全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

基于稳定二维BA2PbBr4的X射线探测研究
Research on X-Ray Detection Based on Stable Two-Dimensional BA2PbBr4

DOI: 10.12677/app.2026.163010, PP. 104-111

Keywords: 光电探测器,二维钙钛矿单晶,X射线探测
Photodetector
, Two-Dimensional Perovskite Single Crystal, X-Ray Detection

Full-Text   Cite this paper   Add to My Lib

Abstract:

卤化物钙钛矿因其优异的光电性能和可调谐的能带结构而备受关注,然而其环境稳定性仍是实际应用的瓶颈。具有长链有机配体的二维卤化物钙钛矿,兼具强量子限域效应、高集成性和优异的环境稳定性等优势。本研究通过降温结晶法成功制备高质量BA2PbBr4单晶,并构建二维BA2PbBr4光电探测器。在紫外探测方面,器件表现出0.035 A?W1的响应度与极低的暗电流(2.11 × 1012 A)。更重要的是,该探测器也展现出优异的X射线探测能力,其灵敏度高达39,514 μC?Gyair1 cm2,最低可探测剂量率为19.78 nGyair?s1。得益于有机配体对无机层间的有效隔离,该器件展现出卓越的环境稳定性,在空气中暴露一周后,其紫外探测性能仍能保持初始值的86.74%。本研究为开发高效稳定的钙钛矿光电子器件提供了可行的材料选择与结构设计思路。
Halide perovskites have attracted much attention due to their excellent photoelectric properties and tunable band structure. However, their environmental stability remains a bottleneck for practical applications. Two-dimensional halide perovskites with long-chain organic ligands possess advantages such as strong quantum confinement effect, high integration, and excellent environmental stability. In this study, high-quality BA2PbBr4 single crystals were successfully prepared by cooling crystallization method, and a two-dimensional BA2PbBr4 photodetector was constructed. In the UV detection aspect, the device exhibited a response rate of 0.035 A?W1 and extremely low dark current (2.11 × 1012 A). More importantly, this detector also demonstrated excellent X-ray detection capability, with a sensitivity of up to 39,514 μC?Gyair1 cm2 and a minimum detectable dose rate of 19.78 nGyair?s1. Thanks to the effective isolation of the inorganic layers by the organic ligands, this device exhibits outstanding environmental stability. After being exposed to air for one week, its UV detection performance still maintained 86.74% of the initial value. This study provides feasible material selection and structural design ideas for the development of efficient and stable perovskite photonic devices.

