全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

3D Electrospinning of Pd/TiO2-Based Nanofibrous Aerogel Catalysts for Catalytic Infrared Heating

DOI: 10.4236/msce.2026.142002, PP. 15-34

Keywords: 3D Electrospinning, Nanofibrous Aerogel, Catalytic Infrared Heating, Catalytic Combustion

Full-Text   Cite this paper   Add to My Lib

Abstract:

Catalytic infrared heating offers an energy-efficient and low-emission alternative to traditional flame-based heating. However, its practical application is limited by the insufficient activity, thermal durability, and structural stability of current catalysts under continuous combustion conditions. In this study, Pd-doped TiO2/SiO2/Y2O3 nanofibrous aerogel catalysts (PTSY-NFAs) with tunable Pd loadings were synthesized via a one-step 3D sol-gel electrospinning technique, followed by calcination. This process resulted in a binder-free, continuously interconnected nanofibrous aerogel framework characterized by high surface area, excellent thermal stability, and strong mechanical resilience. The influence of Pd loading on the microstructure, redox behavior, and catalytic performance was examined systematically. The optimized PTSY-11-NFA catalyst achieved an LPG conversion efficiency of 99% and a peak infrared surface temperature of 587?C. A prototype catalytic infrared heater integrated with this catalyst displayed uniform surface temperatures ranging from 423?C to 509?C and maintained stable long-term operation, surpassing the performance of a commercial catalyst. This study demonstrates a scalable design strategy for noble metal-doped ceramic nanofibrous aerogels aimed at achieving high-efficiency catalytic infrared heating.

