Influence of Temperature-Dependent Thermophysical Properties of TiO2-SiO2-ZnO-Fe2O3/PAO Tetra-Hybrid Nanofluid along a Vertical Porous Surface with Suction
The significance of the thermophysical properties of Tetra hybrid nanofluid in enhancing heat transmission in various applications like heat exchangers, automobiles, and solar storage cannot be overstated. These features can be tampered with when nanoparticles are been introduced into the base fluid to produce an improved heat carrier fluid for the system. This study investigates the impact of temperature-dependent properties on the movement of TiO2-SiO2-ZnO-Fe2O3/PAO Tetra hybrid nanofluid along a vertical porous surface with suction. The system of governing Partial Differential Equations (PDEs) was formulated and transformed into the system of coupled nonlinear third-order Ordinary Differential Equations (ODEs) by similarity techniques. The resulting ODEs were solved numerically using the shooting method and fourth order Runge-Kutta method with the aid of Maple 18.0 software. Using numerical and statistical methods, the study analyzes velocity, temperature profiles, skin friction coefficient, and Nusselt number. It was found that as the variable thermal conductivity parameter upsurges both the skin friction coefficient and Nusselt number intensify at the rate of 0.011697519 and 8.043581616 respectively. This study underscores the vital role of Tetra hybrid nanofluid’s thermophysical properties in improving heat transmission for diverse appli cations. By manipulating nanoparticles within the base fluid, the heat carrier fluid’s efficiency can be enhanced, critical for industries like automotive and enewable energy. These insights inform the design of more efficient heat exchange systems, advancing sustainability and performance in real-world scenarios.
References
[1]
Sajid, T., Gari, A.A., Jamshed, W., Eid, M.R., Islam, N., Irshad, K., et al. (2023) Case Study of Autocatalysis Reactions on Tetra Hybrid Binary Nanofluid Flow via Riga Wedge: Biofuel Thermal Application. Case Studies in Thermal Engineering, 47, Article ID: 103058. https://doi.org/10.1016/j.csite.2023.103058
[2]
Khan, D., Kumam, P., Watthayu, W. and Jarad, F. (2024) Exploring the Potential of Heat Transfer and Entropy Generation of Generalized Dusty Tetra Hybrid Nanofluid in a Microchannel. Chinese Journal of Physics, 89, 1009-1023. https://doi.org/10.1016/j.cjph.2023.10.006
[3]
Zhao, J., Tian, S., Xie, H. and Zhang, X. (2023) Study of Time-Varying Laws of Stability and Wettability of SiO2-H2O Nanofluids with Different Particle Sizes. Industrial & Engineering Chemistry Research, 62, 13529-13540. https://doi.org/10.1021/acs.iecr.3c02110
[4]
Rashidi, M.M., Alhuyi Nazari, M., Mahariq, I. and Ali, N. (2022) Modeling and Sensitivity Analysis of Thermal Conductivity of Ethylene Glycol-Water Based Nanofluids with Alumina Nanoparticles. Experimental Techniques, 47, 83-90. https://doi.org/10.1007/s40799-022-00567-4
[5]
Wang, X., Song, Y., Li, C., Zhang, Y., Ali, H.M., Sharma, S., Li, R., Yang, M., Gao, T., Liu, M. and Cui, X. (2023). Nanofluids Application in Machining: A Comprehensive Review. The International Journal of Advanced Manufacturing Technology, 131, 3113-3164.