References

[1]  Yan, Z., Yang, H., Yang, Z., Ji, C., Zhang, G., Tu, Y., et al. (2022) Emerging Two‐Dimensional Tellurene and Tellurides for Broadband Photodetectors. Small, 18, Article ID: 2200016.
https://doi.org/10.1002/smll.202200016
[2]  Li, L., Xu, H., Li, Z., Liu, L., Lou, Z. and Wang, L. (2023) CMOS‐Compatible Tellurium/Silicon Ultra‐Fast Near‐Infrared Photodetector. Small, 19, Article ID: 2303114.
https://doi.org/10.1002/smll.202303114
[3]  Fu, W., Chen, H. and Jen, A.K.Y. (2021) Two-Dimensional Perovskites for Photovoltaics. Materials Today Nano, 14, Article ID: 100117.
https://doi.org/10.1016/j.mtnano.2021.100117
[4]  Park, B., Beak, S., Yang, J., Hwang, S., Kwon, J., Yoon, J., et al. (2025) Tellurium/Silicon Based P-N Photodiode for near Infrared Heterostructure Photodetector Applications. Applied Surface Science, 687, Article ID: 162242.
https://doi.org/10.1016/j.apsusc.2024.162242
[5]  Cao, F., Liu, L. and Li, L. (2023) Short-Wave Infrared Photodetector. Materials Today, 62, 327-349.
https://doi.org/10.1016/j.mattod.2022.11.003
[6]  Zhu, X., Cai, Z., Wu, Q., Wu, J., Liu, S., Chen, X., et al. (2024) 2D Black Phosphorus Infrared Photodetectors. Laser & Photonics Reviews, 19, Article ID: 2400703.
https://doi.org/10.1002/lpor.202400703
[7]  Pei, H., Wu, X.L., Wu, X., et al. (2025) Challenges in the Controllable Synthesis of 2D Materials. Nano Research, 19, Article ID: 94908092.
[8]  Zhang, X., Zhao, S., Zhang, J. and Wang, L. (2024) Materials Design and Preparation of Ultrathin Two-Dimensional Metal Halide Perovskites. Nano Research, 17, 6231-6246.
https://doi.org/10.1007/s12274-024-6648-8
[9]  Leung, T.L., Ahmad, I., Syed, A.A., Ng, A.M.C., Popović, J. and Djurišić, A.B. (2022) Stability of 2D and Quasi-2d Perovskite Materials and Devices. Communications Materials, 3, Article No. 63.
https://doi.org/10.1038/s43246-022-00285-9
[10]  Wang, B., Iocozzia, J., Zhang, M., Ye, M., Yan, S., Jin, H., et al. (2019) The Charge Carrier Dynamics, Efficiency and Stability of Two-Dimensional Material-Based Perovskite Solar Cells. Chemical Society Reviews, 48, 4854-4891.
https://doi.org/10.1039/c9cs00254e
[11]  Amani, M., Tan, C., Zhang, G., Zhao, C., Bullock, J., Song, X., et al. (2018) Solution-Synthesized High-Mobility Tellurium Nanoflakes for Short-Wave Infrared Photodetectors. ACS Nano, 12, 7253-7263.
https://doi.org/10.1021/acsnano.8b03424
[12]  Zhou, Q., Duan, J., Duan, Y. and Tang, Q. (2022) Review on Engineering Two-Dimensional Nanomaterials for Promoting Efficiency and Stability of Perovskite Solar Cells. Journal of Energy Chemistry, 68, 154-175.
https://doi.org/10.1016/j.jechem.2021.09.017
[13]  Guo, S., Liu, B., Peng, S., Li, T., Wang, Y. and Deng, X. (2026) Planting 2D Perovskite Seeds to Prepare Mixed-Dimensional Perovskite Solar Cells with High Stability. Chemical Engineering Journal, 527, Article ID: 171498.
https://doi.org/10.1016/j.cej.2025.171498
[14]  Baskoro, F., Chiang, P., Tran, T.T.B., Wong, H.Q., Sumboja, A., Nie, W., et al. (2026) 2D and 3D Organic/Inorganic Hybrid Perovskites for Electrochemical Energy Storage Applications. Journal of Materials Chemistry A.
https://doi.org/10.1039/d5ta06470h
[15]  Ou, X. and Gao, F. (2024) Blossoms in Perovskite Planar X-Ray Detectors. Nature Communications, 15, Article No. 5754.
https://doi.org/10.1038/s41467-024-50179-2
[16]  Zha, J., Luo, M., Ye, M., Ahmed, T., Yu, X., Lien, D., et al. (2021) Infrared Photodetectors Based on 2D Materials and Nanophotonics. Advanced Functional Materials, 32, Article ID: 2111970.
https://doi.org/10.1002/adfm.202111970
[17]  Wang, Y., Li, M., Chai, Z., Wang, Y. and Wang, S. (2023) Perovskite Scintillators for Improved X‐ray Detection and Imaging. Angewandte Chemie International Edition, 62, e202304638.
https://doi.org/10.1002/anie.202304638
[18]  Snow, J., Olson, C., Torres, E., Shirley, K. and Cazalas, E. (2024) A Perovskite-Graphene Device for X-Ray Detection. Carbon, 216, Article ID: 118586.
https://doi.org/10.1016/j.carbon.2023.118586
[19]  Xing, Y., He, H., Cui, Z., Fu, Z., Qin, S., Zhang, W., et al. (2024) Recent Advances in Optical Properties and Light‐emitting Diode Applications for 2D Tin Halide Perovskites. Advanced Optical Materials, 12, Article ID: 2302679.
https://doi.org/10.1002/adom.202302679
[20]  Di Carlo, A., Agresti, A., Brunetti, F. and Pescetelli, S. (2020) Two-Dimensional Materials in Perovskite Solar Cells. Journal of Physics: Energy, 2, Article ID: 031003.
https://doi.org/10.1088/2515-7655/ab9eab
[21]  Shi, E., Yuan, B., Shiring, S.B., Gao, Y., Akriti, Guo, Y., et al. (2020) Two-Dimensional Halide Perovskite Lateral Epitaxial Heterostructures. Nature, 580, 614-620.
https://doi.org/10.1038/s41586-020-2219-7
[22]  Wang, K., Wu, C., Yang, D., Jiang, Y. and Priya, S. (2018) Quasi-Two-Dimensional Halide Perovskite Single Crystal Photodetector. ACS Nano, 12, 4919-4929.
https://doi.org/10.1021/acsnano.8b01999
[23]  Zhang, Y., Li, S., Li, Z., Liu, H., Liu, X., Chen, J., et al. (2020) High-Performance Two-Dimensional Perovskite Ca2Nb3O10 UV Photodetectors. Nano Letters, 21, 382-388.
https://doi.org/10.1021/acs.nanolett.0c03759
[24]  Zhou, H., Lai, H., Sun, X., Zhang, N., Wang, Y., Liu, P., et al. (2022) Van Der Waals MoS2/Two-Dimensional Perovskite Heterostructure for Sensitive and Ultrafast Sub-Band-Gap Photodetection. ACS Applied Materials & Interfaces, 14, 3356-3362.
https://doi.org/10.1021/acsami.1c15861
[25]  Gao, W., Niu, K., Tao, Q., Ding, S., Zhang, J., Yu, L., et al. (2025) Patterning Halide Perovskite Monocrystalline Arrays via Dry Imprinting Transfer. ACS Nano, 19, 34273-34282.
https://doi.org/10.1021/acsnano.5c11433
[26]  Li, Y., Chen, L., Liu, B., Jin, P., Gao, R., Zhou, L., et al. (2021) Scintillation Performance of Two-Dimensional Perovskite (Ba)2PbBr4 Microcrystals. Journal of Materials Chemistry C, 9, 17124-17128.
https://doi.org/10.1039/d1tc04072c
[27]  Seitz, M., Gant, P., Castellanos-Gomez, A. and Prins, F. (2019) Long-Term Stabilization of Two-Dimensional Perovskites by Encapsulation with Hexagonal Boron Nitride. Nanomaterials, 9, Article 1120.
https://doi.org/10.3390/nano9081120
[28]  Thompson, M., Ellison, S.L.R. and Wood, R. (2002) Harmonized Guidelines for Single-Laboratory Validation of Methods of Analysis (IUPAC Technical Report). Pure and Applied Chemistry, 74, 835-855.
https://doi.org/10.1351/pac200274050835

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133