全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

PEEK填充PTFE的力学和摩擦学性能的实验研究
Experimental Study on the Mechanical and Tribological Properties of PEEK Filled with PTFE

DOI: 10.12677/ms.2026.162021, PP. 44-50

Keywords: 聚四氟乙烯,聚醚醚酮,力学性能,摩擦学性能,实验研究
Polytetrafluoroethylene
, Polyetheretherketone, Mechanical Properties, Tribological Properties, Experimental Study

Full-Text   Cite this paper   Add to My Lib

Abstract:

以聚四氟乙烯(PTFE)和聚醚醚酮(PEEK)为原材料,制备了PEEK/PTFE复合材料。研究了10% PEEK对PTFE的力学性能、摩擦学性能的影响。结果表明,在力学性能方面,添加10% PEEK的PEEK/PTFE复合材料的抗拉强度比纯PTFE提升了11.51%,抗压强度提升了40.76%,断裂伸长率降低了16.21%。在摩擦学性能方面,磨损率降低了实现了17.65%。通过扫描电镜观察磨损后的表面形貌,揭示了PEEK对PEEK/PTFE复合材料摩擦性能的影响规律,为研发新型PTFE基复合材料提供理论参考。
PEEK/PTFE composites were prepared using polytetrafluoroethylene (PTFE) and polyetheretherketone (PEEK) as raw materials. The effect of 10% peek on the mechanical and tribological properties of PTFE was studied. The results showed that the tensile strength, compressive strength and elongation at break of PEEK/PTFE composites with 10% peek were 11.51%, 40.76% and 16.21% higher than those of pure PTFE. In terms of tribological properties, the wear rate was reduced by 17.65%. The effect of peek on the friction properties of PEEK/PTFE composites was revealed by observing the worn surface morphology with SEM, which provided a theoretical reference for the development of new PTFE matrix composites.

