In the current context of environmental challenges, this study focuses on developing innovative and eco-friendly composites using rice husk and recycled expanded polystyrene. This dual-responsibility approach valorizes a by-product like rice husk, often considered waste, and reuses polystyrene, a plastic waste, thereby contributing to CO2 emission reduction and effective waste management. The manufacturing process involves dissolving recycled polystyrene into a solvent to create a binder, which is then mixed with rice husk and cold-compacted into composite materials. The study examines the impact of two particle sizes (fine and coarse) and different proportions of recycled polystyrene binder. The results show significant variations in the mechanical characteristics of the composites, with Modulus of Rupture (MOR) values varying from 2.41 to 3.47 MPa, Modulus of Elasticity (MOE) ranging from 223.41 to 1497.2 MPa, and Stiffness Coefficient (K) from 5.04 to 33.96 N/mm. These characteristics demonstrate that these composites are appropriate for various construction applications, including interior decoration, panel claddings, and potentially for furniture and door manufacturing when combined with appropriate coatings. This study not only highlights the recycling of agricultural and plastic waste but also provides a localized approach to addressing global climate change challenges through the adoption of sustainable building materials.
References
[1]
FAO (2022) Rice Production, Utilization and Stocks. https://www.fao.org
[2]
Chabannes, M., Bénézet, J., Clerc, L. and Garcia-Diaz, E. (2014) Use of Raw Rice Husk as Natural Aggregate in a Lightweight Insulating Concrete: An Innovative Application. ConstructionandBuildingMaterials, 70, 428-438. https://doi.org/10.1016/j.conbuildmat.2014.07.025
[3]
Chabi, E., Lecomte, A., Adjovi, E.C., Dieye, A. and Merlin, A. (2018) Mix Design Method for Plant Aggregates Concrete: Example of the Rice Husk. ConstructionandBuildingMaterials, 174, 233-243. https://doi.org/10.1016/j.conbuildmat.2018.04.097
[4]
Chabi, E., Doko, V., Hounkpè, S.P. and Adjovi, E.C. (2020) Study of Cement Composites on Addition of Rice Husk. CaseStudiesinConstructionMaterials, 12, e00345. https://doi.org/10.1016/j.cscm.2020.e00345
[5]
Atuanya, C.U., Olaitan, S.A., Akagu, C.C., Onukwuli, O.D. and Menkiti, M.C. (2013) Effect of Rice Husk Filler on Mechanical Properties of Polyethylene Matrix Composite. International Journal of Current Research and Review, 5, 111-118.
[6]
Nwanonenyi, S.C. and Obidegwu, M.U. (2012) Analysis of Mechanical Properties of Low Density Polyethylene/Rice-Husk Composite Using Micro Mathematical Model Equations. IOSRJournalofEngineering, 2, 399-407. https://doi.org/10.9790/3021-0203399407
[7]
Farhan Zafar, M. and Siddiqui, M.A. (2018) Raw Natural Fiber Reinforced Polystyrene Composites: Effect of Fiber Size and Loading. MaterialsToday: Proceedings, 5, 5908-5917. https://doi.org/10.1016/j.matpr.2017.12.190
[8]
Zhang, Q., Yi, W., Li, Z., Wang, L. and Cai, H. (2018) Mechanical Properties of Rice Husk Biochar Reinforced High Density Polyethylene Composites. Polymers, 10, Article No. 286. https://doi.org/10.3390/polym10030286
[9]
Dimzoski, B., Bogoeva-Gaceva, G., Gentile, G., Avella, M. and Grozdanov, A. (2009) Polypro-Pylene-Based Eco-Composites Filled with Agricultural Rice Hulls Waste. Chemical and Biochemical Engineering Quarterly, 23, 225-230.
[10]
Toro, P., Quijada, R., Murillo, O. and Yazdani‐Pedram, M. (2004) Study of the Morphology and Mechanical Properties of Polypropylene Composites with Silica or Rice-Husk. PolymerInternational, 54, 730-734. https://doi.org/10.1002/pi.1740
[11]
Chen, R.S., Ahmad, S. and Gan, S. (2016) Rice Husk Bio-Filler Reinforced Polymer Blends of Recycled HDPE/PET: Three‐Dimensional Stability under Water Immersion and Mechanical Performance. PolymerComposites, 39, 2695-2704. https://doi.org/10.1002/pc.24260
[12]
Rajendran Royan, N.R., Sulong, A.B., Yuhana, N.Y., Chen, R.S., Ab Ghani, M.H. and Ahmad, S. (2018) UV/O3 Treatment as a Surface Modification of Rice Husk towards Preparation of Novel Biocomposites. PLOSONE, 13, e0197345. https://doi.org/10.1371/journal.pone.0197345
[13]
Rosa, S.M.L., Nachtigall, S.M.B. and Ferreira, C.A. (2009) Thermal and Dynamic-Mechanical Characterization of Rice-Husk Filled Polypropylene Composites. MacromolecularResearch, 17, 8-13. https://doi.org/10.1007/bf03218594
[14]
Attharangsan, S., Ismail, H., Bakar, M.A. and Ismail, J. (2012) The Effect of Rice Husk Powder on Standard Malaysian Natural Rubber Grade L (SMR L) and Epoxidized Natural Rubber (ENR 50) Composites. Polymer-PlasticsTechnologyandEngineering, 51, 231-237. https://doi.org/10.1080/03602559.2011.625377
[15]
Petchwattana, N., Covavisaruch, S. and Chanakul, S. (2012) Mechanical Properties, Thermal Degradation and Natural Weathering of High Density Polyethylene/rice Hull Composites Compatibilized with Maleic Anhydride Grafted Polyethylene. JournalofPolymerResearch, 19, Article No. 9921. https://doi.org/10.1007/s10965-012-9921-6
[16]
Abdulkareem, S.A. and Adeniyi, A.G. (2018) Tensile and Water Absorbing Properties of Natural Fibre Reinforced Plastic Composites from Waste Polystyrene and Rice Husk. ABUAD Journal of Engineering Research and Development, 1, 199-204.
[17]
Ighalo, J.O., Adeniyi, A.G., Owolabi, O.O. and Abdulkareem, S.A. (2021) Moisture Absorption, Thermal and Microstructural Properties of Polymer Composites Developed from Rice Husk and Polystyrene Wastes. InternationalJournalofSustainableEngineering, 14, 1049-1058. https://doi.org/10.1080/19397038.2021.1892234
[18]
Choi, N., Mori, I. and Ohama, Y. (2006) Development of Rice Husks-Plastics Composites for Building Materials. WasteManagement, 26, 189-194. https://doi.org/10.1016/j.wasman.2005.05.008
[19]
Amadji, T.A., Adjovi, E.C., Gérard, J., Barés, J. and Huon, V. (2021) Étude des propriétés technologiques d’un composite bois-plastique élaboré au Bénin. Bois&ForetsdesTropiques, 348, 49-63. https://doi.org/10.19182/bft2021.348.a36750
[20]
American Society for Testing and Materials (2020) ASTM D1037-12 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials. https://doi.org/10.1520/D1037-12R20
