This research paper presents a numerical study on the flow characteristics and performance of a baffled shock two-dimensional vector nozzle. The baffled shock vector nozzle is a type of fluid thrust vectoring nozzle that uses a secondary injection to deflect the primary flow and generate a vector angle. The fluid thrust vectoring technology is regarded as a key technology for the development of very low detectable vehicles because of its advantages, such as fast response, lightweight, and good stealth performance. The main objectives of this study are to investigate the effects of various parameters such as slot interval distance, slot width, injection angle, nozzle pressure ratio, secondary flow pressure ratio, and outflow Mach number on the deflection angle, thrust coefficient, thrust efficiency, and secondary flow ratio of the nozzle. The numerical simulations are carried out using the k-epsilon turbulence model, which is validated by comparing it with experimental data. The results indicate that optimizing the slot interval distance and width, increasing the injection angle, adjusting the nozzle pressure ratio and secondary flow pressure ratio, and controlling the outflow Mach number can enhance the nozzle performance. The results also reveal the complex flow phenomena inside the nozzle, such as shock wave interactions, flow separation and reattachment, and boundary layer effects. The study provides a comprehensive understanding of the flow characteristics and performance of a baffled shock two-dimensional vector nozzle and offers some guidance for its design and optimization.
References
[1]
Bertin, J.J. and Cummings, R.M. (2006) Critical Hypersonic Aerothermodynamic Phenomena. Annual Review of Fluid Mechanics, 38, 129-157. https://doi.org/10.1146/annurev.fluid.38.050304.092041
[2]
Wu, J. (2017) Extention of Hypersonic Ludwieg Tube to Supersonic Wind Tunnel. Acta Aerodynamica Sinica, 36, 480-492.
[3]
Taylor, A.A. and Hoffman, J.D. (1974) Design of Maximum Thrust Nozzles for Nonequilibrium Chemically Reacting Flow. AIAA Journal, 12, 1299-1300. https://doi.org/10.2514/3.49481
[4]
Wang, S.X. (2018) Structural Characteristics and Development of Geometrically Adjustable Nozzles. Journal of Sichuan Ordnance, 39, 6-13.
[5]
Waithe, K. and Deere, K. (2003) An Experimental and Computational Investigation of Multiple Injection Ports in a Convergent-Divergent Nozzle for Fluidic Thrust Vectoring. 21st AIAA Applied Aerodynamics Conference, Orlando, 23-26 June 2003, Article No. 1. https://doi.org/10.2514/6.2003-3802
[6]
Sun, D.C. and You, X. (2016) Numerical Study of Engine Thrust Vectoring Scheme. Journal of Propulsion Technology, 37, 436-442.
[7]
Xiao, Z.Y., Jiang, X., Mou, B., et al. (2017) A Review of Research on Fluid Thrust Vectoring Technology. Experimental Fluid Mechanics, 31, 8-15.
[8]
Bianchi, D. and Neri, A. (2015) Numerical Simulation of Chemical Erosion in VEGA Launcher Solid Propellant Rocket Motor Nozzles. Journal of Propulsion and Power, 34, 1-17.
[9]
Yang, F., Li, Z.H. and Li, J.C. (2020) Research Progress of Solid Rocket Engine Nozzle Profile. Vacuum, 57, 45-52.
[10]
Liu, W.Z., Zhang, N.R., Zhang, C.L. and Zhao, Y.Z. (2006) Design and Numerical Calculation of Nozzle Profile of a Certain Type of Solid Rocket Engine. Chinese Journal of Engineering Design, 13, 99-103.
[11]
Freepik (2022) Nozzle Vectors & Illustrations for Free Download. https://www.freepik.com/vectors/nozzle
[12]
Meng, Q.M. and Li, Q.S. (1994) Overview of Thrust Vector Nozzle and Its Control Technology. Academic Symposium on Engine Automatic Control of Chinese Society of Aeronautics and Astronautics, Maryland, 29 June-1 July 1994.
