Circuit breakers and other electrical equipment are often exposed to operational challenges caused by dust contamination, particularly short-circuit failures. These issues are frequently linked to the deposition of aerosols containing compounds such as aluminium oxide (Al2O3), calcium oxide (CaO), iron oxide (Fe2O3), and silicon dioxide (SiO2) on critical components. While previous research has examined the influence of individual dust species—especially silica—on circuit breaker performance, these studies primarily focused on isolated effects, neglecting the combined thermodynamic impact of multiple aerosol constituents. In reality, environmental dust often comprises a mixture of species, including Al2O3, CaO, Fe2O3, and CO, which can vary significantly depending on the geographical context. This study aims to assess the influence of such aerosols on the thermodynamic properties of air plasma under atmospheric pressure and local thermodynamic equilibrium conditions, across a temperature range of 2000 K to 30,000 K. The properties, including mass enthalpy, specific heat at constant pressure, sound velocity, and mass density, are computed directly from the population densities of the relevant species. Results reveal that the presence of aerosol mixtures alters the thermodynamic behaviour of the arc plasma during circuit interruption. Notably, reductions in mass enthalpy, specific heat, and sound velocity are observed with increasing temperature, while specific heat increases at temperatures below 7000 K. Additionally, mass density is found to increase with temperature. These findings suggest that aerosol contamination during the interruption phase can degrade circuit breaker performance, potentially resulting in residual leakage currents or fire risks due to incomplete arc quenching.
References
[1]
Louvert, S. (2008) Modulations intrasaisonnières de la mousson d’Afrique de l’Ouest et impacts sur les vecteurs du paludisme à Ndiop (Sénégal): diagnostics et prévisibilité. Ph.D. Thesis, Université de Bourgogne (France).
[2]
Legrand, M. (1990) Étude des aérosols sahariens au-dessus de l’Afrique à l’aide du canal à 10 microns de METEOSAT: Visualisation, interprétation et modélisation. Ph.D. Thesis, Université des Sciences et Techniques de Lille Flandres Artois (France).
[3]
Malavelle, F. (2011) Effets direct et semi-direct des aérosols en Afrique de l’Ouest pendant la saison sèche. Ph.D. Thesis, Université Toulouse III Paul Sabatier (France).
[4]
Pancrati, O. (2003) Analyse et modélisation des impacts des aérosols sahéliens sur le cycle hydrologique en Afrique de l’Ouest: Rôle des poussières et de la biomasse brûlée. Ph.D. Thesis, Université des Sciences et Technologies de Lille (France).
[5]
Bouh, H.A., Benyaich, F., Bounakhla, M., Noack, Y., Tahri, M. and Zahry, F. (2013) Variations Saisonnières des particules atmosphériques et ses composants chimiques dans la Ville de Meknès-Maroc. Journal of Materials and Environmental Science, 4, 49-62.
[6]
Antenne, G.J.Y. (1985) Le phénomène des brumes sèches au Sénégal. Bulletin n7 de l’ORSTOM et du Centre de Météorologie Spatiale (Sénégal).
[7]
Tobias, C. and Megie, C. (1980-1981) Les lithométéores au Tchad: Premiers résultats concernant la nature, la composition et l'importance des aérosols transportés par voie atmosphérique dans la région de N’Djamena (Tchad). Office de la Recherche Scientifique et Technique Outre-Mer, 18, 71-81.
[8]
Herrmann, L., Bleich, K.E., Sterk and Stahr, K. (310) Dépôt des poussières sur les sols en Afrique de l’Ouest: Propriétés et source des poussières et influence sur les propriétés des sols et sites. Year Université de Hohenheim, Institut pour la Science du sol et Ecologie.
[9]
Orange, D. and Gac, J.Y. (1993) Geochemical Assessment of Atmospheric Deposition Including Harmattan Dust in Continental West Africa. Proc. IAHS.
[10]
Orange, D. and Gac, J.Y. (1990) Bilan géochimique des apports atmosphériques en domaines sahélienne et sou-dano-guinéen d'Afrique de l’ouest (bassins supérieurs du Sénégal et de la Gambie). Géodynamique, 5, 51-65.
[11]
Doumbia, E.H.T. (2012) Caractérisation physico-chimique de la pollution atmosphérique en Afrique de l’Ouest et étude d’impact sur la santé. Ph.D. Thesis, Université Toulouse III-Paul Sabatier (France).
[12]
Michaud, V. (2009) Modélisation et diagnostic de plasmas thermiques utilisés pour la coupure de l’arc électrique. Ph.D. Thesis, Université Blaise Pascal de Clermont-Ferrand (France).
