全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

Probabilistic Approach to Determining the Tendency to Destroy a Nuclear Reactor Vessel in the Presence of Metal Defects

DOI: 10.4236/jpee.2025.134001, PP. 1-12

Keywords: Reactor, Defects, Probabilistic Approach

Full-Text   Cite this paper   Add to My Lib

Abstract:

The metal of the reactor vessel is subject to aging mechanisms caused by radiation exposure, high temperatures, and thermohydraulic variable loads. After decades of operation under these conditions, defects form in the metal structure. In addition to the well-known deterministic methods of testing and monitoring the metal, new approaches have been increasingly sought in recent years. The presentation in this article has two main goals: 1) To determine whether a probabilistic model is suitable for determining the tendency for breaking the metal of the casing, in the presence of defects; 2) How to use the probabilistic approach to conduct technical diagnostics of the condition of the metal of the case.

References

[1]  IAEA International Atomic Energy Agency (2020) Safety Reports Series No. 82 Ageing Management for Nuclear Power Plants: International Generic Ageing Lessons Learned IGALL.
http://www.iaea.org/publications/13475/ageing-management-for-nuclear-power-plants-international-generic-ageing-lessons-learned-igal /dx.doi.org/10.1080/028418501127346846
[2]  IAEA International Atomic Energy Agency (2011) Procedures for Lifetime Assessment of Components and Piping in VVER, NPP, Verlife.
https://inis.iaea.org/search/search.aspx?orig_q=RN:43130377
[3]  Georgiev, M. (2005) Crack Resistance of Metals under Static Load, Bulvest 2000, Sofia.
https://knizhen-pazar.net/products/books/3859165-puknatoustoychivost-na-metalite-pri-statichno-natovarvane
[4]  IAEA International Atomic Energy Agency (1999) IAEA-TECDOC-1119 Assessment and Management of Ageing of Major Nuclear Power Plant Components Important to Safety: PWR Vessel Internals.
http://www-pub.iaea.org/mtcd/publications/pdf/te_1119_prn.pdf/
[5]  ASME Code, Section III (2023) BPVC Section III-Rules for Construction of Nuclear Facility Components—Subsection NCA—General Requirement for Divisions 1, 2. The American Society of Mechanical Engineering.
https://www.asme.org/codes-standards/find-codes-standards/bpvc-section-iii-subsection-nca-general-requirements-div-1-div-2/2023/print-book
[6]  RCC-M Code and Subsection, G. (2022) Equipment Reactor Internals, Afcen, France.
[7]  PN AE G 7-002-86 (1987) Rules of Equipment and Pipelines Strength Calculation of Nuclear Power Plants USSR, State Committee for Supervision Over Safe Work Practices in the Nuclear Power Industry.
http://docs.secnrs.ru/documents/pnaes/%D0%9F%D0%9D%D0%90%D0%AD_%D0%93-7-002-86/%D0%9F%D0%9D%D0%90%D0%AD-%D0%93-002-86e.htm
[8]  https://pris.iaea.org/pris/home.aspx
[9]  FNP-105-18 (2018) Rules for Inspection of Metal, Equipment and Pipelines of Nuclear Power Plants during Manufacture and Installation.
[10]  Eighth National Report of Republic of Bulgaria on the Fulfilment of the Obligations under the Convention on Nuclear Safety (2019) Nuclear Regulatory Agency, Sofia.
https://www.bnra.bg/media/2021/06/8-.pdf
[11]  BDS EN 10228-3 (2016) Non-Destructive Testing of Steel Forgings—Part 3: Ultrasonic Testing of Ferritic or Martensitic Steel Forgings.
https://bds-bg.org/en/project/show/bds:proj:88457
[12]  BDS EN 10228-4 (2016) Non-Destructive Testing of Steel Forgings—Part 4: Ultrasonic Testing of Austenitic and Austenitic-Ferritic Stainless Steel Forgings.
http://bds-bg.org/en/project/show/bds:proj:88458
[13]  BDS EN ISO 17640 (2019) Non-Destructive Testing of Welded Joints. Ultrasonic Testing. Technologies, Test Level and Evaluation.
[14]  BDS EN ISO 16823 (2014) Non-Destructive Testing of Welded Joints. Ultrasonic Testing. Transmittance Technology.
[15]  GOST R.50.05.02 (2019) Conformity Assessment System in the Field of Atomic Energy use. Conformity Assessment in the Form of Control. Ultrasonic Testing of Welded Joints and Weld Coatings.
[16]  GOST R.50.05.04 (2018) Conformity Assessment System in the Field of Atomic Energy Use. Conformity Assessment in the Form of Control. Ultrasonic Testing of Austenitic Steel Welds.
[17]  Weibull distribution.
http://www.sciencedirect.com/topics/physics-and-astronomy/weibull-distribution

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133