|
高铋铅阳极泥浸出工艺研究
|
Abstract:
本文研究了高铋铅阳极泥的浸出工艺;考察了浸出剂、浸出时间、浸出温度、液固体积质量比、浸出剂浓度、双氧水加入量对锑、铋浸出率的影响。结果表明:在液固比3:1,盐酸浓度为6 mol/L,反应温度30℃~50℃,双氧水加入量为375 kg/吨铅阳极泥的条件下,锑、铋浸出率均达95%以上,金、银几乎不浸出。
In this paper, the leaching process of high bismuth lead anode slime was studied. The effects of extractant, leaching time, leaching temperature, volume-to-mass ratio of liquid to solid, concentration of leaching agent and amount of hydrogen peroxide on the leaching rate of antimony and bismuth were investigated. The results show that under the conditions of liquid-solid ratio of 3:1, concentration of hydrochloric acid of 6 mol/L, reaction temperature of 30?C~50?C, addition of hydrogen peroxide of 375 kg/ton of high bismuth lead anode slime, the leaching rate of antimony and bismuth is more than 95%, and gold and silver are hardly leached.
[1] | 黄宗耀. 铅阳极泥湿法处理工艺实践[J]. 上海有色金属, 2014(3): 115-118+127. |
[2] | 黄海飞, 陈兰, 黄健斌. 铅阳极泥综合回收技术升级改造生产实践[J]. 中国有色冶金, 2021(1): 41-46+69. |
[3] | 株洲冶炼集团股份有限公司. 一种洗涤铅阳极泥并回收铅阳极泥中铅的方法[P]. CN106916954A. 2017-01-20. |
[4] | 何云龙, 徐瑞东, 何世伟, 等. 铅阳极泥处理技术的研究进展[J]. 有色金属科学与进展, 2017, 8(5): 40-51. |
[5] | 沈庆峰. 低压催化氧化处理铅阳极泥工艺研究[D]: [硕士学位论文]. 昆明: 昆明理工大学, 2003. |
[6] | 林宏义. 铅阳极泥湿法处理新工艺研究[D]: [硕士学位论文]. 长沙: 中南大学, 2004. |
[7] | 魏洪洁. 铅阳极泥中锑铋分离提取的研究[D]: [硕士学位论文]. 沈阳: 东北大学, 2009. |
[8] | 何云龙. 高铋铅阳极泥中有价金属分离与富集的应用基础研究[D]: [博士学位论文]. 昆明: 昆明理工大学, 2018. |
[9] | 阮书锋, 尹飞, 王成彦, 王军, 王振文. H2SO4 + NaC选择性浸出铅阳极泥的研究[J]. 矿业, 2012, 21(3): 30-32. |
[10] | 吴文华, 刘吉波, 王志坚, 等. 铅阳极泥有价金属的分离研究[J]. 有色金属(冶炼部分), 2013(7): 47-50. |