The application of carbon nanomaterials, particularly graphene and carbon nanotubes, in cement-based composites is highly significant. These materials demonstrate the multifunctionality of carbon and offer extensive possibilities for technological advancements. This research analyzes how the integration of graphene into cement-based composites enhances damping and mechanical properties, thereby contributing to the safety and durability of structures. Research on carbon nanomaterials is ongoing and is expected to continue driving innovation across various industrial sectors, promoting the sustainable development of building materials.
References
[1]
Chung, D.D.L. (2003) Structural Composite Materials Tailored for Damping. Journal of Alloys and Compounds, 355, 216-223. https://doi.org/10.1016/s0925-8388(03)00233-0
[2]
Tkaczewska, E. (2013) Mechanical Properties of Cement Mortar Containing Fine-Grained Fraction of Fly Ashes. Open Journal of Civil Engineering, 3, 54-68. https://doi.org/10.4236/ojce.2013.32a007
[3]
D’Alessandro, A., Materazzi, A.L. and Ubertini, F. (2020) Nanotechnology in Cement-Based Construction. CRC Press.
[4]
Bowland, A.G. (2011) Comparison and Analysis of the Strength, Stiffness, and Damping Characteristics of Concrete with Rubber, Latex, and Carbonate Additives. Virginia Polytechnic Institute and State University.
[5]
Nadal Gisbert, A., Gadea Borrell, J.M., Parres García, F., Juliá Sanchis, E., Crespo Amorós, J.E., Segura Alcaraz, J., et al. (2014) Analysis Behaviour of Static and Dynamic Properties of Ethylene-Propylene-Diene-Methylene Crumb Rubber Mortar. Construction and Building Materials, 50, 671-682. https://doi.org/10.1016/j.conbuildmat.2013.10.018
[6]
Xue, J. and Shinozuka, M. (2013) Rubberized Concrete: A Green Structural Material with Enhanced Energy-Dissipation Capability. Construction and Building Materials, 42, 196-204. https://doi.org/10.1016/j.conbuildmat.2013.01.005
[7]
Najim, K.B. and Hall, M.R. (2012) Mechanical and Dynamic Properties of Self-Compacting Crumb Rubber Modified Concrete. Construction and Building Materials, 27, 521-530. https://doi.org/10.1016/j.conbuildmat.2011.07.013
[8]
Hernández-Olivares, F., Barluenga, G., Bollati, M. and Witoszek, B. (2002) Static and Dynamic Behaviour of Recycled Tyre Rubber-Filled Concrete. Cement and Concrete Research, 32, 1587-1596. https://doi.org/10.1016/s0008-8846(02)00833-5
[9]
Zheng, L., Sharon Huo, X. and Yuan, Y. (2008) Experimental Investigation on Dynamic Properties of Rubberized Concrete. Construction and Building Materials, 22, 939-947. https://doi.org/10.1016/j.conbuildmat.2007.03.005
[10]
Yan, L., Jenkins, C.H. and Pendleton, R.L. (2000) Polyolefin Fiber-Reinforced Concrete Composites: Part I. Damping and Frequency Characteristics. Cement and Concrete Research, 30, 391-401. https://doi.org/10.1016/s0008-8846(99)00267-7
[11]
Giner, V.T., Baeza, F.J., Ivorra, S., Zornoza, E. and Galao, Ó. (2012) Effect of Steel and Carbon Fiber Additions on the Dynamic Properties of Concrete Containing Silica Fume. Materials & Design, 34, 332-339. https://doi.org/10.1016/j.matdes.2011.07.068
[12]
Shen, C.H., Qian, J., Chen, X.F., et al. (2020) Influence of Fiber Content on the Mechanical Parameters of PVA Fiber Concrete and Calculation Method for Compression Toughness Index. Bulletin of the Chinese Ceramic Society, 39, 3152-3160.