[6]
Ajeeb, W., Thieleke da Silva, R.R.S. and Murshed, S.M.S. (2023) Experimental Investigation of Heat Transfer Performance of Al2O3 Nanofluids in a Compact Plate Heat Exchanger. Applied Thermal Engineering, 218, Article ID: 119321. https://doi.org/10.1016/j.applthermaleng.2022.119321
[7]
Younes, H., Mao, M., Sohel Murshed, S.M., Lou, D., Hong, H. and Peterson, G.P. (2022) Nanofluids: Key Parameters to Enhance Thermal Conductivity and Its Applications. Applied Thermal Engineering , 207, Article ID: 118202. https://doi.org/10.1016/j.applthermaleng.2022.118202
[8]
Tawfik, M.M. (2017) Experimental Studies of Nanofluid Thermal Conductivity Enhancement and Applications: A Review. Renewable and Sustainable Energy Reviews , 75, 1239-1253. https://doi.org/10.1016/j.rser.2016.11.111
[9]
Yasmin, H., Giwa, S.O., Noor, S. and Sharifpur, M. (2023) Thermal Conductivity Enhancement of Metal Oxide Nanofluids: A Critical Review. Nanomaterials, 13, Article 597. https://doi.org/10.3390/nano13030597
[10]
Pavía, M., Alajami, K., Estellé, P., Desforges, A. and Vigolo, B. (2021) A Critical Review on Thermal Conductivity Enhancement of Graphene-Based Nanofluids. Advances in Colloid and Interface Science, 294, Article ID: 102452. https://doi.org/10.1016/j.cis.2021.102452
[11]
Iqbal, M., Kouloulias, K., Sergis, A. and Hardalupas, Y. (2023) Critical Analysis of Thermal Conductivity Enhancement of Alumina-Water Nanofluids. Journal of Thermal Analysis and Calorimetry, 148, 9361-9389. https://doi.org/10.1007/s10973-023-12334-7
[12]
Zhang, Y. and Xu, X. (2020) Predicting the Thermal Conductivity Enhancement of Nanofluids Using Computational Intelligence. Physics Letters A, 384, Article ID: 126500. https://doi.org/10.1016/j.physleta.2020.126500
[13]
Ahmadi, M.H., Mirlohi, A., Alhuyi Nazari, M. and Ghasempour, R. (2018) A Review of Thermal Conductivity of Various Nanofluids. Journal of Molecular Liquids, 265, 181-188. https://doi.org/10.1016/j.molliq.2018.05.124
[14]
Zhou, L., Zhu, J., Zhao, Y. and Ma, H. (2022) A Mo-lecular Dynamics Study on Thermal Conductivity Enhancement Mechanism of Nanofluids—Effect of Nanoparticle Aggregation. International Journal of Heat and Mass Transfer, 183, Article ID: 122124. https://doi.org/10.1016/j.ijheatmasstransfer.2021.122124
[15]
Manjunatha, S., Ammani Kuttan, B., Jayanthi, S., Chamkha, A. and Gireesha, B.J. (2019) Heat Transfer Enhancement in the Boundary Layer Flow of Hybrid Nanofluids Due to Variable Viscosity and Natural Convection. Heliyon, 5, e01469. https://doi.org/10.1016/j.heliyon.2019.e01469
[16]
Patra, A.K., Nayak, M.K. and Misra, A. (2020) Viscosity of Nanofluids—A Review. International Journal of Thermofluid Science and Technology, 7, Article No. 070202. https://doi.org/10.36963/ijtst.2020070202
[17]
Murshed, S.M.S. and Estellé, P. (2017) A State of the Art Review on Viscosity of Nanofluids. Renewable and Sustainable Energy Reviews, 76 , 1134-1152. https://doi.org/10.1016/j.rser.2017.03.113
[18]
Ajala, O.A., Aselebe, L.O. and Ogunwobi, A. (2016) Boundary Layer Flow and Heat Transfer with Variable Viscosity in the Presence of Magnetic Field. Journal of Advances in Mathematics, 12, 6412-6421. https://doi.org/10.24297/jam.v12i7.3874
[19]
Ajala, O.A., Aselebe, L.O., Abimbade, S.F. and Ogunsola, A.W. (2019) Effect of Magnetic Fields on the Boundary Layer Flow of Heat Transfer with Variable Viscosity in the Presence of Thermal Radiation. International Journal of Scientific and Research Publications (IJSRP), 9, 13-19. https://doi.org/10.29322/ijsrp.9.05.2019.p8904
[20]
Lee, K.C., bin Saipolbahri, Z.A., Soleimani, H., Zaid, H.M., Guan, B.H. and Chuan Ching, D.L. (2016) Effect of Zinc Oxide Nanoparticle Sizes on Viscosity of Nanofluid for Application in Enhanced Oil Recovery. Journal of Nano Research, 38, 36-39. https://doi.org/10.4028/www.scientific.net/jnanor.38.36
[21]
Nabil, M.F., Azmi, W.H., Abdul Hamid, K., Mamat, R. and Hagos, F.Y. (2017) An Experimental Study on the Thermal Conductivity and Dynamic Viscosity of TiO2-SiO2 Nanofluids in Water: Ethylene Glycol Mixture. International Communications in Heat and Mass Transfer, 86, 181-189. https://doi.org/10.1016/j.icheatmasstransfer.2017.05.024