References

[1]  Qin, M., Chew, B.T., Yau, Y.H., Wang, X., Wang, C., Luo, X., et al. (2023) Emergency Heater Based on Gas-Fired Catalytic Combustion Infrared Technology: Structure, Evaluation and Thermal Response. Energy, 274, Article ID: 127426.
https://doi.org/10.1016/j.energy.2023.127426
[2]  Jiaqiang, E., Luo, B., Han, D., Chen, J., Liao, G., Zhang, F. and Ding, J. (2022) A Comprehensive Review on Performance Improvement of Micro Energy Mechanical System: Heat Transfer, Micro Combustion and Energy Conversion. Energy, 239, Article ID: 122509.
https://doi.org/10.1016/j.energy.2021.122509
[3]  Rumminger, M.D., Hamlin, R.D. and Dibble, R.W. (1999) Numerical Analysis of a Catalytic Radiant Burner: Effect of Catalyst on Radiant Efficiency and Operability. Catalysis Today, 47, 253-262.
https://doi.org/10.1016/s0920-5861(98)00306-x
[4]  Bei, X., Yu, X., Li, D., Sun, Q., Yu, Y., Wang, Y., et al. (2023) Heat Source Replacement Strategy Using Catalytic Infrared: A Future for Energy Saving Drying of Fruits and Vegetables. Journal of Food Science, 88, 4827-4839.
https://doi.org/10.1111/1750-3841.16834
[5]  Wang, T., Xia, L., Ni, M., Pan, S. and Luo, C. (2024) Fundamentals of Infrared Heating and Their Application in Thermosetting Polymer Curing: A Review. Coatings, 14, Article 875.
https://doi.org/10.3390/coatings14070875
[6]  Ebrahimpour, V. and Esmailpour, K. (2024) Simultaneous Use of Convection and Radiation Heat Transfer for Iranian Pistachio Drying Using Catalytic Heater—Numerical and Experimental Study. Frontiers in Mechanical Engineering, 10, Article 1459806.
https://doi.org/10.3389/fmech.2024.1459806
[7]  Hayes, R.E., Profic-Paczkowska, J., Jędrzejczyk, R. and Mmbaga, J.P. (2025) Catalytic Combustion of Fugitive Methane: Challenges and Current State of the Technology. Applied Sciences, 15, Article 10269.
https://doi.org/10.3390/app151810269
[8]  Jodeiri, N., Mmbaga, J.P., Wu, L., Wanke, S.E. and Hayes, R.E. (2012) Modelling a Counter-Diffusive Reactor for Methane Combustion. Computers & Chemical Engineering, 39, 47-56.
https://doi.org/10.1016/j.compchemeng.2011.12.009
[9]  Wu, B., Ma, Y., Guo, Y., Zielinska, M., Gao, K., Song, C., et al. (2024) Research Progress in the Application of Catalytic Infrared Technology in Fruit and Vegetable Processing. Comprehensive Reviews in Food Science and Food Safety, 23, e13291.
https://doi.org/10.1111/1541-4337.13291
[10]  Liao, H., Zuo, P. and Liu, M. (2016) Study on the Correlation between the Surface Active Species of Pd/Cordierite Monolithic Catalyst and Its Catalytic Activity. Materials Science and Engineering: B, 211, 45-52.
https://doi.org/10.1016/j.mseb.2016.04.015
[11]  Yang, Y., Wang, G., Yang, M., Yang, H., Liu, M. and Dang, F. (2021) Pt Modulates the Electronic Structure of Pd to Improve the Performance of Pd-Based Catalytic Combustion Catalyst. International Journal of Hydrogen Energy, 46, 18391-18400.
https://doi.org/10.1016/j.ijhydene.2021.03.028
[12]  Pi, D., Li, W.Z., Lin, Q.Z., Huang, Q.F., Hu, H.Q. and Shao, C.Y. (2016) Highly Active and Thermally Stable Supported Pd@SiO2 Core-Shell Catalyst for Catalytic Methane Combustion. Energy Technology, 4, 943-949.
https://doi.org/10.1002/ente.201600006
[13]  Na, H., Zhu, T., Liu, Z. and Sun, Y. (2013) Promoting Effect of Zr on the Catalytic Combustion of Methane over Pd/γ-Al2O3 Catalyst. Frontiers of Environmental Science & Engineering, 8, 659-665.
https://doi.org/10.1007/s11783-013-0613-1
[14]  Fessi, S., Ghorbel, A. and Rives, A. (2010) Sol-Gel Synthesis Combined with Solid ex-Change Method, a New Alternative Process to Prepare Improved Pd/ZrO2-Al2O3-SiO2 Catalysts. Studies in Surface Science and Catalysis, 175, 797-800.
[15]  Kucharczyk, B. (2011) Activity of Monolithic Pd/Al2O3 Catalysts in the Combustion of Mine Ventilation Air Methane. PJCT, 13, 57-62.
https://doi.org/10.2478/v10026-011-0050-5
