|
吸光度定位光度法测定锰铁中的锰
|
Abstract:
在“保持‘人、机、料、法、环’各个影响因素在同批样品测定中同一性”的条件下:1) 制备一个标准样品的“母液”;2) 以“微滴”方式滴取“母液”制备“显色系列”,展现其吸光度值域区间;3) 将被测样品的最高含量匹配吸光度最大值,组建“显色系列”相应的“含量系列”;4) 根据被测样品含量范围,选取“含量系列”中的两个样品,作为“两标准光度法”的两个标准。以其含量最高样品的“母液”用量为准,滴取被测样品的“母液”,作为被测样品并实施测定。此方法简便、高速、高效、环保。“小样本”测定结果的极差R为0.92%,不确定度U95为0.22% (k = 3),相对标准偏差RSD为0.28% (n = 8)。
Under the condition of “maintaining the consistency of various influencing factors of ‘human, machine, material, method, and environment’” in the determination of the same batch of samples: 1) Prepare a “mother liquor” for a standard sample; 2) Drip the “mother liquor” in a “droplet” manner to prepare a “color series” and display its absorbance range; 3) Match the highest content of the tested sample with the maximum absorbance value, and form a “content series” corresponding to the “color series”; 4) Based on the content range of the tested sample, select two samples from the “content series” as the two standards for the “two standard photometry method”. Based on the amount of “mother liquor” used in the sample with the highest content, drop the “mother liquor” of the tested sample as the tested sample and carry out the measurement. The method is simple, fast, efficient, and environmentally friendly. The range R of the “small sample” measurement results is 0.92%, the uncertainty U95 is 0.22% (k = 3), and the relative standard deviation RSD is 0.28% (n = 8).
[1] | 吴诚. 机械工程材料测试手册(化学卷) [M]. 沈阳: 辽宁科学技术出版社, 1996: 1066+1046. |
[2] | 尚庆坤, 崔运成, 赫春香, 等. 分析化学[M]. 北京: 科学出版社, 2014: 201-208. |
[3] | 王玉枝, 张正奇, 宦双燕, 等. 分析化学[M]. 第3版. 北京: 科学出版社, 2016: 186-199. |
[4] | 王文渊, 曲中堂. 分析化学[M]. 北京: 化学工业出版社, 2013: 110-114. |
[5] | 彭晓文, 程玉红. 分析化学[M]. 北京: 中国铁道出版社, 2014: 126-130. |
[6] | 王彤, 段春生. 分析化学[M]. 第2版. 北京: 高等教育出版社, 2013: 237-244. |
[7] | 袁秉鉴, 任屏. 对光度法的几点新认识[J]. 分析化学进展, 2019, 9(2): 132-138. |
[8] | 国家质量监督检验检疫总局. JJF 1001-2011通用计量术语及定义[S]. 北京: 中国质检出版社, 2011. |
[9] | 王冀艳, 刘勉, 赵晓亮, 等. 酸溶-苯基荧光酮光度法测定矿样中钽[J]. 冶金分析, 2017, 37(4): 48-51. |
[10] | 王璇, 金涛, 王浩伟, 等. 紫外分光光度法测定聚硫密封胶中二氧化钛[J]. 化学分析计量, 2017, 26(4): 24-27. |
[11] | 高立红, 周凯红, 王燕霞, 等. 硅钼蓝分光光度法测定氟化稀土中二氧化硅[J]. 冶金分析, 2017, 37(4): 57-61. |
[12] | 邓军华, 王一凌, 亢德华, 等. 二氨替比林甲烷光度法测定含钛物料中二氧化钛[J]. 冶金分析, 2015, 35(10): 30-35. |
[13] | 钟国秀, 黄清华. 光度法快速测定铜合金中微量铝[J]. 化学分析计量, 2011, 20(5): 60-62. |
[14] | 袁秉鉴. “精密度法则”在分光光度法中的作用[J]. 分析化学进展, 2020, 10(1): 1-7. |
[15] | 国家质量监督检验检疫总局. JJF 1059.1-2012测量不确定度评定与表示[S]. 北京: 中国质检出版社, 2012. |