|
|
Applied Physics 2025
基于热力耦合的复合激光除漆数值模拟研究
|
Abstract:
本研究针对航空铝合金表面复合漆层高精度去除需求，建立连续–纳秒复合激光与气流辅助耦合的有限元模型。基于有限元仿真分析法构建包含激光热源、气固耦合传热及热弹性力学的多物理场模型，重点分析不同能量密度下的温度梯度演化规律与热应力分布特征。揭示复合激光除漆的机理，阐明激光参数与热力耦合响应的关联机制，为复合激光除漆工艺优化提供理论依据。
A finite element model of continuous nanosecond composite laser coupled with air flow assisted coupling was established to remove the high layer accuracy of composite coatings for aerospace aluminum alloys. A multi-physics model including laser heat source, gas-solid coupled heat transfer and thermoelasticity was constructed based on finite element simulation analysis. The temperature gradient evolution law and thermal stress distribution characteristics under different energy densities were analyzed. The mechanism of composite laser paint removal was revealed, and the correlation mechanism between laser parameters and thermal coupling response was elucidated, which provided theoretical basis for the optimization of composite laser paint removal process.
| [1] | Liu, J., Wang, J., Mazzola, L., Memon, H., Barman, T., Turnbull, B., et al. (2018) Development and Evaluation of Poly (Dimethylsiloxane) Based Composite Coatings for Icephobic Applications. Surface and Coatings Technology, 349, 980-985. https://doi.org/10.1016/j.surfcoat.2018.06.066 |
| [2] | Chongcharoen, K., Kittiboonanan, P. and Ratanavis, A. (2017) Feasibility Study of a Dual Wavelength Laser Cleaner. Journal of Physics: Conference Series, 901, Article 012105. https://doi.org/10.1088/1742-6596/901/1/012105 |
| [3] | Zou, W., Xie, Y., Xiao, X., Zeng, X. and Luo, Y. (2014) Application of Thermal Stress Model to Paint Removal by Q-Switched Nd: YAG Laser. Chinese Physics B, 23, Article 074205. https://doi.org/10.1088/1674-1056/23/7/074205 |
| [4] | Tsunemi, A., Hagiwara, K., Saito, N., Nagasaka, K., Miyamoto, Y., Suto, O., et al. (1996) Complete Removal of Paint from Metal Surface by Ablation with a TEA CO2 Laser. Applied Physics A: Materials Science & Processing, 63, 435-439. https://doi.org/10.1007/s003390050413 |
| [5] | Li, Y., Li, J., Dong, H., Zhang, W. and Jin, G. (2024) Simulation and Experimental Study on Continuous Wave Fiber Laser Removal of Epoxy Resin Paint Film on the Surface of 6061 Aluminum Alloy. Photonics, 11, Article 82. https://doi.org/10.3390/photonics11010082 |
| [6] | Lu, Y., Yang, L., Wang, Y., Chen, H., Guo, B. and Tian, Z. (2019) Paint Removal on the 5A06 Aluminum Alloy Using a Continuous Wave Fiber Laser. Coatings, 9, Article 488. https://doi.org/10.3390/coatings9080488 |
| [7] | Apostol, I., Damian, V., Garoi, F., Iordache, I., Bojan, M., Apostol, D., et al. (2011) Controlled Removal of Overpainting and Painting Layers under the Action of UV Laser Radiation. Optics and Spectroscopy, 111, 287-292. https://doi.org/10.1134/s0030400x11080054 |
| [8] | Zhao, H., Qiao, Y., Du, X., Wang, S., Zhang, Q., Zang, Y., et al. (2019) Paint Removal with Pulsed Laser: Theory Simulation and Mechanism Analysis. Applied Sciences, 9, Article 5500. https://doi.org/10.3390/app9245500 |
| [9] | Brygo, F., Dutouquet, C., Le Guern, F., Oltra, R., Semerok, A. and Weulersse, J.M. (2006) Laser Fluence, Repetition Rate and Pulse Duration Effects on Paint Ablation. Applied Surface Science, 252, 2131-2138. https://doi.org/10.1016/j.apsusc.2005.02.143 |
| [10] | Cao, H., Xie, X., Chang, H., Li, Y., Yue, J., Yu, Y., et al. (2024) Laser-Induced Damages to Charge Coupled Devices with Combined Nanosecond/picosecond Short-Pulse Lasers. Frontiers in Physics, 12, Article 1345859. https://doi.org/10.3389/fphy.2024.1345859 |
| [11] | Jia, X., Zhang, Y., Chen, Y., Wang, H., Zhu, G. and Zhu, X. (2019) Combined Pulsed Laser Drilling of Metal by Continuous Wave Laser and Nanosecond Pulse Train. The International Journal of Advanced Manufacturing Technology, 104, 1269-1274. https://doi.org/10.1007/s00170-019-04139-6 |
| [12] | Zhao, W., Ma, T., Song, H., Yuan, W., Wang, R., Wang, Z., et al. (2021) Effects of Tangential Supersonic Airflow on the Laser Ablation of Laminated CFRP. Journal of Materials Research and Technology, 14, 1985-1997. https://doi.org/10.1016/j.jmrt.2021.07.101 |