[16]  Xiao, W., Lu, L., Xu, Z., Huang, Y., Zhuang, Q., Qian, X., et al. (2025) A Superelastic Ceramic Aerogel for Flexible Pressure Sensor in Harsh Environment. Composites Part B: Engineering, 292, Article ID: 112110.
https://doi.org/10.1016/j.compositesb.2024.112110
[17]  Cheng, X., Chang, X., Wu, F., Liao, Y., Pan, K., Fong, H., et al. (2024) Advanced Nanofabrication for Elastic Inorganic Aerogels. Nano Research, 17, 8842-8862.
https://doi.org/10.1007/s12274-023-6369-4
[18]  Miao, J., Song, X., Xu, J., Xu, J., Duan, Z., Song, Y., et al. (2025) Ultralight, Elastic, Thermally Insulating, and High-Temperature Resistant Al2O3-SiO2-B2O3 Nanofibrous Aerogels Prepared via the Direct Foaming Method. ACS Applied Materials & Interfaces, 17, 12402-12414.
https://doi.org/10.1021/acsami.4c20475
[19]  Shao, W., Yue, W., Ren, L., Fan, G., Shi, P., He, J., et al. (2025) Al2O3/SiO2 Sponges with a Three-Dimensional Lamellar Structure Based on Solution Blow Spinning for Superior Thermal Insulation and High Temperature Filtration. Separation and Purification Technology, 376, Article ID: 134088.
https://doi.org/10.1016/j.seppur.2025.134088
[20]  Asadi-Pakdel, K., Mehdinavaz Aghdam, R., Shahedi Asl, M. and Faghihi Sani, M.A. (2020) Synthesis and Morphology Optimization of Electrospun SiBNC Nanofibers. Ceramics International, 46, 6052-6059.
https://doi.org/10.1016/j.ceramint.2019.11.063
[21]  Wu, H., Pan, W., Lin, D. and Li, H. (2012) Electrospinning of Ceramic Nanofibers: Fabrication, Assembly and Applications. Journal of Advanced Ceramics, 1, 2-23.
https://doi.org/10.1007/s40145-012-0002-4
[22]  Zhang, X., Wang, F., Dou, L., Cheng, X., Si, Y., Yu, J., et al. (2020) Ultrastrong, Superelastic, and Lamellar Multiarch Structured ZrO2-Al2O3 Nanofibrous Aerogels with High-Temperature Resistance over 1300°C. ACS Nano, 14, 15616-15625.
https://doi.org/10.1021/acsnano.0c06423
[23]  Zhang, X., Cheng, X., Si, Y., Yu, J. and Ding, B. (2022) Elastic and Highly Fatigue Resistant ZrO2-SiO2 Nanofibrous Aerogel with Low Energy Dissipation for Thermal Insulation. Chemical Engineering Journal, 433, Article ID: 133628.
https://doi.org/10.1016/j.cej.2021.133628
[24]  Dou, L., Zhang, X., Shan, H., Cheng, X., Si, Y., Yu, J., et al. (2020) Interweaved Cellular Structured Ceramic Nanofibrous Aerogels with Superior Bendability and Compressibility. Advanced Functional Materials, 30, Article ID: 2005928.
https://doi.org/10.1002/adfm.202005928
[25]  Zhang, M., Wang, Y., Zhang, Y., Song, J., Si, Y., Yan, J., et al. (2020) Conductive and Elastic TiO2 Nanofibrous Aerogels: A New Concept toward Self-Supported Electrocatalysts with Superior Activity and Durability. Angewandte Chemie International Edition, 59, 23252-23260.
https://doi.org/10.1002/anie.202010110
[26]  Dong, S., Maciejewska, B.M., Lißner, M., Thomson, D., Townsend, D., Millar, R., et al. (2023) Unveiling the Mechanism of the in Situ Formation of 3D Fiber Macroassemblies with Controlled Properties. ACS Nano, 17, 6800-6810.
https://doi.org/10.1021/acsnano.3c00289
[27]  Vong, M., Diaz Sanchez, F.J., Keirouz, A., Nuansing, W. and Radacsi, N. (2021) Ultrafast Fabrication of Nanofiber-Based 3D Macrostructures by 3D Electrospinning. Materials & Design, 208, Article ID: 109916.
https://doi.org/10.1016/j.matdes.2021.109916
[28]  Dong, S., Maciejewska, B., Millar, R. and Grobert, N. (2023) 3D Electrospinning of Al2O3/ZrO2 Fibrous Aerogels for Multipurpose Thermal Insulation. Advanced Composites and Hybrid Materials, 6, Article No. 186.
https://doi.org/10.1007/s42114-023-00760-y
[29]  Zhang, X., Liu, Y., Guo, X., Zhang, X., Jin, G., Li, C., et al. (2025) Manipulating Polymerization Degree and Charge Density to Achieve Self-Templated Electrospinning Superelastic Silica Curly Nanofibrous Aerogels for Thermal Insulation. Ceramics International, 51, 38571-38578.
https://doi.org/10.1016/j.ceramint.2025.06.094
[30]  Tian, W., Tang, J., Zhang, M., Chang, M., Chen, X., Sun, J., et al. (2026) Three-dimensional Electrospinning and Catalytic Graphitization Directly Prepared High Flexibility, Elasticity and Graphitization Interwoven Crimp Micro/Nano-Carbon-Fibrous Aerogels. Carbon, 246, Article ID: 120871.
