Iron Source and Alkalization. AppliedClayScience, 233, Article ID: 106824. https://doi.org/10.1016/j.clay.2023.106824
[11]
Omar Sore, S., Messan, A., Prud’homme, E., Escadeillas, G. and Tsobnang, F. (2018) Stabilization of Compressed Earth Blocks (CEBs) by Geopolymer Binder Based on Local Materials from Burkina Faso. ConstructionandBuildingMaterials, 165, 333-345. https://doi.org/10.1016/j.conbuildmat.2018.01.051
[12]
Santos, G.Z.B., Melo Filho, J.A., Pinheiro, M. and Manzato, L. (2019) Synthesis of Water Treatment Sludge Ash-Based Geopolymers in an Amazonian Context. JournalofEnvironmentalManagement, 249, Article ID: 109328. https://doi.org/10.1016/j.jenvman.2019.109328
[13]
Khaled, Z., Mohsen, A., Soltan, A. and Kohail, M. (2023) Optimization of Kaolin into Metakaolin: Calcination Conditions, Mix Design and Curing Temperature to Develop Alkali Activated Binder. Ain Shams Engineering Journal, 14, Article ID: 102142. https://doi.org/10.1016/j.asej.2023.102142
[14]
Galobardes, I., Salvador, R.P., Cavalaro, S.H.P., Figueiredo, A. and Goodier, C.I. (2016) Adaptation of the Standard EN 196-1 for Mortar with Accelerator. ConstructionandBuildingMaterials, 127, 125-136. https://doi.org/10.1016/j.conbuildmat.2016.09.147
[15]
Standard, E. (2009) Methods of Testing Cement-Part 1: Determination of Strength. Turkish Standards Institute.
[16]
ISO P (2003) 9597, “Méthode d’essai des ciments-Détermination du temps de prise et de la stabilité”. P15-473PR et NF EN 193-3, Ciment et Chaux, Afnor Ed.
[17]
EN N (2016) 196-1. Méthodes D’essais des Ciments-Partie 1: Détermination des Résistances. AFNOR.
[18]
Tebbal, N., Maza, M., Zitouni, S. and Rahmouni, Z.E.A. (2022) Combined Impact of Replacing Dune Sand with Glass Sand and Metal Fibers on Mortar Properties. Revuedescompositesetdesmatériauxavancés, 32, 85-90. https://doi.org/10.18280/rcma.320205
[19]
Dahhou, M., El Moussaouiti, M., Khachani, N., Assafi, M., Ait Hsain, L., Mostahsine, S., et al. (2012) Caractérisation physico-chimique de boues d’unité de production d’eau potable. MATECWebofConferences, 2, Article No. 01017. https://doi.org/10.1051/matecconf/20120201017
[20]
da Silva Godinho, D.d.S., Pelisser, F. and Bernardin, A.M. (2022) High Temperature Performance of Geopolymers as a Function of the Si/Al Ratio and Alkaline Media. MaterialsLetters, 311, Article ID: 131625. https://doi.org/10.1016/j.matlet.2021.131625
[21]
Fernández-Jiménez, A., Palomo, A. and Criado, M. (2005) Microstructure Development of Alkali-Activated Fly Ash Cement: A Descriptive Model. CementandConcreteResearch, 35, 1204-1209. https://doi.org/10.1016/j.cemconres.2004.08.021
[22]
Surekha, G., Krishnaiah, K.V., Ravi, N. and Padma Suvarna, R. (2020) FTIR, Raman and XRD Analysis of Graphene Oxide Films Prepared by Modified Hummers Method. JournalofPhysics: ConferenceSeries, 1495, Article ID: 012012. https://doi.org/10.1088/1742-6596/1495/1/012012
[23]
Liu, J., Deng, X., Ma, Z. and Liu, H. (2023) Effect of Alternative Silicon Sources on Alkali-Activated Carbon Steel Slag Binder and Silicon Sources Substitution Mechanism. ResultsinEngineering, 19, Article ID: 101322. https://doi.org/10.1016/j.rineng.2023.101322
[24]
Torres-Luna, J.A. and Carriazo, J.G. (2019) Porous Aluminosilicic Solids Obtained by Thermal-Acid Modification of a Commercial Kaolinite-Type Natural Clay. SolidStateSciences, 88, 29-35. https://doi.org/10.1016/j.solidstatesciences.2018.12.006
[25]
Aliprandi, G., Porfirione, M., Jouenne, C. and Beruto, D. (1996) Matériaux réfractaires et céramiques techniques: Éléments de céramurgie et de technologie. Septima.
[26]
Kumar, S., Kumar, A., Malhotra, T. and Verma, S. (2022) Characterization of Structural, Optical and Photocatalytic Properties of Silver Modified Hematite (α-Fe2O3) Nanocatalyst. JournalofAlloysandCompounds, 904, Article ID: 164006. https://doi.org/10.1016/j.jallcom.2022.164006
[27]
Sekizkardeş, B., Soyer-Uzun, S., Uzun, A., Kuhn, S., Kaya-Özkiper, K. and Kurtoğlu-Öztulum, S.F. (2025) A Comprehensive Review on Red Mud-Based Catalysts: Modification Methods and Applications in Thermal-and Photocatalysis. ChemCatChem, 17, e202401678. https://doi.org/10.1002/cctc.202401678
[28]
Mohd Basri, M.S., Mustapha, F., Mazlan, N. and Ishak, M.R. (2021) Rice Husk Ash-Based Geopolymer Binder: Compressive Strength, Optimize Composition, FTIR Spectroscopy, Microstructural, and Potential as Fire-Retardant Material. Polymers, 13, Article No. 4373. https://doi.org/10.3390/polym13244373
[29]
Yunsheng, Z., Wei, S. and Zongjin, L. (2010) Composition Design and Microstructural Characterization of Calcined Kaolin-Based Geopolymer Cement. AppliedClayScience, 47, 271-275. https://doi.org/10.1016/j.clay.2009.11.002
[30]
Djangang, C., Lecomte, G., Soro, J., et al (2010) Properties of Porous Ceramics from Two Cameroonian Clays Mixed with Sawdust: Elaboration de céramiques poreuses à base de sciure de bois et de deux argiles du Cameroun. 1-16.