[13]
Wang, Y.X. (2006) Jet Engine Axisymmetric Thrust Vector Nozzle. National Defense Industry Press.
[14]
Wood, J.M., Hauer, T.A. and Lippmeier, W.C. (1996) Axisymmetric Vectoring Exhaust Nozzle Thermal Shield: CA, CA2065677 A1.
[15]
Kim, H., Raghunathan, S., Setoguchi, T. and Matsuo, S. (2000) Experimental and Numerical Studies of Supersonic Coanda Wall Jets. 38th Aerospace Sciences Meeting and Exhibit, Saga, 10-13 January 2000. https://doi.org/10.2514/6.2000-814
[16]
Adrian, R.J. and Westerweel, J. (2004) Converging Diverging Nozzle. Virginia Tech.
[17]
Brennen, E. (2005) Oblique Shock Wave. California Institute of Technology.
[18]
Arens, M. (1963) The Shock Position in Overexpanded Nozzles. The Journal of the Royal Aeronautical Society, 67, 268-269. https://doi.org/10.1017/s0368393100078445
[19]
Regenie, V., Gatlin, D., Kempel, R., et al. (1992) The F-18 High Alpha Research Vehicle. NASA TM-104253.
[20]
Young, J. (2013) X31 VECTOR Program Summary. https://www.semanticscholar.org/paper/X31-VECTOR-Program-Summary-Young/d0cc01e5ac9ac0dab81858fdfd4aa9d0b63b3c0b
[21]
Ross, H. and Robinson, M. (2006) X-31: An Example of 20 Years of Successful International Cooperation.
[22]
Hollstein, H.J. (1965) Jet Tab Thrust Vector Control. Journal of Spacecraft and Rockets, 2, 927-930. https://doi.org/10.2514/3.28316
[23]
Eatough, R. (1971) Jet Tab Thrust Vector Control System Demonstration. 7th Propulsion Joint Specialist Conference, Salt Lake City, 14-18 June 1971. https://doi.org/10.2514/6.1971-752
[24]
Eatough, R.G. (1996) Improved Jet Tab Thrust Vector Control for the RGM-345C Booster AD 9-13.
[25]
Thanigaiarasu, S., Jayaprakash, S., Elangovan, S. and Rathakrishnan, E. (2008) Influence of Tab Geometry and Its Orientation on Under-Expanded Sonic Jets. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 222, 331-339. https://doi.org/10.1243/09544100jaero299
[26]
Reddy, D., Zaman, K., Steffen, Jr., C., Steffen, Jr., C., Reddy, D. and Zaman, K. (1997) Numerical Modeling of Jet Entrainment for Nozzles Fitted with Delta Tabs. 35th Aerospace Sciences Meeting and Exhibit, Reno, 6-9 January 1997. https://doi.org/10.2514/6.1997-709
[27]
Zwerneman, W. and Eller, B. (1994). VISTA/F-16 Multi-Axis Thrust Vectoring (MATV) Control Law Design and Evaluation. 19th Atmospheric Flight Mechanics Conference, Scottsdale, 1-3 August 1994, 65. https://doi.org/10.2514/6.1994-3513
[28]
Orme, J., Hathaway, R. and Ferguson, M. (1998) Initial Flight Test Evaluation of the F-15 Active Axisymmetric Vectoring Nozzle Performance. 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Cleveland, 13-15 July 1998. https://doi.org/10.2514/6.1998-3871
[29]
Masum, H., Srree, A.T., Kuldeep, S., et al. (2023) Design Conceptualization and Computational Analysis of Cryogenic Engine Nozzle 10.37591/JOMM.
[30]
Hossain, M. and Hyder, S. (2024) Improve the Aerodynamics Performance of the Wing Using Shark Denticles. International Journal of Recent Engineering Science, 11, 37-43. https://doi.org/10.14445/23497157/ijres-v11i1p106
