全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

气凝胶材料的分类研究进展
Research Progress on Classification of Aerogel Materials

DOI: 10.12677/aac.2026.162008, PP. 68-73

Keywords: 气凝胶,分类,无机气凝胶,有机气凝胶,生物基气凝胶,杂化气凝胶
Aerogel
, Classification, Inorganic Aerogel, Organic Aerogel, Bio-Based Aerogels, Hybrid Aerogels

Full-Text   Cite this paper   Add to My Lib

Abstract:

气凝胶作为一种由纳米多孔网络构成的三维固体材料,因其超低密度、高孔隙率、低导热系数等独特性能,在隔热、吸附、催化、能源及生物医学等领域展现出广阔的应用前景。自20世纪30年代首次报道以来,气凝胶家族已发展出丰富多样的材料体系。本文旨在从材料分类学的视角,对气凝胶的研究进展进行系统综述。文章首先介绍气凝胶的通用制备原理,随后按照材料来源和化学组成,将气凝胶划分为无机气凝胶、有机聚合物气凝胶、碳气凝胶、生物基气凝胶以及多组分杂化气凝胶五大类别。文章详细阐述了各类气凝胶的典型代表、结构特征、核心性能优势及当前面临的主要挑战,并通过各类别之间的对比分析,揭示气凝胶材料从单一性能优化向多功能协同发展的演化规律,为新型气凝胶材料的设计与应用开发提供参考。
As a three-dimensional solid material composed of nanoporous networks, aerogels have shown broad application prospects in the fields of heat insulation, adsorption, catalysis, energy and biomedicine due to their unique properties such as ultra-low density, high porosity and low thermal conductivity. Since it was first reported in the 1930 s, the aerogel family has developed a rich and diverse material system. This paper aims to systematically review the research progress of aerogels from the perspective of material taxonomy. The article first introduces the general preparation principle of aerogels, and then divides aerogels into inorganic aerogels, organic polymer aerogels, carbon aerogels, bio-based aerogels, and multi-component hybrid aerogels according to material sources and chemical composition. In this paper, the typical representatives, structural characteristics, core performance advantages and current main challenges of various aerogels are described in detail. Through the comparative analysis between various categories, the evolution law of aerogel materials from single performance optimization to multi-functional collaborative development is revealed, which provides a reference for the design and application development of new aerogel materials.

References

[1]  Kistler, S.S. (2002) Coherent Expanded-Aerogels. The Journal of Physical Chemistry, 36, 52-64.
https://doi.org/10.1021/j150331a003

[2]  Almeida, C.M.R., Ghica, M.E. and Durães, L. (2020) An Overview on Alumina-Silica-Based Aerogels. Advances in Colloid and Interface Science, 282, Article ID: 102189.
https://doi.org/10.1016/j.cis.2020.102189

[3]  Maleki, H., Durães, L. and Portugal, A. (2014) An Overview on Silica Aerogels Synthesis and Different Mechanical Reinforcing Strategies. Journal of Non-Crystalline Solids, 385, 55-74.
https://doi.org/10.1016/j.jnoncrysol.2013.10.017

[4]  Chen, M., Li, Z., Li, J., Li, J., Li, Q. and Zhang, L. (2017) The Extraction of Uranium Using Graphene Aerogel Loading Organic Solution. Talanta, 166, 284-291.
https://doi.org/10.1016/j.talanta.2017.01.070

[5]  Hrubesh, L.W. and Pekala, R.W. (1994) Thermal Properties of Organic and Inorganic Aerogels. Journal of Materials Research, 9, 731-738.
https://doi.org/10.1557/jmr.1994.0731

[6]  Zhang, Y.G., Zhu, Y.J., Xiong, Z.C., Wu, J. and Chen, F. (2018) Bioinspired Ultralight Inorganic Aerogel for Highly Efficient Air Filtration and Oil-Water Separation. ACS Applied Materials & Interfaces, 10, 13019-13027.
https://doi.org/10.1021/acsami.8b02081

[7]  Abdullah, Zou, Y., Farooq, S., Walayat, N., Zhang, H., Faieta, M., et al. (2023) Bio-Aerogels: Fabrication, Properties and Food Applications. Critical Reviews in Food Science and Nutrition, 63, 6687-6709.
https://doi.org/10.1080/10408398.2022.2037504

