Since 2015, the Republic of Kazakhstan has a new regulatory framework for construction on the basis of Eurocode. Many new steel quality requirements have been introduced for steel structures. As a result, Kazakhstan’s steel production almost ceased to be used in construction. Therefore, a series of studies is being carried out to determine the quality of local steel for compliance with the requirements of Eurocode 1993. Impact toughness testing was carried out on 126 samples of 8, 10, 20 mm thick structural steel produced by the “Arcelor-Mittal” company. The experimental study of impact toughness of KCV and KCU at a temperature of +20˚, -20˚, -40˚ degrees were conducted for seven types of structural steel, the most common in the Republic of Kazakhstan, on the experimental experimentation facility of the KazRDICA JSC. The ST RK STB EN 10045-1-2012 techniques were used. In each series of tests, 3 specimens were used. It has been established that in all cases the temperature requirements of Eurocode 1993 (National Annex to SP RK EN1993-1-1: 2005/2011*, Table НП.2*) are met. A regression relationship between the values of impact toughness and temperature was constructed. It has been established that construction steel produced in the Republic of Kazakhstan fully complies with the requirements of 1993 Eurocode. The studies on the dependence of Brinell hardness of steel on the impact toughness of steel at specified temperatures are performed. The correlation dependencies between the values of impact toughness and BH Brinell hardness have been obtained.
References
[1]
Davidenkov, N.N. (1936) Dynamic Tests of Metals. Main Edition of Literature on Ferrous Metallurgy, Moscow, 281.
[2]
Gerassimova, L.P., Golubkov, D.Е. and Guk, Y.P. (2007) Standard Quality Control Techniques for Metallic Materials. Intermet Engineering, Moscow, 377.
[3]
Koch, K., Henschel, S. and Krüger, L. (2022) Effect of the Impact Pulse on the Dynamic Fracture Toughness Behavior of High-Strength Steel and Nodular Cast Iron. Procedia Structural Integrity, 42, 506-512. https://doi.org/10.1016/j.prostr.2022.12.064
[4]
Tronskar, J.P., Mannan, M.A. and Lai, M.O. (2002) Measurement of Fracture Initiation Toughness and Crack Resistance in Instrumented Charpy Impact Testing. Engineering Fracture Mechanics, 69, 321-338. https://doi.org/10.1016/S0013-7944(01)00077-7
[5]
Henschel, S. and Krüger, L. (2015) Dynamic Crack Initiation Measurements in a Four-Point Split Hopkinson Bending Device. Engineering Fracture Mechanics, 133, 62-75. https://doi.org/10.1016/j.engfracmech.2015.05.020
[6]
Lorriot, T., (2000) Specimen Loading Determined by Displacement Measurement in Instrumented Charpy Impact Test. Engineering Fracture Mechanics, 65, 703-713. https://doi.org/10.1016/S0013-7944(99)00149-6
[7]
Chen, H.Y., Wang, Y.Z., Fu, C.J., Zhang, T., Luo, C.S. and Wang, B.Z. (2023) Impact Behavior of High-Strength Steel Beam with Circular Web Openings. Journal of Constructional Steel Research, 211, 108159. https://doi.org/10.1016/j.jcsr.2023.108159
[8]
Cui, G.M., Zhai, X.M. and Meng, L.Z. (2023) Behavior of Axially Loaded High-Strength Steel Circular Hollow Section Tubes under Low Velocity Lateral Impact. Thin-Walled Structures, 185, 110595. https://doi.org/10.1016/j.tws.2023.110595
[9]
BS EN 1993-1-12:2007 Eurocode 3: Design of Steel Structures. Part 1-12: Additaional Rules for the Extension of EN 1993 up to Steel Grades s700.
[10]
Kulbayev, B., Lapin, V., Tuleyev, T., Aldakhov, S., Aldakhov, Y. and Ali, A. (2023) Hardness Specification of Structural Steel Used in the Republic of Kazakhstan. E3SWeb of Conferences, 389, 01002. https://doi.org/10.1051/e3sconf/202338901002
[11]
Panteleenko, F.I. and Snarky, A.S. (2010) Methodology of Estimation of Material Condition for Critical Steel Structures. BNTU, Minsk, 196.
[12]
Voronin, L.M. (2005) Instructions for Determining the Mechanical Properties of Metal for Nuclear Power Plant Equipment by Sample less Methods According to the Hardness Properties. RD EO 0027-2005. Federal Agency for Atomic Energy, 47.
[13]
Kurskeev, A.K., Timush, A.V., Shatsilov, V.I., Sydykov, A., Gorbunov, P.N. and Sadykova, A.B. (2000) Seismic Zoning of the Republic of Kazakhstan. Evero, Almaty, 219.