[13]
Tabatabaei, M., Dahi Taleghani, A. and Alem, N. (2020) Nanoengineering of Cement Using Graphite Platelets to Refine Inherent Microstructural Defects. Composites Part B: Engineering, 202, Article ID: 108277. https://doi.org/10.1016/j.compositesb.2020.108277
[14]
Lv, S., Ma, Y., Qiu, C., Sun, T., Liu, J. and Zhou, Q. (2013) Effect of Graphene Oxide Nanosheets of Microstructure and Mechanical Properties of Cement Composites. Construction and Building Materials, 49, 121-127. https://doi.org/10.1016/j.conbuildmat.2013.08.022
[15]
Abedi, M., Fangueiro, R., Camões, A. and Gomes Correia, A. (2020) Evaluation of CNT/GNP’s Synergic Effects on the Mechanical, Microstructural, and Durability Properties of a Cementitious Composite by the Novel Dispersion Method. Construction and Building Materials, 260, Article ID: 120486. https://doi.org/10.1016/j.conbuildmat.2020.120486
[16]
Hollkamp, J.J. and Gordon, R.W. (1995) Experimental Comparison of Piezoelectric and Constrained-Layer Damping. SPIE Proceedings, 2445, 123-133. https://doi.org/10.1117/12.208882
[17]
Donaire-Ávila, J., Mollaioli, F., Lucchini, A. and Benavent-Climent, A. (2015) Intensity Measures for the Seismic Response Prediction of Mid-Rise Buildings with Hysteretic Dampers. Engineering Structures, 102, 278-295. https://doi.org/10.1016/j.engstruct.2015.08.023
[18]
Lee, J. and Kim, J. (2017) Development of Box-Shaped Steel Slit Dampers for Seismic Retrofit of Building Structures. Engineering Structures, 150, 934-946. https://doi.org/10.1016/j.engstruct.2017.07.082
[19]
Fu, X. and Chung, D.D.L. (1996) Vibration Damping Admixtures for Cement. Cement and Concrete Research, 26, 69-75. https://doi.org/10.1016/0008-8846(95)00177-8
[20]
Novoselov, K.S., Geim, A.K., Morozov, S.V., Jiang, D., Zhang, Y., Dubonos, S.V., et al. (2004) Electric Field Effect in Atomically Thin Carbon Films. Science, 306, 666-669. https://doi.org/10.1126/science.1102896
[21]
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J.W., Potts, J.R., et al. (2010) Graphene and Graphene Oxide: Synthesis, Properties, and Applications. Advanced Materials, 22, 3906-3924. https://doi.org/10.1002/adma.201001068
[22]
Stoller, M.D., Park, S., Zhu, Y., An, J. and Ruoff, R.S. (2008) Graphene-Based Ultracapacitors. Nano Letters, 8, 3498-3502. https://doi.org/10.1021/nl802558y
[23]
Lee, C., Wei, X., Kysar, J.W. and Hone, J. (2008) Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene. Science, 321, 385-388. https://doi.org/10.1126/science.1157996
[24]
Ohama, Y. (1995) Handbook of Polymer-Modified Concrete and Mortars: Properties and Process Technology. William Andrew.
[25]
Wang, B. and Jian, B. (2021) Effect of Composite Modification with Recycled Polypropylene Fiber and Styrene-Butadiene Latex on the Properties of Concrete. New Building Materials, 48, 81-84.
[26]
Srivastava, S.K. and Mishra, Y.K. (2018) Nanocarbon Reinforced Rubber Nanocomposites: Detailed Insights about Mechanical, Dynamical Mechanical Properties, Payne, and Mullin Effects. Nanomaterials, 8, Article 945. https://doi.org/10.3390/nano8110945
[27]
Esmaeili, J., Andalibi, K. and Gencel, O. (2021) Mechanical Characteristics of Experimental Multi-Scale Steel Fiber Reinforced Polymer Concrete and Optimization by Taguchi Methods. Construction and Building Materials, 313, Article ID: 125500. https://doi.org/10.1016/j.conbuildmat.2021.125500
[28]
Cavazos, J.S., González, G., Kharissova, O.V., Ortega, B., Peña, L., Osorio, M., et al. (2017) Effect of Nanoparticles on Mechanical Properties of Cement-Sand Mortar Applications. Advances in Chemical Engineering and Science, 7, 270-276. https://doi.org/10.4236/aces.2017.73020
[29]
Yu, P., Wang, Z., Lu, S. and Lai, P. (2019) Effects of Carbon Nanofibers and Carboxyl Functionalized Multi-Walled Carbon Nanotubes on Mechanical Damping Behavior of Cement Paste. Journal of Nanoscience and Nanotechnology, 19, 163-169. https://doi.org/10.1166/jnn.2019.16465
[30]
Zhang, D., Lu, F.L. and Liang, Y.J. (2020) Influence and Mechanism Analysis of Carbon Nanotubes on the Dynamic Mechanical Properties of Cement under Impact Load. Concrete, No. 6, 19-24.
[31]
Li, W., Ji, W., Liu, Y., Xing, F. and Liu, Y. (2015) Damping Property of a Cement‐based Material Containing Carbon Nanotube. Journal of Nanomaterials, 2015, Article ID: 371404. https://doi.org/10.1155/2015/371404
[32]
Xu, S., Liu, J. and Li, Q. (2015) Mechanical Properties and Microstructure of Multi-Walled Carbon Nanotube-Reinforced Cement Paste. Construction and Building Materials, 76, 16-23. https://doi.org/10.1016/j.conbuildmat.2014.11.049