[22]
Azmi, W.H., Sharma, K.V., Mamat, R., Najafi, G. and Mohamad, M.S. (2016) The Enhancement of Effective Thermal Conductivity and Effective Dynamic Viscosity of Nanofluids—A Review. Renewable and Sustainable Energy Reviews, 53, 1046-1058. https://doi.org/10.1016/j.rser.2015.09.081
[23]
Selvakumar, R.D. and Wu, J. (2019) A Comprehensive Model for Effective Density of Nanofluids Based on Particle Clustering and Interfacial Layer Formation. Journal of Molecular Liquids, 292, Article ID: 111415. https://doi.org/10.1016/j.molliq.2019.111415
[24]
Hu, Y., Li, Y., Lu, L., Mao, Y. and Li, M. (2020) Natural Convection of Water-Based Nanofluids near the Density Maximum in an Annulus. International Journal of Thermal Sciences, 152, Article ID: 106309. https://doi.org/10.1016/j.ijthermalsci.2020.106309
[25]
Ramprasad, T. and Suresh, A.K. (2023) Absorption of Co2 in Nanofluids: Influence of the Material Density of Nanoparticles and a Correlating Principle. Industrial & Engineering Chemistry Research, 62, 19205-19215. https://doi.org/10.1021/acs.iecr.3c00667
[26]
Chavan, D. and Pise, A. (2019) Experimental Investigation of Effective Viscosity and Density of Nanofluids. Materials Today: Proceedings, 16, 504-515. https://doi.org/10.1016/j.matpr.2019.05.122
[27]
Mondragón, R., Juliá, J.E., Cabedo, L. and Navarrete, N. (2018) On the Relationship between the Specific Heat Enhancement of Salt-Based Nanofluids and the Ionic Exchange Capacity of Nanoparticles. Scientific Reports, 8, Article No. 7532. https://doi.org/10.1038/s41598-018-25945-0
[28]
Adun, H., WoleOsho, I., Okonkwo, E.C., Kavaz, D. and Dagbasi, M. (2021) A Critical Review of Specific Heat Capacity of Hybrid Nanofluids for Thermal Energy Applications. Journal of Molecular Liquids, 340, Article ID: 116890. https://doi.org/10.1016/j.molliq.2021.116890
[29]
Sang, L. and Liu, T. (2017) The Enhanced Specific Heat Capacity of Ternary Carbonates Nanofluids with Different Nanoparticles. Solar Energy Materials and Solar Cells, 169, 297-303. https://doi.org/10.1016/j.solmat.2017.05.032
[30]
Chu, Y., Bashir, S., Ramzan, M. and Malik, M.Y. (2022) Model‐Based Comparative Study of Magnetohydrodynamics Unsteady Hybrid Nanofluid Flow between Two Infinite Parallel Plates with Particle Shape Effects. Mathematical Methods in the Applied Sciences, 46, 11568-11582. https://doi.org/10.1002/mma.8234
[31]
Mahmood, Z., Eldin, S.M., Rafique, K. and Khan, U. (2023) Numerical Analysis of MHD Tri-Hybrid Nanofluid over a Nonlinear Stretching/Shrinking Sheet with Heat Generation/absorption and Slip Conditions. Alexandria Engineering Journal, 76, 799-819. https://doi.org/10.1016/j.aej.2023.06.081
[32]
Babar, H., Sajid, M. and Ali, H. (2019) Viscosity of Hybrid Nanofluids: A Critical Review. Thermal Science, 23, 1713-1754. https://doi.org/10.2298/tsci181128015b
[33]
Paul, A. and Patgiri, B. (2024) Modelling of Silicone Oil–based Casson Hybrid Nanofluid across a Porous Rotating Disk. In: Gupta, R. and Awasthi, M.K., Eds., Modeling and Simulation of Fluid Flow and Heat Transfer, CRC Press, 162-179. https://doi.org/10.1201/9781032712079-11
[34]
Saeed, A., Alghamdi, W., Mukhtar, S., Shah, S.I.A., Kumam, P., Gul, T., et al. (2021) Darcy-Forchheimer Hybrid Nanofluid Flow over a Stretching Curved Surface with Heat and Mass Transfer. PLOS ONE, 16, e0249434. https://doi.org/10.1371/journal.pone.0249434
[35]
Aghakhani, S., Hajat-zadeh Pordanjani, A., Afrand, M., Farsani, A.K., Karimi, N. and Sharifpur, M. (2023) Entropy Generation and Exergy Analysis of Ag-MgO/water Hybrid Nanofluid within a Circular Heatsink with Different Number of Outputs. International Journal of Thermal Sciences, 184, Article ID: 107891. https://doi.org/10.1016/j.ijthermalsci.2022.107891
[36]
Jeelani, M.B. and Abbas, A. (2023) Al2O3-Cu\Ethylene Glycol-Based Magnetohydrodynamic Non-Newtonian Maxwell Hybrid Nanofluid Flow with Suction Effects in a Porous Space: Energy Saving by Solar Radiation. Symmetry, 15, Article 1794. https://doi.org/10.3390/sym15091794
