|
|
澳大利亚一钢粉烧结性能研究
|
Abstract:
本研究探讨了澳大利亚一钢粉矿的物理化学特性及其在烧结过程中的性能。通过烧结杯试验，我们评估了不同比例的一钢粉矿替代传统澳洲粉的效果。结果显示，替代FMG粉矿可以显著提高烧结矿的强度并降低燃料消耗，尽管这会导致烧结矿中Al2O3含量的轻微减少。这种替代对烧结生产的总体影响较小，且能满足工业生产的标准。研究结果为优化烧结矿的生产提供了新的视角，并有助于降低成本。
This study explores the physical and chemical properties of Australian YG powder ore and its performance during sintering. We evaluated the effectiveness of replacing traditional Australian powder with different proportions of one steel powder through a sintering cup test. The results showed that replacing FG powder can significantly improve the strength of sintered ore and reduce fuel consumption, although this may lead to a slight decrease in Al2O3 content in sintered ore. This substitution has a relatively small overall impact on sintering production and can meet industrial production standards. The research results provide a new perspective for optimizing the production of sintered ore and help reduce costs.
| [1] | 陈伟, 邢建民, 王凯. 澳大利亚FMG粉矿烧结性能的试验研究[J]. 金属世界, 2007(2): 26-29. |
| [2] | 吕学伟, 郭家宝, 游洋, 等. 铁矿粉烧结制粒过程颗粒行为研究综述[J]. 钢铁研究学报, 2021, 33(10): 1084-1094. https://doi.org/10.13228/j.boyuan.issn1001-0963.20210256 |
| [3] | 吴胜利, 王跃飞, 朱娟. 铁矿粉颗粒特性对其烧结制粒性的影响[J]. 钢铁, 2015, 50(5): 19-25. https://doi.org/10.13228/j.boyuan.issn0449-749x.20140333 |
| [4] | 周文胜, 王梅菊. 改善烧结混合料透气性的途径探析[J]. 冶金与材料, 2021, 41(6): 185-186. |
| [5] | 付壮壮, 韩秀丽, 刘磊, 等. 铁矿粉粒度对烧结基础性能的影响[J]. 华北理工大学学报(自然科学版), 2022, 44(3): 8-14. |
| [6] | 史先菊, 李光强, 刘畅, 等. 烧结用铁矿粉制粒性能影响因素的试验研究[J]. 烧结球团, 2023, 48(4): 30-37+80. https://doi.org/10.13403/j.sjqt.2023.04.051 |