References

[1]  陈战, 王家序, 郑小光, 等. 聚四氟乙烯工程材料的摩擦磨损性能研究[J]. 机械工程学报, 2002, 38(4): 74-77.
[2]  解挺, 江凯, 丁亚. 填料粒径对Cu/PTFE复合材料摩擦学性能影响的数值模拟[J]. 摩擦学学报, 2016(1): 38-44.
[3]  Tang, A., Wang, M., Huang, W. and Wang, X. (2015) Composition Design of Ni-NaNO-Al2O3-PTFE Coatings and Their Tribological Characteristics. Surface and Coatings Technology, 282, 121-128.
https://doi.org/10.1016/j.surfcoat.2015.10.034
[4]  张招柱, 薛群基, 沈维长, 等. 金属填充PTFE复合材料的摩擦磨损性能研究[J]. 高分子材料科学与工程, 1999, 17(1): 68-72.
[5]  Lv, M., Wang, L., Liu, J., Kong, F., Ling, A., Wang, T., et al. (2019) Surface Energy, Hardness, and Tribological Properties of Carbon-Fiber/Polytetrafluoroethylene Composites Modified by Proton Irradiation. Tribology International, 132, 237-243.
https://doi.org/10.1016/j.triboint.2018.12.028
[6]  Wu, H., Zhu, L., Yue, W., Fu, Z. and Kang, J. (2019) Wear-Resistant and Hydrophobic Characteristics of PTFE/CF Composite Coatings. Progress in Organic Coatings, 128, 90-98.
https://doi.org/10.1016/j.porgcoat.2018.12.013
[7]  Desale, D.D. and Pawar, H.B. (2018) Performance Analysis of Polytetrafluoroethylene as Journal Bearing Material. Procedia Manufacturing, 20, 414-419.
https://doi.org/10.1016/j.promfg.2018.02.060
[8]  Gweon, J.H., Joo, B.S. and Jang, H. (2016) The Effect of Short Glass Fiber Dispersion on the Friction and Vibration of Brake Friction Materials. Wear, 362, 61-67.
https://doi.org/10.1016/j.wear.2016.05.004
[9]  Song, F., Wang, Q. and Wang, T. (2016) Effects of Glass Fiber and Molybdenum Disulfide on Tribological Behaviors and PV Limit of Chopped Carbon Fiber Reinforced Polytetrafluoroethylene Composites. Tribology International, 104, 392-401.
https://doi.org/10.1016/j.triboint.2016.01.015
[10]  Aderikha, V.N., Krasnov, A.P., Naumkin, A.V. and Shapovalov, V.A. (2017) Effects of Ultrasound Treatment of Expanded Graphite (EG) on the Sliding Friction, Wear Resistance, and Related Properties of PTFE-Based Composites Containing EG. Wear, 386, 63-71.
https://doi.org/10.1016/j.wear.2017.04.022
[11]  Trabelsi, M., Kharrat, M. and Dammak, M. (2016) On the Friction and Wear Behaviors of PTFE Based Composites Filled with MoS2 and/or Bronze Particles. Transactions of the Indian Institute of Metals, 69, 1119-1128.
https://doi.org/10.1007/s12666-015-0666-x
[12]  Jin, Z., Chen, X., Wang, Y. and Wang, D. (2015) Thermal Conductivity of PTFE Composites Filled with Graphite Particles and Carbon Fibers. Computational Materials Science, 102, 45-50.
https://doi.org/10.1016/j.commatsci.2015.02.019
[13]  苏峰华, 张招柱, 王坤, 等. MoS2和PTFE改性炭纤维织物复合材料的摩擦磨损性能研究[J]. 摩擦学学报, 2005, 25(4): 338-342.
[14]  Zhang, Z., Liu, W. and Xue, Q. (2001) Effects of Various Kinds of Fillers on the Tribological Behavior of Polytetrafluoroethylene Composites under Dry and Oil-Lubricated Conditions. Journal of Applied Polymer Science, 80, 1891-1897.
https://doi.org/10.1002/app.1286
[15]  Qi, Y., Gong, J., Cao, W.H., Wang, H.G., et al. (2018) Tribological Behavior of PTFE Composites Filled with PEEK and NaNo-Al2O3. Tribology Transactions, 61, 694-704.
https://doi.org/10.1080/10402004.2017.1395099
[16]  Wang, Y., Gong, J., Yang, D., Gao, G., Ren, J., Mu, B., et al. (2014) Tribological Behavior of Nano-Al2O3-Reinforced PPS-PTFE Composites. Tribology Transactions, 57, 173-181.
https://doi.org/10.1080/10402004.2013.861567
[17]  Shi, Y.J., Feng, X., Wang, H.Y., Liu, C. and Lu, X.H. (2007) Effects of Filler Crystal Structure and Shape on the Tribological Properties of PTFE Composites. Tribology International, 40, 1195-1203.
https://doi.org/10.1016/j.triboint.2006.12.006
[18]  Burris, D.L. and Sawyer, W.G. (2006) Improved Wear Resistance in Alumina-PTFE Nanocomposites with Irregular Shaped Nanoparticles. Wear, 260, 915-918.
https://doi.org/10.1016/j.wear.2005.06.009
[19]  Wang, Q., Xue, Q. and Shen, W. (1997) The Friction and Wear Properties of Nanometre SiO2 Filled Polyetheretherketone. Tribology International, 30, 193-197.
https://doi.org/10.1016/s0301-679x(96)00042-4
[20]  佟伟. 聚苯硫醚摩擦复合材料的研究[D]: [硕士学位论文]. 成都: 四川大学, 2006.
[21]  楚婷婷, 李媛媛, 孙小波, 等. 聚醚醚酮/聚四氟乙烯复合水润滑轴承材料性能研究[J]. 轴承, 2015(5): 35-37.
[22]  王枫, 孙小波, 时连卫. 聚四氟乙烯/聚醚醚酮复合保持架材料性能试验分析[J]. 轴承, 2013(3): 38-40.
[23]  张潜, 汤赫男, 王妍, 等. 聚醚醚酮增强聚四氟乙烯力学性能模拟研究[J]. 润滑与密封, 2023, 48(1): 85-89.
[24]  王妍, 汤赫男, 赵晶, 等. 聚醚醚酮增强聚四氟乙烯摩擦学性能模拟研究[J]. 润滑与密封, 2024, 49(8): 44-49.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133