Agricultural mechanization plays a pivotal role in the transition from subsistence to commercial agriculture, with a particular focus on labour-intensive activities like harvesting. This study assesses the operational characteristics of the BRRI Whole Feed Combine Harvester (Model BRRI WCH2021) at the field level. Developed under the SFMRA project, the harvester’s technical performance and loss assessment were conducted during the Boro 2022 and Aman 2022 seasons in farmer fields in Bangladesh’s Rangpur region. The field efficiency of the harvester was determined to be 62.5% and 57.9% in the Boro and Aman seasons, respectively. Fuel consumption rates were recorded at 2.77 l/ha and 2.31 l/ha for the Boro and Aman seasons. The total harvesting losses, encompassing cutter bar, shatter, cylinder, and separation loss, averaged 0.56% and 0.48% in the Boro and Aman seasons, respectively. Mechanized harvesting with the BRRI Whole Feed Combine Harvester significantly reduced paddy losses by 5.81% compared to manual methods. The field evaluation results indicate the combine harvester’s satisfactory performance, highlighting its potential to alleviate labour demands during peak harvesting. The development of the BRRI WCH offers a sustainable solution for rice harvesting mechanization among progressive farmers. It paves the way for the broader adoption of advanced agricultural technology in Bangladesh.
References
[1]
Kabir, M., Paul, D., Hossain, M. and Rahman, N. (2016) Estimating Area and Production of Rice under Different Crop-Cut Methods in Bangladesh. Bangladesh Rice Journal, 20, 11-16. https://doi.org/10.3329/brj.v20i1.30624
[2]
Kabir, M., Salam, M., Chowdhury, A., Rahman, N., Iftekharuddaula, K., Rahman, M., et al. (2015) Rice Vision for Bangladesh: 2050 and beyond. Bangladesh Rice Journal, 19, 1-18. https://doi.org/10.3329/brj.v19i2.28160
[3]
Gurung, T., Kabir, W. and Bokhtiar, S. (2017) Mechanization for Sustainable Agricultural Intensification in SAARC Region. SAARC Agriculture Centre, Dhaka.
[4]
Nath, B.C., Nam, Y.-S., Huda, M.D., Rahman, M.M., Ali, P. and Paul, S. (2017) Status and Constraint for Mechanization of Rice Harvesting System in Bangladesh. Agricultural Sciences, 8, 492-506. https://doi.org/10.4236/as.2017.86037
[5]
Huda, M.D., Nath, B.C., Paul, S., Bhuiyan, M.G.K., Islam, S. and Islam, M.M. (2019) Design and Development of a Head Feed Mini Combine Harvester Suitable in Bangladesh Condition. Journal of Agricultural Engineering, 42, 73-92.
[6]
Huda, M.D., Bhuiyan, M.G.K., Nath, B.C., Millon, M.K., Islam, S., Paul, H., et al. (2019) Performance Evaluation and Economics of the Reaper Binder for Harvesting Paddy in Bangladesh. Journal of Agricultural Engineering, 42, 61-72.
[7]
Esgici, R., Sessiz, A. and Bayhan, Y. (2016) The Relationship between the Age of Combine Harvester and Grain Losses for Paddy. Mechanization in Agriculture & Conserving of the Resources, 62, 18-21.
[8]
Alizadeh, M.R. and Allameh, A. (2013) Evaluating Rice Losses in Various Harvesting Practices. International Research Journal of Applied and Basic Sciences, 4, 894-901.
