|
|
基于PFC3D花岗岩地层破岩效率影响规律研究
|
Abstract:
本文通过PFC3D离散元软件建立了三维双滚刀破岩模型，根据室内试验结果验证模型的准确性，并对不同围压、刀间距、贯入度和温度条件下花岗岩地层破岩效率开展了研究。结果表明，相同温度条件下，围压和刀间距对破岩效率有着抑制作用；随着贯入深度增加，刀具与岩石接触更加充分，同时岩层温度上升，破岩效率会逐渐提升。
This study established a three-dimensional dual-disc cutter rock-breaking model using PFC3D discrete element software, validated the model’s accuracy based on laboratory test results, and investigated the rock-breaking efficiency of granite formations under different confining pressures, cutter spacing, penetration depths, and temperature conditions. The results indicate that under the same temperature conditions, confining pressure and cutter spacing have a suppressive effect on rock-breaking efficiency; as penetration depth increases, the contact between the cutter and the rock becomes more sufficient, and with the rise in rock layer temperature, the rock-breaking efficiency gradually increases.
| [1] | 陈贝贝, 钟发胜, 吕专真, 等. 贯入度与刀间距对TBM滚刀破岩推力的影响[J]. 建筑机械化, 2020, 41(3): 52-55. |
| [2] | 刘颖超, 刘波, 江玉生, 等. TBM滚刀破岩效果及新型刀具的应用研究[J]. 矿业科学学报, 2023, 8(3): 357-369. |
| [3] | 冀国栋, 付柏毅, 章慧健, 等. TBM滚刀贯入度对破岩效能的影响规律研究[J]. 铁道科学与工程学报, 2023, 20(12): 4755-4768. |
| [4] | Zhang, X., Lin, L., Xia, Y., Tan, Q., Zhu, Z., Mao, Q., et al. (2018) Experimental Study on Wear of TBM Disc Cutter Rings with Different Kinds of Hardness. Tunnelling and Underground Space Technology, 82, 346-357. https://doi.org/10.1016/j.tust.2018.08.050 |
| [5] | Ning, B., Xia, Y., Lin, L., Zhang, X., He, Y. and Liu, Y. (2020) Experimental Study on the Adaptability of Cutters with Different Blade Widths under Hard Rock and Extremely Hard Rock Conditions. Acta Geotechnica, 15, 3283-3294. https://doi.org/10.1007/s11440-020-00958-0 |
| [6] | Cho, J., Jeon, S., Yu, S. and Chang, S. (2010) Optimum Spacing of TBM Disc Cutters: A Numerical Simulation Using the Three-Dimensional Dynamic Fracturing Method. Tunnelling and Underground Space Technology, 25, 230-244. https://doi.org/10.1016/j.tust.2009.11.007 |
| [7] | 张照煌, 兰越, 韩佳霖, 等. 盘形滚刀三维刀间距数值模拟与分析[J]. 矿山机械, 2024, 52(6): 9-16. |
| [8] | Cheng, J., Jiang, H., Qu, X., Jiang, Y. and Li, C. (2021) Numerical Simulation Study on Rock Breaking Efficiency of Shield Cutters in Large-Size Boulder Strata. IOP Conference Series: Earth and Environmental Science, 719, Article 042067. https://doi.org/10.1088/1755-1315/719/4/042067 |
| [9] | 王华伟, 康正阳, 王英才, 等. 极硬岩条件下盾构滚刀掘进过程数值模拟[J]. 油气储运, 2024, 43(7): 819-826+832. |
| [10] | 孙超, 凌静秀, 王乾廷, 等. 基于离散元法的TBM边滚刀破岩载荷特性研究[J]. 机电技术, 2024(1): 85-88+105. |
| [11] | 乔世范, 刘钰, 王刚, 等. 考虑岩石细观结构的TBM滚刀破岩过程数值研究[J]. 中国安全生产科学技术, 2023, 19(7): 106-112. |
| [12] | 温森, 吴斐, 李胜, 等. 不同侧压系数和岩石强度下TBM滚刀破岩效率的数值模拟[J]. 隧道与地下工程灾害防治, 2021, 3(4): 9-19. |
| [13] | Duan, W., Zhang, L., Zhang, M., Su, Y., Mo, J. and Zhou, Z. (2021) Numerical and Experimental Studies on the Effects of the TBM Cutter Profile on Rock Cutting. KSCE Journal of Civil Engineering, 26, 416-432. https://doi.org/10.1007/s12205-021-2111-5 |
| [14] | Bahaaddini, M., Sheikhpourkhani, A.M. and Mansouri, H. (2019) Flat-Joint Model to Reproduce the Mechanical Behaviour of Intact Rocks. European Journal of Environmental and Civil Engineering, 25, 1427-1448. https://doi.org/10.1080/19648189.2019.1579759 |
| [15] | Duan, W., Zhang, L., Zhang, M., Su, Y., Mo, J. and Zhou, Z. (2021) Numerical and Experimental Studies on the Effects of the TBM Cutter Profile on Rock Cutting. KSCE Journal of Civil Engineering, 26, 416-432. https://doi.org/10.1007/s12205-021-2111-5 |
