Oil saturation was an important parameter of reservoir evaluation, which had important guiding significance for oilfield development. In this paper, the oil saturation of tight oil in G area was studied, and the original oil saturation of the study area was studied by using the comprehensive experimental method. The original oil saturation of tight oil in the study area was determined by J function method, rock electricity method and oil-based mud coring method. The results showed that through the comparison of three experimental methods, it could be concluded that the J function method leads to the low value of oil saturation in the study area. The oil-based mud coring method was more suitable for the determination of oil saturation in this area than the other two methods because it needs to meet too many conditions and the calculation results were also low. G area was located in Qili Village, Ordos Basin.
References
[1]
Archie, G. E. (1942). The electrical Resistivity Log as an Aid in Determining Some Reservoir Characteristics. Transactions of the AIME, 146, 54-62. https://doi.org/10.2118/942054-G
[2]
Hu, Y., Yu, X. H., Chen, G. Y., & Li, S. L. (2012). Classification of the Average Capillary Pressure Function and Its Application in Calculating Fluid Saturation. Petroleum Exploration and Development, 39, 778-784. https://doi.org/10.1016/S1876-3804(12)60104-9
[3]
Lyu, M. G., & Bi, H. B. (1996). Initial Oil Saturation Determination by Capillary Pressure Curve. Petroleum Exploration and Development, 23, 63-66.
[4]
Sun, P., Cui, S. T., & Liu, J. Q. (2012). Method of Sealed Coring Saturation Correction Based on Pore Structure. Lithologic Reservoirs, 24, 88-92.
[5]
Wang, N. (2014). Effect of Temperature, Pressure and Salinity on Core Electricity Parameters. Science Technology and Engineering, 14, 141-145.
[6]
Yang, S. L., & Wei, J. Z. (2008). Reservoir Physics. Petroleum Industry Press.
[7]
Yang, S. T., Fan, S. T., Chen, Y. Q. et al. (1990). Method for Calculating Oil and Gas Reserves (pp. 18-62). Petroleum Industry Press.
[8]
Ye, Q., Zha, Y. Q., Li, F. Y. et al. (2016). The Study of a New Method of Calibrating the Sealed Core Saturation. Science Technology and Engineering, 16, 179-184.
[9]
Zhu, J. J. (2003). Relationship between Capillary Pressure Data of Intrusive Mercury Method and Oil Saturation. Petroleum Geology & Oilfield Development in Daqing,22, 32-34.
