全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

Formulation of Motor Oil from Blends of Rubber Latex Cup Bottom Oil (RLBO) and Used Frying Oil (UFO)

DOI: 10.4236/jsbs.2024.143003, PP. 35-43

Keywords: Formulation, Oils Blend, Motor Oils, Latex Bottoms Oil

Full-Text   Cite this paper   Add to My Lib

Abstract:

Most motor oils are made from mineral oils derived from petroleum, the reserves of which are limited and exhaustible. The aim of this study is to produce and characterize motor oil formulations based on mixtures of rubber latex cup bottom oil (RLCBO) and used frying oil (UFO). The results show that these formulations have a density between 0.91 and 0.92. These densities evolve linearly with the proportion of cup bottom oil and temperature. Similarly, the kinematic viscosity of the blends follows an exponential relationship with temperature. By plotting the logarithm of these kinematic viscosities against the inverse of the temperature, we were able to determine the activation energy of the various blends and deduce that the formulations behave Newtonian.

References

[1]  Zeghouati, N. and Bedhouche, W. (2018) Caractérisation d’une huile moteur de type SAE 15W40 et étude de sa dégradation. Mémoire de fin de cycle, Béjaia, 71.
[2]  Chen, P., Liu, D., Wang, X., Zhang, Q. and Chu, X. (2023) Rapid Determination of Viscosity and Viscosity Index of Lube Base Oil Based on Near-Infrared Spectroscopy and New Transformation Formula. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 287, Article 122079.
https://doi.org/10.1016/j.saa.2022.122079
[3]  Cui, J., Oberoi, S., Briggs, S. and Goldmints, I. (2016) A Viscosity Modifier Solution to Reconcile Fuel Economy and Durability in Diesel Engines. Tribology International, 101, 43-48.
https://doi.org/10.1016/j.triboint.2016.03.038
[4]  Mangas, I., Sogorb, M.A. and Vilanova, E. (2014) Lubricating Oils. In: Wexler, P., Ed., Encyclopedia of Toxicology, Academic Press, 670-676.
https://doi.org/10.1016/b978-0-12-386454-3.00525-x
[5]  Almeida, A.P.P., de Oliveira, A.P.L.R., Erbetta, C.D.C., de Sousa, R.G., de Souza Freitas, R.F. and e Silva, M.E.S.R. (2014) Rheological Study of Polymers Used as Viscosity Index Improvers for Automotive Lubricant Oils. Journal of Modern Physics, 5, 1085-1093.
https://doi.org/10.4236/jmp.2014.512110
[6]  Ernesto, A. (2014) Lubrification colloïdale de contacts DLC: Du régime stationnaire au régime transitoire: Application à la zone segments-piston-chemise. These de doctorat, Ecole centrale de Lyon.
[7]  Pedrosa, M.M. (2022) Eco Panplas: Mieux recycler les contenants de lubrifiant. Magazine de lOMPI, 2, 7.
[8]  Sönnichsen, N. (2023) Lubricants Demand Worldwide 2022. Statista.
[9]  Ceccaldi, P. (1995) Des lubrifiants respectueux de l’environnement. Biofutur, 1995, 27-30.
https://doi.org/10.1016/0294-3506(95)80174-x
[10]  Pawar, R.V., Hulwan, D.B. and Mandale, M.B. (2022) Recent Advancements in Synthesis, Rheological Characterization, and Tribological Performance of Vegetable Oil-Based Lubricants Enhanced with Nanoparticles for Sustainable Lubrication. Journal of Cleaner Production, 378, Article 134454.
https://doi.org/10.1016/j.jclepro.2022.134454
[11]  ISO 662 (2016) Corps gras d’origines animale et végétale-Détermination de la teneur en eau et en matières volatiles. Normes nationales et documents normatifs nationaux.
[12]  NF EN ISO 6883 (2017) Corps gras d’origines animale et végétale-Détermination de la masse volumique conventionnelle (poids du litre dans l’air). Normes nationales et documents normatifs nationaux.
[13]  DIN 53015 (2019) Viscosimétrie-Mesurage de la viscosité à l’aide du viscosimètre à bille d’Höppler. Normes allemandes DIN.
[14]  ASTM D445 (2019) Méthode d’essai standard pour la viscosité cinématique des liquides transparents et opaques (et calcul de la viscosité dynamique).
[15]  Ferrando, R. and Quan Dien, D. (1958) Valeur alimentaire du sérum de Latex d’hévéa. Revue d’élevage et de médecine vétérinaire des pays tropicaux, 11, 301-304.
https://doi.org/10.19182/remvt.7028
[16]  Nejjar, K. (2011) Etude de la réactivité thermique d’une huile de lubrification des moteurs diesel. Ph.D. These, Université Mohammed V-Agdal faculté des sciences Rabat.
[17]  Mazouzi, R., Khelidj, B., Karas, A. and Kellaci, A. (2014) Régénération des huiles lubrifiantes usagées par processus de traitement à l’acide. Revue des Energies Renouvelables, 17, 631-637.
https://doi.org/10.54966/jreen.v17i4.476
[18]  Kouassi, K.E., Abolle, A., Brou, N.L., Boa, D., Kre, N.R. and Yao, K.B. (2024) Study of the Viscosity and Specific Gravity of the Ternary Used Frying Oil (UFO)-Bioethanol-Diesel System. Journal of Materials Science and Chemical Engineering, 12, 53-66.
https://doi.org/10.4236/msce.2024.124005
[19]  Zhu, Y., Xu, J. and Mortimer, P.E. (2011) The Influence of Seed and Oil Storage on the Acid Levels of Rubber Seed Oil, Derived from Hevea Brasiliensis Grown in Xishuangbanna, China. Energy, 36, 5403-5408.
https://doi.org/10.1016/j.energy.2011.06.054

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133