|
基于Multisim软件答辩倒计时的设计仿真
|
Abstract:
基于Multisim14软件,本文设计了毕业答辩倒计时提醒电路,实现了在8分钟时间内自动提醒演讲者剩余时间的功能。该电路能够满足答辩时间的精确控制,通过数码管显示剩余时间,并在答辩结束前1分钟或者其他时间和答辩时间结束时发出声音提醒。设计加入了可以在倒计时某个具体的位置进行暂停然后报警以及随时可以复原为初始显示数字的功能。并且可以手动通过拨动拨码器,调节所要倒计时的分钟数。此外显示译码器电路中加逻辑门与其相连,通过小灯和蜂鸣器实现倒计时一分钟与时间截止(00:00)的报警功能。
Based on Multisim14 software, the countdown reminding circuit of graduation defense is designed, which realizes the function of automatically reminding the speaker of the remaining time within 8 minutes. The circuit can meet the precise control of the defense time, display the remaining time through the digital tube, and issue a sound reminder 1 minute before the end of the defense or another time and the end of the defense time. The design has added a function that can pause at a specific position in the countdown and then alarm and can be restored to the initial display number at any time. The number of minutes to be counted can be adjusted manually by flipping the dip switch. In addition, the display decoder circuit is connected to a logic gate, and the alarm function of counting down one minute and time cutoff (00:00) is realized through small lights and buzzers.
[1] | 申莉华, 李晓辉, 任小青, 等. 基于Multisim的计时器设计与仿真[J]. 电子设计工程, 2014, 22(6): 150-152. https://doi.org/10.3969/j.issn.1674-6236.2014.06.046 |
[2] | 黄玮, 周舟, 刘佳如, 等. 具备抢答计时和答题计时功能的智力抢答器电路Multisim设计与仿真实现[J]. 中国高新科技, 2023(7): 128-130. https://doi.org/10.13535/j.cnki.10-1507/n.2023.07.36 |
[3] | 万文, 王炜, 吴敏. 基于Multisim的倒计时电路的设计与改进[J]. 通信电源技术, 2020, 37(15): 55-58. |
[4] | 陈婕羽, 林青彪, 王雪. 基于Multisim的火箭发射30秒倒计时器设计[J]. 电子制作, 2015(10): 7-8. https://doi.org/10.3969/j.issn.1006-5059.2015.10.005 |
[5] | 金子涵, 任致远, 史旭东, 等. 基于Multisim 14仿真设计的多功能数字电子钟[J]. 电子产品世界, 2021, 28(6): 94-97. |
[6] | 杨春兰, 王艳春, 程荣龙, 等. Multisim10在数字电子技术课程设计中的应用[J]. 科技资讯, 2011(2): 166. https://doi.org/10.3969/j.issn.1672-3791.2011.02.135 |
[7] | 李要球, 祝晓凤, 周琳. 基于Multisim7软件的24秒倒计时器的设计与仿真[J]. 高师理科学刊, 2010, 30(2): 59-62. |
[8] | 苟悦宬. 基于Multisim 14.0的多功能数字钟电路虚拟设计[J]. 信息与电脑, 2022, 34(5): 4-6. https://doi.org/10.3969/j.issn.1003-9767.2022.05.002 |
[9] | 黄文锋. 基于74LS192的可倒计时数字钟设计——以Multisim10为例[J]. 湖州职业技术学院学报, 2017, 15(1): 73-76. |
[10] | 张爱雪, 孟樱. Multisim12在24进制计时电路设计教学中的应用[J]. 菏泽学院学报, 2018, 40(2): 120-124. https://doi.org/10.3969/j.issn.1673-2103.2018.02.026 |
[11] | 朱为忠. 基于Multisim10的倒计时电路设计[J]. 课程教育研究, 2012(10): 95-96. |
[12] | 闫佳颖, 刘馨. 基于Multisim软件的数字秒表电路设计[J]. 工程技术研究, 2020, 2(2): 163-164. https://doi.org/10.36012/etr.v2i2.1156 |
[13] | 蔡晓艳, 李小亮, 肜瑶, 等. 基于Multisim交通信号灯控制器的设计与仿真[J]. 黄河科技学院学报, 2023, 25(11): 30-36. https://doi.org/10.19576/j.issn.2096-790X.2023.11.006 |