[13]
Flament, P., Deboudt, K., Cachier, H., Châtenet, B. and Mériaux, X. (2011) Mineral Dust and Carbonaceous Aerosols in West Africa: Source Assessment and Characterization. Atmospheric Environment, 45, 3742-3749. https://doi.org/10.1016/j.atmosenv.2011.04.013
[14]
Lemaître, C. (2011) Détermination du chauffage radiatif des aérosols désertiques au dessus de l’Afrique de l’Ouest et de leur impact sur la dynamique atmosphérique à l’aide d’observations satellitaires au cours de la campagne AMMA. Ph.D. Thesis, Université Paris VI.
[15]
André, P., Courty, M.A., Kagoné, A.K., Koalaga, Z.K., Kohio, N.K. and Zougmoré, F. (2016) Calcul de la composition chimique dans un plasma issu de mélanges de PTFE, d’air, de cuivre et de vapeur d’eau dans le cadre d’appareillages de coupure électrique à air. Journal International de Technologie, de l’Innovation, de la Physique, del’Énergie et de l’Environnement, 2, 1.
[16]
Yaguibou, W.C., Kohio, N., Kagoné, A.K., Koalaga, Z. and Zougmoré, F. (2018) Influence des aérosols sur la composition à l’équilibre d’un plasma d’air. J. Int. Technol. Innov. Phys. Energy Environ. Journal International de Technologie, de l’Innovation, de la Physique, de l’Énergie et de l’Environnement, 4, 1.
[17]
Bruno, K. (2014) Caractérisation optique et microphysique des aérosols atmosphériques en zone ur-baine ouest africaine: application aux calculs du forçage radiatif à Ouagadougou. Ph.D. Thesis, Université de Ouagadougou.
[18]
André, P. (1995) Etude de la composition et des propriétés thermodynamiques des plasmas thermiques à l’équilibre et hors d’équilibre thermodynamique. Ph.D. Thesis, Université Blaise Pascal de Clermont-Ferrand II (France).
[19]
Koalaga, Z. and André, P. (2010) Composition of a Thermal Plasma Formed from PTFE with Copper in Non-Oxidant Atmosphere. High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, 14, 295-303. https://doi.org/10.1615/HighTempMatProc.v14.i3.80
[20]
Kohio, N., Kagone, A.K., Koalaga, Z. and Zougmore (2014) Thermodynamic Properties Calculation of Air-Water Vapor Mixtures Thermal Plasmas at Low Temperatures. International Journal of Advanced Research in Science and Engineering Technology, 1, 240.
[21]
Cayet, S. and Dudeck, M. (1996) Équilibre chimique dans des mélanges gazeux en déséquilibre thermique. Journal de Physique III, 6, 403-420. https://doi.org/10.1051/jp3:1996130
[22]
Bendjebbar, F., André, P., Benbakkar, M., Rochette, D., Flazi, S. and Vacher, D. (2012) Plasma Formed in Argon, Acid Nitric and Water Used in Industrial ICP Torches. Plasma Science and Technology, 14, 683-692. https://doi.org/10.1088/1009-0630/14/8/01
[23]
McBride, B.J., Zeche, M.J. and Gordon, S. (2002) Nasa Glenn Coefficients for Calculating Thermodynamic Properties of Individual Species. Glenn Research Center, 297.
[24]
Berg, A.V.D. (2007) Measurement and Calculation of Thermodynamic Properties of Plasma in the Waste Pyrolysis Reactor. Ph.D. Thesis, Universiteit Gent Vakgroep Toegrpaste.
[25]
Koalaga, Z. (1991) Contribution à l’étude expérimentale et théorique des plasmas d’arc laminés. Ph.D. Thesis, Université de Clermont Ferrand II (France).
[26]
Gordon, S. and Mcbride, B.J. (1994) Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications. NASA Reference Publication 1311, 58.
[27]
Boulos, I.M., Fauchais, P. and Pfender, E. (1994) Thermal Plasmas: The Fundamentals and Applications. Plenum Press, 413-417.
[28]
D’Angola, A., Colonna, G., Gorse, C. and Capitelli, M. (2007) Thermodynamic and Transport Properties in Equilibrium Air Plasmas in a Wide Pressure and Temperature Range. The European Physical Journal D, 46, 129-150. https://doi.org/10.1140/epjd/e2007-00305-4
[29]
Colonna, G., D’Angola, A., Laricchiuta, A., Bruno, D. and Capitelli, M. (2012) Analytical Expressions of Thermodynamic and Transport Properties of the Martian Atmosphere in a Wide Temperature and Pressure Range. Plasma Chemistry and Plasma Processing, 33, 401-431. https://doi.org/10.1007/s11090-012-9418-4
[30]
Capitelli, M., Colonna, G., Gorse, C. and D’Angola, A. (2000) Transport Properties of High Temperature Air in Local Thermodynamic Equilibrium. The European Physical Journal D, 11, 279-289. https://doi.org/10.1007/s100530070094
[31]
Cressault, Y., Hannachi, R., Teulet, P., Gleizes, A., Gonnet, J. and Battandier, J. (2008) Influence of Metallic Vapours on the Properties of Air Thermal Plasmas. Plasma Sources Science and Technology, 17, Article ID: 035016. https://doi.org/10.1088/0963-0252/17/3/035016
[32]
Tanaka, Y., Yokomizu, Y., Kato, M., Matsumura, T., Shimizu, K., Takayama, S. and Okada, T. (1996) Electrical and Thermal Conductivities and Enthalpy of Air Plasma Contaminated with Fe, Ca, Mg or H2O Vapour. Proceedings 4th International Conference on Plasma Processes, Athens, 15-17 July 1996, 587.