[9]
Hossain, M.A., Rahman, H., Ahmmed, M.M., Khan, A.U., Hossen, M.A., Nath, B.C., et al. (2023) Development of a Power Tiller Operated Safe Grain Cleaner. American Journal of Pure and Applied Biosciences, 5, 116-123. https://doi.org/10.34104/ajpab.023.01160123
[10]
Nath, B.C., Paul, S., Huda, M.D., Hossen, M.A., Bhuiyan, M. and Islam, A.S. (2022) Combine Harvester: Small Machine Solves Big Rice Harvesting Problem of Bangladesh. Agricultural Sciences, 13, 201-220. https://doi.org/10.4236/as.2022.132015
[11]
Nath, B.C., Huda, M.D., Rahman, M.M. and Paul, S. (2021) Essential Steps for Developing Rice Harvest Mechanization in Bangladesh. Cutting-Edge Research in Agricultural Sciences, 7, 109-125. https://doi.org/10.9734/bpi/cras/v7/1535F
[12]
Zhang, C.L., Jun, L., Zhang, M.H., Cheng, Y.G., Li, G.M. and Zhang, S.J. (2012) Mechanical Harvesting Effects on Seed Yield Loss, Quality Traits and Profitability of Winter Oilseed Rape (Brassica napus L.). Journal of Integrative Agriculture, 11, 1297-1304. https://doi.org/10.1016/S2095-3119(12)60126-9
[13]
Yousif, L.A. and Babiker, E.H. (2018) Economics of Using Combine Harvesters in the Mechanized Rainfed Schemes of Eastern Sudan. Gezira Journal of Agricultural Science, 16.
[14]
Islam, A.S., Alam, M.A., Ashik-E-Rabbani, M., Bashir, M.S. and Rahman, M.M. (2020) Techno-Economic Feasibility of Zoomlion Combine Harvester in Haor Areas of Bangladesh. Agricultural Sciences, 11, 1170-1185. https://doi.org/10.4236/as.2020.1112077
[15]
Islam, A., Rahman, M., Rahman, A., Islam, M. and Rahman, M. (2016) Techno-Economic Performance of 4-Row Self-Propelled Mechanical Rice Transplanter at Bangladesh Farmers’ Field. Progressive Agriculture, 27, 369-382. https://doi.org/10.3329/pa.v27i3.30834
[16]
Islam, A., Islam, M., Rabbani, M., Rahman, M. and Rahman, A. (2015) Commercial Mechanical Rice Transplanting under Public-Private Partnership in Bangladesh. Journal of Bioscience and Agriculture Research, 6, 501-511. https://doi.org/10.18801/jbar.060115.60
[17]
Hossain, M., Hoque, M., Wohab, M., Miah, M.M. and Hassan, M. (2015) Technical and Economic Performance of Combined Harvester in Farmers Field. Bangladesh Journal of Agricultural Research, 40, 291-304. https://doi.org/10.3329/bjar.v40i2.24569
[18]
Hunt, D. (1995) Farm Power and Machinery Management, Cost Determination. Iowa State University Press, Iowa.
[19]
Nath, B., Hossen, M., Islam, A., Huda, M., Paul, S. and Rahman, M. (2016) Postharvest Loss Assessment of Rice at Selected Areas of Gazipur District. Bangladesh Rice Journal, 20, 23-32. https://doi.org/10.3329/brj.v20i1.30626
[20]
Elsoragaby, S., Yahya, A., Mahadi, M.R., Nawi, N.M. and Mairghany, M. (2019) Comparative Field Performances between Conventional Combine and Mid-Size Combine in Wetland Rice Cultivation. Heliyon, 5. https://doi.org/10.1016/j.heliyon.2019.e01427
[21]
Islam, A.S., Alam, M.A., Kamruzzaman, M., Bhuiyan, M.G.K., Islam, M.M. and Pranto, M.R.B.H. (2021) Business Viability of Small Combine Harvester in Haor Areas. European Journal of Agriculture and Food Sciences, 3, 47-55. https://doi.org/10.24018/ejfood.2021.3.3.290
[22]
Muazu, A., Yahya, A., Ishak, W. and Khairunniza-Bejo, S. (2014) Machinery Utilization and Production Cost of Wetland, Direct Seeding Paddy Cultivation in Malaysia. Agriculture and Agricultural Science Procedia, 2, 361-369. https://doi.org/10.1016/j.aaspro.2014.11.050
[23]
Henrichsmeyer, F., Ohls, J. and Winter, K. (1995) Leistung und Kosten von Arbeitsverfahren in Grossbetrieben (Work Requirement and Costs on Large Farms). Landtechnik, 50, 296-297.