https://doi.org/10.1016/j.carbon.2025.120871
[31]  Ali, S., Al-Marri, M.J., Al-Jaber, A.S., Abdelmoneim, A.G. and Khader, M.M. (2018) Synthesis, Characterization and Performance of Pd-Based Core-Shell Methane Oxidation Nano-Catalysts. Journal of Natural Gas Science and Engineering, 55, 625-633.
https://doi.org/10.1016/j.jngse.2018.01.023
[32]  Fu, J., Cao, S., Yu, J., Low, J. and Lei, Y. (2014) Enhanced Photocatalytic CO2-Reduction Activity of Electrospun Mesoporous TiO2 Nanofibers by Solvothermal Treatment. Dalton Transactions, 43, 9158-9165.
https://doi.org/10.1039/c4dt00181h
[33]  Wang, H., Li, W., Wang, J., Chang, H., Jameel, H., Zhang, Q., et al. (2017) A Ternary Composite Oxides S2O82−/ZrO2-TiO2-SiO2 as an Efficient Solid Super Acid Catalyst for Depolymerization of Lignin. RSC Adv., 7, 50027-50034.
https://doi.org/10.1039/c7ra09489b
[34]  Zangeneh, H., Zinatizadeh, A.A., Zinadini, S., Feyzi, M. and Bahnemann, D.W. (2019) Preparation and Characterization of a Novel Photocatalytic Self-Cleaning PES Nanofiltration Membrane by Embedding a Visible-Driven Photocatalyst Boron Doped-TiO2SiO2/CoFe2O4 Nanoparticles. Separation and Purification Technology, 209, 764-775.
https://doi.org/10.1016/j.seppur.2018.09.030
[35]  Khung, Y.L., Rusli, S. and Hsiao, Y. (2022) Thermal Grafting of Aniline Derivatives to Silicon (1 1 1) Hydride Surfaces. Applied Surface Science, 580, Article ID: 152257.
https://doi.org/10.1016/j.apsusc.2021.152257
[36]  Zhu, F., Wen, J., Guo, H., An, J., Wang, G., Ren, G., et al. (2023) Low-temperature Catalytic Performance Improvement of Ru/TiO2{001} for O-Dichlorobenzene Oxidation. Chemical Engineering Journal, 473, Article ID: 145186.
https://doi.org/10.1016/j.cej.2023.145186
[37]  Bi, W., Wu, Y., Chen, C., Zhou, D., Song, Z., Li, D., et al. (2020) Dye Sensitization and Local Surface Plasmon Resonance-Enhanced Upconversion Luminescence for Efficient Perovskite Solar Cells. ACS Applied Materials & Interfaces, 12, 24737-24746.
https://doi.org/10.1021/acsami.0c04258
[38]  Wang, C., Tang, Y., Geng, Z., Guo, Y., Tan, X., Hu, Z., et al. (2023) Modulating Charge Accumulation via Electron Interaction for Photocatalytic Hydrogen Evolution: A Case of Fabricating Palladium Sites on ZnIn2S4 Nanosheets. ACS Catalysis, 13, 11687-11696.
https://doi.org/10.1021/acscatal.3c02563
[39]  Xu, Z., Jiang, J., Wang, M., Wang, J., Tang, Y., Li, S., et al. (2023) Enhanced Levofloxacin Degradation by Hierarchical Porous Co3O4 with Rich Oxygen Vacancies Activating Peroxymonosulfate: Performance and Mechanism. Separation and Purification Technology, 304, Article ID: 122055.
https://doi.org/10.1016/j.seppur.2022.122055
[40]  Hao, C., Zhao, Y., Zhou, Y., Zhou, L., Xu, Y., Wang, D., et al. (2007) Interactions between Metal Chlorides and Poly(Vinyl Pyrrolidone) in Concentrated Solutionsand Solid-State Films. Journal of Polymer Science Part B: Polymer Physics, 45, 1589-1598.
https://doi.org/10.1002/polb.21138
[41]  Ren, Y., Zhang, B., Ye, J., Zhang, H., Zhong, Z., Wang, Y., et al. (2023) Design and Preparation of Novel Y2O3-SiO2 Composite Aerogels for High-Temperature Thermal Insulators. Journal of Non-Crystalline Solids, 605, Article ID: 122177.
https://doi.org/10.1016/j.jnoncrysol.2023.122177
[42]  Letichevsky, S., Zonetti, P.C., Reis, P.P.P., Celnik, J., Rabello, C.R.K., Gaspar, A.B., et al. (2015) The Role of M-ZrO2 in the Selective Oxidation of Ethanol to Acetic Acid Employing PdO/m-ZrO2. Journal of Molecular Catalysis A: Chemical, 410, 177-183.
https://doi.org/10.1016/j.molcata.2015.09.012
[43]  Schwartz, W.R. and Pfefferle, L.D. (2012) Combustion of Methane over Palladium-Based Catalysts: Support Interactions. The Journal of Physical Chemistry C, 116, 8571-8578.
https://doi.org/10.1021/jp2119668

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133