[8]  Pekala, R.W. and Kong, F.M. (1989) A Synthetic Route to Organic Aerogels—Mechanism, Structure, and Properties. Le Journal de Physique Colloques, 24, C4-33-C4-40.
https://doi.org/10.1051/jphyscol:1989406

[9]  Veselá, P. and Slovák, V. (2012) Pyrolysis of N-Doped Organic Aerogels with Relation to Sorption Properties. Journal of Thermal Analysis and Calorimetry, 108, 475-480.
https://doi.org/10.1007/s10973-011-1949-z

[10]  Hu, E., Zhu, Y., Cheng, X., Liu, Q. and Zhu, M. (2024) Recent Progress on Organic Aerogels for Sound Absorption. Materials Today Communications, 39, Article ID: 109243.
https://doi.org/10.1016/j.mtcomm.2024.109243

[11]  Aney, S., Schettler, J., Schwan, M., Milow, B. and Rege, A. (2021) Insights into the Micromechanics of Organic Aerogels Based on Experimental and Modeling Results. Advanced Engineering Materials, 24, Article ID: 2100095.
https://doi.org/10.1002/adem.202100095

[12]  Wang, X., Zhao, K., Cao, W., Ji, D., Ye, Z., Su, Z., et al. (2024) Polyimide-Coating-on-Aramid Nanofiber Strategy toward Ultralight Organic Aerogels with Multifunctional Properties. Chemical Engineering Journal, 499, Article ID: 155939.
https://doi.org/10.1016/j.cej.2024.155939

[13]  Pantazidis, C., Wang, C. and Tomović, Ž. (2024) High‐Performance Organic Aerogels Tailored for Versatile Recycling Approaches: Recycling‐Reforming‐Upcycling. Small, 20, Article ID: 2403931.
https://doi.org/10.1002/smll.202403931

[14]  Chen, Z., Fu, X., Liu, R., Song, Y. and Yin, X. (2023) Fabrication, Performance, and Potential Applications of Mxene Composite Aerogels. Nanomaterials, 13, Article No. 2048.
https://doi.org/10.3390/nano13142048

[15]  Parakkulam Ramaswamy, A. and Rigacci, A. (2021) Superinsulating Composite Aerogels from Polymethylsilsesquioxane and Kapok Fibers. Materials Chemistry and Physics, 261, Article ID: 124252.
https://doi.org/10.1016/j.matchemphys.2021.124252

[16]  Liu, B., Gao, M., Liu, X., Zhao, X., Zhang, J. and Yi, X. (2019) Thermally Stable Nanoporous ZrO2/SiO2 Hybrid Aerogels for Thermal Insulation. ACS Applied Nano Materials, 2, 7299-7310.
https://doi.org/10.1021/acsanm.9b01791

[17]  Liu, Z., Ran, Y., Xi, J. and Wang, J. (2020) Polymeric Hybrid Aerogels and Their Biomedical Applications. Soft Matter, 16, 9160-9175.
https://doi.org/10.1039/d0sm01261k

[18]  Tan, M., Wang, J., Song, W., Fang, J. and Zhang, X. (2019) Self-Floating Hybrid Hydrogels Assembled with Conducting Polymer Hollow Spheres and Silica Aerogel Microparticles for Solar Steam Generation. Journal of Materials Chemistry A, 7, 1244-1251.
https://doi.org/10.1039/c8ta10057h

[19]  Li, T., Du, A., Zhang, T., Ding, W., Liu, M., Shen, J., et al. (2018) Efficient Preparation of Crack-Free, Low-Density and Transparent Polymethylsilsesquioxane Aerogels via Ambient Pressure Drying and Surface Modification. RSC Advances, 8, 17967-17975.
https://doi.org/10.1039/c8ra03061h

[20]  Chiappim, W., Awano, C.M., Donatti, D.A., de Vicente, F.S. and Vollet, D.R. (2014) Structure of Hydrophobic Ambient-Pressure-Dried Aerogels Prepared by Sonohydrolysis of Tetraethoxysilane with Additions of n,n-Dimethylformamide. Langmuir, 30, 1151-1159.
https://doi.org/10.1021/la403798t

[21]  Parale, V.G., Kim, T., Phadtare, V.D., Yadav, H.M. and Park, H. (2019) Enhanced Photocatalytic Activity of a Mesoporous TiO2 Aerogel Decorated onto Three-Dimensional Carbon Foam. Journal of Molecular Liquids, 277, 424-433.
https://doi.org/10.1016/
j.molliq.2018.12.080

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133