[31]
Ma, S., Yang, H., Fu, S., He, P., Duan, X., Yang, Z., et al. (2023) Additive Manufacturing of Geopolymers with Hierarchical Porosity for Highly Efficient Removal of Cs+. JournalofHazardousMaterials, 443, Article ID: 130161. https://doi.org/10.1016/j.jhazmat.2022.130161
[32]
Wang, Y. and Abuel-Naga, H. (2025) Unfired Bricks from Wastes: A Review of Stabiliser Technologies, Performance Metrics, and Circular Economy Pathways. Buildings, 15, Article No. 1861. https://doi.org/10.3390/buildings15111861
[33]
Riyap, H.I., Bewa, C.N., Banenzoué, C., Tchakouté, H.K., Rüscher, C.H., Kamseu, E., et al. (2019) Microstructure and Mechanical, Physical and Structural Properties of Sustainable Lightweight Metakaolin-Based Geopolymer Cements and Mortars Employing Rice Husk. JournalofAsianCeramicSocieties, 7, 199-212. https://doi.org/10.1080/21870764.2019.1606140
[34]
Tan, J., Cai, J., Li, X., Pan, J. and Li, J. (2020) Development of Eco-Friendly Geopolymers with Ground Mixed Recycled Aggregates and Slag. JournalofCleanerProduction, 256, Article ID: 120369. https://doi.org/10.1016/j.jclepro.2020.120369
[35]
Tan, J., Cizer, Ö., Vandevyvere, B., De Vlieger, J., Dan, H. and Li, J. (2022) Efflorescence Mitigation in Construction and Demolition Waste (CDW) Based Geopolymer. JournalofBuildingEngineering, 58, Article ID: 105001. https://doi.org/10.1016/j.jobe.2022.105001
[36]
Wang, D., Ma, B., Pang, L. and Wang, Q. (2024) Alkali-Activated Blast Furnace Ferronickel Slag for Cr Immobilization. CementandConcreteComposites, 150, Article ID: 105560. https://doi.org/10.1016/j.cemconcomp.2024.105560
[37]
Adesanya, E., Ohenoja, K., Luukkonen, T., Kinnunen, P. and Illikainen, M. (2018) One-Part Geopolymer Cement from Slag and Pretreated Paper Sludge. JournalofCleanerProduction, 185, 168-175. https://doi.org/10.1016/j.jclepro.2018.03.007
[38]
Öz, H.Ö., Doğan-Sağlamtimur, N., Bilgil, A., Tamer, A. and Günaydin, K. (2021) Process Development of Fly Ash-Based Geopolymer Mortars in View of the Mechanical Characteristics. Materials, 14, Article No. 2935. https://doi.org/10.3390/ma14112935
[39]
Kabir, S.M.A., Alengaram, U.J., Jumaat, M.Z., Yusoff, S., Sharmin, A. and Bashar, I.I. (2017) Performance Evaluation and Some Durability Characteristics of Environmental Friendly Palm Oil Clinker Based Geopolymer Concrete. JournalofCleanerProduction, 161, 477-492. https://doi.org/10.1016/j.jclepro.2017.05.002
[40]
Liu, M.Y.J., Alengaram, U.J., Jumaat, M.Z. and Mo, K.H. (2014) Evaluation of Thermal Conductivity, Mechanical and Transport Properties of Lightweight Aggregate Foamed Geopolymer Concrete. EnergyandBuildings, 72, 238-245. https://doi.org/10.1016/j.enbuild.2013.12.029
[41]
Zhang, Z., Provis, J.L., Reid, A. and Wang, H. (2015) Mechanical, Thermal Insulation, Thermal Resistance and Acoustic Absorption Properties of Geopolymer Foam Concrete. CementandConcreteComposites, 62, 97-105. https://doi.org/10.1016/j.cemconcomp.2015.03.013
[42]
Alnahhal, A.M., Alengaram, U.J., Ibrahim, M.S.I., Yusoff, S., Metselaar, H.S.C. and Gabriela Johnson, P. (2022) Synthesis of Ternary Binders and Sand-Binder Ratio on the Mechanical and Microstructural Properties of Geopolymer Foamed Concrete. ConstructionandBuildingMaterials, 349, Article ID: 128682. https://doi.org/10.1016/j.conbuildmat.2022.128682
[43]
Mahmoud, H.A., Tawfik, T.A., Abd El-razik, M.M. and Faried, A.S. (2023) Mechanical and Acoustic Absorption Properties of Lightweight Fly Ash/Slag-Based Geopolymer Concrete with Various Aggregates. CeramicsInternational, 49, 21142-21154. https://doi.org/10.1016/j.ceramint.2023.03.244
