Upon ship lift chamber docking with approach channel in the case of water level difference, water in chamber will fluctuate evidently. The maximum or minimum fluctuation of water surface is an important parameter to measure operational safety of ship lift. A simplified 3D mathematical model of ship lift chamber upon tumble gate opening was built based on standard k-ε model, FVM (Finite Volume Method) and VOF (Volume of Fluid) model. Based on π theorem, the dimensionless influencing factors of Δhmax/d and Δhmin/d were B/L, d/B and Δh/d. On this basis, 30 sets of working conditions were designed to respectively study the relationships between the maximum wave height and each influencing factor. Through regression analysis, the empirical formulas of Δhmax/d and Δhmin/d were obtained. Furthermore, taking into account the potential influence of the gate opening time on the wave height in practical applications, the relationship between the gate opening time and the error was fitted, and the modified empirical formulas of
and
were derived, which had a wider scope of application. The results have practical value for engineering design and security operation of ship lift.
References
[1]
Hu, Y.A., Li, Z.H., Li, Y. and Xuan, G.X. (2016) Research Developments in the Field of Major Ship Lift in China. Port & Waterway Engineering, 12, 10-19.
[2]
Tu, J., Qu, W. and Chen, J. (2008) An Experimental Study on Semi-Active Seismic Response Control of a Large-Span Building on Top of Ship Lift Towers. Journal of Vibration and Control, 14, 1055-1074. https://doi.org/10.1177/1077546307087396
[3]
Wang, X., Hu, Y.A., Li, Z.H., et al. (2019) Prototype Monitoring of Mechanical Characteristics of Large Ship Lift Chamber Filling and Outleting of Water. Hydro-Science and Engineering, 3, 1-8.
[4]
Hu, Y.A., Li, Z.H. and Lai, D.L. (2016) Influence of Different Tumble Gate Operation of Ship Lift Chamber on Vessels Mooring Force. Port & Waterway Engineering, 12, 148-152.
[5]
Li, K., Mannan, M.A., Xu, M. and Xiao, Z. (2001) Electro-Hydraulic Proportional Control of Twin-Cylinder Hydraulic Elevators. Control Engineering Practice, 9, 367-373. https://doi.org/10.1016/s0967-0661(01)00003-x
[6]
Gu, Z.H. (2000) Experimental Study on Hydrodynamic of Ship Lift Chamber. Master’s Thesis, Nanjing Hydraulic Research Institute.
[7]
Wang, X. and, Sun, Z.F. (2020) Influencing Factors of Ship Draught Control Standard Based on Prototype Test of Ship Lift. Journal of Waterway and Harbor, 41, 578-584.
[8]
Fang, M. and Chen, T. (2008) A Parametric Study of Wave Loads on Trimaran Ships Traveling in Waves. Ocean Engineering, 35, 749-762. https://doi.org/10.1016/j.oceaneng.2008.02.001
[9]
Gu, Z.H., Bao, G.J., Xuan, G.X. and Chen, J.Z. (2002) Experimental Study on Hydrodynamic Characteristics of Ship Lift Chambers. Hydro Science and Engineering, 3, 7-13.
[10]
Gu, Z.H., Tang, H.W. and Li, Y. (2002) Computing Models of Maximum Longitudinal Hawser Force of Ship in Ship Lift Chamber. Port & Waterway Engineering, 1, 10-13.
[11]
Gu, Z.H., Tang, H.W. and Li, Y. (2003) Neural Network Models of Maximum Fluctuation of Water Surface in Ship Lift Chamber with Tumble Gate Operating. Journal of Yangtze River Scientific Research Institute, 20, 10-12.
[12]
Bao, G.J. and Chen, J.Z. (1998) Probe into Hydrodynamics Problems of Hoisting Vertical Ship Lift. Hydro-Science and Engineering, 4, 397-403.
[13]
Yang, Z. (2015) Research of The Hydrodynamic Numerical Simulation Based on Ship Come in and out of the Vertical Ship Lift Chamber. Master’s Thesis, Chongqing Jiaotong University.
[14]
Lynch, D.R. and Gray, W.G. (1980) Finite Element Simulation of Flow in Deforming Regions. Journal of Computational Physics, 36, 135-153. https://doi.org/10.1016/0021-9991(80)90180-1
[15]
Johns, B., Dube, S.K., Sinha, P.C., Mohanty, U.C. and Rao, A.D. (1982) The Simulation of a Continuously Deforming Lateral Boundary in Problems Involving the Shallow Water Equations. Computers & Fluids, 10, 105-116. https://doi.org/10.1016/0045-7930(82)90002-0
[16]
Primo, A.R.M., Wrobel, L.C. and Power, H. (2000) Boundary Integral Formulation for Slow Viscous Flow in a Deforming Region Containing a Solid Inclusion. Engineering Analysis with Boundary Elements, 24, 53-63. https://doi.org/10.1016/s0955-7997(99)00038-7
[17]
Akyildiz, H. and Ünal, E. (2005) Experimental Investigation of Pressure Distribution on a Rectangular Tank Due to the Liquid Sloshing. Ocean Engineering, 32, 1503-1516. https://doi.org/10.1016/j.oceaneng.2004.11.006
[18]
Akyildız, H. and Erdem Ünal, N. (2006) Sloshing in a Three-Dimensional Rectangular Tank: Numerical Simulation and Experimental Validation. Ocean Engineering, 33, 2135-2149. https://doi.org/10.1016/j.oceaneng.2005.11.001
[19]
Panigrahy, P.K., Saha, U.K. and Maity, D. (2009) Experimental Studies on Sloshing Behavior Due to Horizontal Movement of Liquids in Baffled Tanks. Ocean Engineering, 36, 213-222. https://doi.org/10.1016/j.oceaneng.2008.11.002
[20]
Yeoh, S.L., Papadakis, G. and Yianneskis, M. (2004) Numerical Simulation of Turbulent Flow Characteristics in a Stirred Vessel Using the LES and RANS Approaches with the Sliding/Deforming Mesh Methodology. Chemical Engineering Research and Design, 82, 834-848. https://doi.org/10.1205/0263876041596751
[21]
Dube, S.K., Sinha, P.C. and Roy, G.D. (1986) The Effect of a Continuously Deforming Coastline on the Numerical Simulation of Storm Surges in Bangladesh. Mathematics and Computers in Simulation, 28, 41-56. https://doi.org/10.1016/0378-4754(86)90086-8