[33]
Yokomizu, Y., Ochiai, R. and Matsumura, T. (2009) Electrical and Thermal Conductivities of High-Temperature CO2-CF3I Mixture and Transient Conductance of Residual Arc during Its Extinction Process. Journal of Physics D: Applied Physics, 42, Article ID: 215204. https://doi.org/10.1088/0022-3727/42/21/215204
[34]
Colombo, V., Ghedini, E. and Sanibondi, P. (2008) Thermodynamic and Transport Properties in Non-Equilibrium Argon, Oxygen and Nitrogen Thermal Plasmas. Progress in Nuclear Energy, 50, 921-933. https://doi.org/10.1016/j.pnucene.2008.06.002
[35]
Chervy, B., Gleizes, A. and Razafinimanana, M. (1994) Thermodynamic Properties and Transport Coefficients in SF6-Cu Mixtures at Temperatures of 300-30000 K and Pressures of 0.1-1 Mpa. Journal of Physics D: Applied Physics, 27, 1193-1206. https://doi.org/10.1088/0022-3727/27/6/017
[36]
Deng, J.W., Zhang, B.Y., Cao, M.C., et al. (2024) Radiation Properties of [C4F7N-CO2-O2]-PTFE-Cu Mixtures at High Temperatures and Pressures for High-Voltage Circuit Breakers. Journal of Physics D: Applied Physics, 58, Article ID: 015206. https://doi.org/10.1088/1361-6463/ad809d
[37]
Cressault, Y., Kimpeler, S., Moser, A. and Teulet, P. (2023) Thermophysical Properties of Air-Pa66-Copper Plasmas for Low-Voltage Direct Current Switches. Plasma Physics and Technology, 10, 52-55. https://doi.org/10.14311/ppt.2023.1.52
[38]
Zhong, L., Wang, J., Xu, J., Wang, X. and Rong, M. (2019) Effects of Buffer Gases on Plasma Properties and Arc Decaying Characteristics of C4F7N-N2 and C4F7N-CO2 Arc Plasmas. Plasma Chemistry and Plasma Processing, 39, 1379-1396. https://doi.org/10.1007/s11090-019-10015-8
[39]
Koalaga, Z., Abbaoui, M. and Lefort, A. (1993) Thermodynamic Properties Calculation of CalphaHbetaOgammaNtheta Insulator Plasmas. Journal of Physics D: Applied Physics, 26, 393-403. https://doi.org/10.1088/0022-3727/26/3/008
[40]
Cressault, Y., Connord, V., Hingana, H., Teulet, P. and Gleizes, A. (2011) Transport Properties of CF3I Thermal Plasmas Mixed with CO2, Air or N2 as an Alternative to SF6 Plasmas in High-Voltage Circuit Breakers. Journal of Physics D: Applied Physics, 44, Article ID: 495202. https://doi.org/10.1088/0022-3727/44/49/495202
[41]
André, P., Bussière, W. and Rochette, D. (2007) Transport Coefficients of Ag-SiO2 Plasmas. Plasma Chemistry and Plasma Processing, 27, 381-403. https://doi.org/10.1007/s11090-007-9086-y
[42]
Wang, W., Rong, M., Wu, Y. and Yan, J.D. (2012) Thermodynamic and Transport Properties of Two-Temperature SF6 Plasmas. Physics of Plasmas, 45, Article ID: 083506. https://doi.org/10.1063/1.4739778
[43]
Liu, Y., Wang, X., Zhong, L., Yang, A., Rong, M. and Wu, J. (2018) Influence of Al, Fe or Cu Vapour on Thermophysical Properties of CO2 Plasmas. The European Physical Journal D, 72, Article No. 215. https://doi.org/10.1140/epjd/e2018-80591-3
[44]
Cressault, Y., Murphy, A.B., Teulet, P., Gleizes, A. and Schnick, M. (2013) Thermal Plasma Properties for Ar-Cu, Ar-Fe and Ar-Al Mixtures Used in Welding Plasmas Processes: II. Transport Coefficients at Atmospheric Pressure. Journal of Physics D: Applied Physics, 46, Article ID: 415207. https://doi.org/10.1088/0022-3727/46/41/415207
