|
吉林永吉变电站二次设备舱的环境适应性研究
|
Abstract:
变电站二次设备舱是电力系统中的关键组成部分,负责安装和管理各类控制、保护、监测及通信设备。这就意味着二次设备舱需要有很强的适应性,以满足当地的环境要求。由于台风影响,吉林永吉变电站二次设备舱存在防水问题。因此,对其进行了改进。在原有结构的基础上,在内外层板中加入聚氨酯保温板,提高预制舱的吸水性。并对改进后的二次设备舱进行了环境适应性研究。主要对二次设备舱在极限温度下的工况进行了分析,使其具有实用性。
The secondary equipment compartment of a substation is a key component of the power system, responsible for installing and managing various control, protection, monitoring, and communication equipment. This means that the secondary equipment compartment needs to have strong adaptability to meet local environmental requirements. Due to the impact of the typhoon, there are waterproofing issues in the secondary equipment compartment of Jilin Yongji Substation. Therefore, it has been improved. On the basis of the original structure, polyurethane insulation boards are added to the inner and outer layers to improve the water absorption of the prefabricated cabin. And environmental adaptability research was conducted on the improved secondary equipment cabin. The analysis mainly focuses on the working conditions of the secondary equipment compartment under extreme temperature, making it practical.
[1] | 常惜阳. 智能变电站发展现状与趋势的研究[J]. 电力自动化, 2019(20): 63-65. |
[2] | 胡劲松, 石改萍, 孔祥玉, 等. 新技术对模块化智能变电站设计的影响分析和建议[J]. 电力系统及其自动化学报, 2020, 32(3): 107-112. |
[3] | 李晓娜. 探究提高配网线路电压质量及供电可靠性[J]. 江西建材, 2017(16): 197+199. |
[4] | 叶健, 孙福鹏. 模块化变电站在南方电网的应用可行性分析[J]. 广西电力, 2018, 41(5): 48-51. |
[5] | 姜百超. 新一代智能变电站关键技术及评价指标研究[D]: [硕士学位论文]. 保定: 华北电力大学, 2018. |
[6] | 王贺. 哈尔滨呼兰66千伏智能变电站低温模块化设计[D]: [硕士学位论文]. 长春: 吉林大学, 2018. |
[7] | 陈莉. 智能变电站二次设备模块化设计技术[J]. 辽宁工程技术研究, 2017(1): 239+244. |
[8] | 张中冠. 智能变电站二次设备模块化建设方案研究[J]. 电工技术, 2017(11): 23-24. |
[9] | 金祝飞, 袁敏. 模块化变电站预制舱二次接口标准化方案设计[J]. 电气传动自动化, 2018, 40(3): 10-13+19. |
[10] | 张浩, 田国军. 智能变电站预制舱辅助设备配置方案研究[J]. 现代工业经济和信息化, 2019(16): 42-44. |
[11] | 王雷涛, 齐小赞, 周挥毫. 新一代智能变电站预制舱照明设计[J]. 电气应用, 2014(20): 126-129. |
[12] | Nagarsheth, R. and Singh, S. (2014) Study of Gas Insulated Substation and Its Comparison with Air Insulated Substation. International Journal of Electrical Power & Energy Systems, 55, 481-485. https://doi.org/10.1016/j.ijepes.2013.09.012 |
[13] | Mohammadi, R.K., Akrami, V. and Nikfar, F. (2013) An Improvement to Seismic Design of Substation Support Structures. Structural Engineering and Mechanics, 45, 821-835. https://doi.org/10.12989/sem.2013.45.6.821 |
[14] | 谢瑞, 周兴扬, 杨卫星. 预制式二次组合设备模块方案应用[J]. 电网与清洁能源, 2016, 32(12): 47-50+56. |
[15] | 聂建春, 张振, 王安, 等. 智能变电站预制舱在内蒙古地区的环境适应性分析[J]. 内蒙古电力技术, 2018, 36(2): 6-10+15. |
[16] | 中华人民共和国住房和城乡建设部, 中华人民共和国国家质量监督检验检疫总局. 建筑结构载荷规范: GB50009-2012 [S]. 北京: 中国建筑工业出版社, 2012. |
[17] | 中华人民共和国住房和城乡建设部, 中华人民共和国国家质量监督检验检疫总局. 电力设施抗震设计规范: GB50260-2013 [S]. 北京: 中国计划出版社, 2013. |
[18] | 祝德春, 吴明, 韩德斌. 高寒地区智能变电站预制舱热环境数值模拟[J]. 机电工程, 2017, 34(2): 200-204. |