[37]
Nanda, P., Sandeep, N., Sulochana, C. and Ashwinkumar, G.P. (2023) Enhanced Heat Transmission in Methanol-Based AA7072/AA7075 Tangent Hyperbolic Hybrid Nanofluid Flow along a Non-linear Expandable Surface. Numerical Heat Transfer, Part A: Applications, 83, 711-725. https://doi.org/10.1080/10407782.2022.2157916
[38]
Hussain, S.M., Mahat, R., Katbar, N.M., Ullah, I., Varun Kumar, R.S., Prasannakumara, B.C., et al. (2023) Artificial Neural Network Modeling of Mixed Convection Viscoelastic Hybrid Nanofluid across a Circular Cylinder with Radiation Effect: Case Study. Case Studies in Thermal Engineering, 50, Article ID: 103487. https://doi.org/10.1016/j.csite.2023.103487
[39]
Ahmad, S., Ali, K., Ayub, A., Bashir, U., Rashid, F.L., Aryanfar, Y., et al. (2023) Localized Magnetic Fields and Their Effects on Heat Transfer Enhancement and Vortices Generation in Tri-Hybrid Nanofluids: A Novel Investigation. Case Studies in Thermal Engineering, 50, Article ID: 103408. https://doi.org/10.1016/j.csite.2023.103408
[40]
Adnan, Abbas, W., Bani-Fwaz, M.Z. and Kenneth Asogwa, K. (2023) Thermal Efficiency of Radiated Tetra-Hybrid Nanofluid [(Al2O3-CuO-TiO2-Ag)/Water]tetra under Permeability Effects over Vertically Aligned Cylinder Subject to Magnetic Field and Combined Convection. Science Progress, 106, 1-17. https://doi.org/10.1177/00368504221149797
[41]
Paul, A., Patgiri, B. and Sarma, N. (2024) Darcy-forchheimer Flow of Ag-ZnO-CoFe2O4/H2O Casson Ternary Hybrid Nanofluid Induced by a Rotatory Disk with EMHD. International Journal of Ambient Energy, 45, Article ID: 2313697. https://doi.org/10.1080/01430750.2024.2313697
[42]
Paul, A., Patgiri, B. and Sarma, N. (2024) Transformer Oil‐based Casson Ternary Hybrid Nanofluid Flow Configured by a Porous Rotating Disk with Hall Current. ZAMM—Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, 104, e202300704. https://doi.org/10.1002/zamm.202300704
[43]
Khan, D., Hus-sien, M.A., Elsiddieg, A.M.A., Lone, S.A. and Hassan, A.M. (2023) Exploration of Generalized Two-Phase Free Convection Magnetohydrodynamic Flow of Dusty Tetra-Hybrid Casson Nanofluid between Parallel Microplates. Nanotechnology Reviews, 12, Article ID: 20230102. https://doi.org/10.1515/ntrev-2023-0102
[44]
Patgiri, B. and Paul, A. (2024) Inspection of Viscoelastic Ag + Cu + Fe3O4 + Al2O3/Kerosene Oil Tetra-Hybrid Nanofluid Flow across a Stretchable Rotating Disk with Exponentially Varying Viscosity. Journal of Taibah University for Science, 18, Article ID: 2336327.
[45]
Thanh, N.V., Ngoc, N.T.H., Thuy, D.M., Tuynh, L.V., Son, H.H. and Long, N.P. (2023) Highly Improved Dielectric and Thermal Performance of Polyalphaolefin Oil-Based Fluids Using MgO Nanoparticles. Coatings, 13, Article 931. https://doi.org/10.3390/coatings13050931
[46]
Makinde, O.D. and Makinde, A.E. (2023) Thermal Analysis of a Reactive Variable Viscosity TiO2-PAO Nanolubricant in a Microchannel Poiseuille Flow. Micromachines, 14, Article 1164. https://doi.org/10.3390/mi14061164
[47]
Goharzadeh, A., Fatt, Y.Y. and Sangwai, J.S. (2023) Effect of TiO2-SiO2 Hybrid Nanofluids on Enhanced Oil Recovery Process under Different Wettability Conditions. Capillarity, 8, 1-10. https://doi.org/10.46690/capi.2023.07.01
[48]
Zhou, K., Ding, Y., Zhang, L., Wu, H. and Guo, J. (2020) Synthesis of Mesoporous ZnO/TiO2-SiO2 Composite Material and Its Application in Photocatalytic Adsorption Desulfurization without the Addition of an Extra Oxidant. Dalton Transactions, 49, 1600-1612. https://doi.org/10.1039/c9dt04454j
[49]
Borode, A., Tshephe, T., Olubambi, P., Sharifpur, M. and Meyer, J. (2023) Stability and Thermophysical Properties of GNP-Fe2O3 Hybrid Nanofluid: Effect of Volume Fraction and Temperature. Nanomaterials, 13, Article 1238. https://doi.org/10.3390/nano13071238
[50]
Etwire, C.J., Seini, I.Y., Musah, R. and Makinde, O.D. (2018) Combined Effects of Variable Viscosity and Thermal Conductivity on Dissipative Flow of Oil-Based Nanofluid over a Permeable Vertical Surface. Diffusion Foundations, 16, 158-176. https://doi.org/10.4028/www.scientific.net/df.16.158
