Impact of Heat Treatments and Hole Density (p) on the Structural, Electrical, and Superconducting Properties of LnSrBaCu3O6+z (Ln = Eu, Sm, Nd) Compounds
In this study, we thoroughly examined the impact of heat treatments and hole count (p) on the properties of LnSrBaCu3O6+z (Ln = Eu, Sm, Nd) compounds. We focused on preparation, X-ray diffraction with Rietveld refinement, AC susceptibility, DC resistivity measurements, and heat treatment effects. Two heat treatment types were applied: oxygen annealing [O] and argon annealing followed by oxygen annealing [AO]. As the rare earth Ln’s ionic radius increased, certain parameters notably changed. Specifically, c parameter, surface area S, and volume V increased, while critical temperature Tc and holes (p) in the CuO2 plane decreased. The evolution of these parameters with rare earth Ln’s ionic radius in [AO] heat treatment is linear. Regardless of the treatment, the structure is orthorhombic for Ln = Eu, tetragonal for Ln = Nd, orthorhombic for Ln = Sm [AO], and pseudo-tetragonal for Sm [O]. The highest critical temperature is reached with Ln = Eu (Tc [AO] = 87.1 K). Notably, for each sample, Tc [AO] surpasses Tc [O]. Observed data stems from factors including rare earth ionic size, improved cationic and oxygen chain order, holes count p in Cu(2)O2 planes, and in-phase purity of [AO] samples. Our research strives to clearly demonstrate that the density of holes (p) within the copper plane stands as a determinant impacting the structural, electrical, and superconducting properties of these samples. Meanwhile, the other aforementioned parameters contribute to shaping this density (p).
References
[1]
Bednorz, J.G. and Müller, K.A. (1986) Possible HighTc Superconductivity in the Ba-La-Cu-O System. Zeitschrift für Physik B Condensed Matter, 64, 189-193. https://doi.org/10.1007/BF01303701
[2]
Wu, M.K., Ashburn, J.R., Torng, C.J., Hor, P.H., Meng, R.L., Gao, L., Huang, Z.J., Wang, Y.Q. and Chu, C.W. (1987) Superconductivity at 93 K in a New Mixed-Phase Y-Ba-Cu-0 Compound System at Ambient Pressure. Physical Review Letters, 58, 908-910. https://doi.org/10.1103/PhysRevLett.58.908
[3]
Zhang, H. and Sato, H. (1993) Universal Relationship between Tc and the Hole Content in p-Type Cuprate Superconductors. Physical Review Letters, 70, 1697-1699. https://doi.org/10.1103/PhysRevLett.70.1697
[4]
Liang, R., Bonn, D.A. and Hardy, W.N. (2006) Evaluation of CuO2 Plane Hole Doping in YBa2Cu3O6+x Single Crystals. Physical Review B, 73, Article ID: 180505.
[5]
Reichardt, S., et al. (2018) Bulk Charge Ordering in the CuO2 Plane of the Cuprate Superconductor YBa2Cu3O6.9 by High-Pressure NMR. Condensed Matter, 3, Article No. 23. https://doi.org/10.3390/condmat3030023
[6]
Hücker, M., et al. (2014) Competing Charge, Spin, and Superconducting Orders in Underdoped YBa2Cu3Oy. Physical Review B, 90, Article ID: 054514.
[7]
Wang, X.Z., et al. (1992) Crystal Structure and Superconductivity in REBaSrCu3Ox. Physica C: Superconductivity, 200, 12-16. https://doi.org/10.1016/0921-4534(92)90316-5
[8]
Sedky, A. and Youssif, M.I. (2016) Structural and Fluctuation Induced Excess Conductivity in R:1113 Superconductors. Brazilian Journal of Physics, 46, 198-205. https://doi.org/10.1007/s13538-016-0401-z
[9]
Awana, V.P.S., et al. (2000) Strong Dependence of Superconducting Transition Temperature (Tc) on the Rare Earth Ionic Size in REBaSrCu3O7 (RE = Y, Dy, Nd and La) Series. Modern Physics Letters B, 14, 361-372. https://doi.org/10.1142/S0217984900000471
[10]
Bellioua, M., Nafidi, A., Elkaaouachi, A., Nafidi, A. and Suryanarayanan, R. (2002) Enhancement of Orthorhombicity, Tc, Shielding and Irreversibility Line in Argon Preheated Sm(SrBa)Cu3O6+z. Physica C: Superconductivity, 383, 183-190. https://doi.org/10.1016/S0921-4534(02)01323-0
[11]
Rietveld, H.M. (1969) A Profile Refinement Method for Nuclear and Magnetic Structures. Journal of Applied Crystallography, 2, 65-71. https://doi.org/10.1107/S0021889869006558
[12]
Van der Pauw, L.J. (1958) A Method of Measuring the Resistivity and Hall Coefficient on Lamellae of Arbitrary Shape. Philips Technical Review, 20, 220-224.
[13]
Hellebrand, B., Gunasekaran, R., Steger, P. and Bäuerle, D. (1997) Structural and Superconducting Properties of Oxygen-Deficient GdBaSrCu3Ox (6.5 < x < 7.0). Applied Physics A, 65, 235-240. https://doi.org/10.1007/s003390050572
[14]
Almessiere, M.A., et al. (2020) Dimensionality and Superconducting Parameters of YBa2Cu3O7-d/(WO3 NPs)x Composites Deduced from Excess Conductivity Analysis. Materials Chemistry and Physics, 243, Article ID: 122665. https://doi.org/10.1016/j.matchemphys.2020.122665
[15]
Slimania, Y., et al. (2019) Improvement of Flux Pinning Ability by Tungsten Oxide Nanoparticles Added in YBa2Cu3Oy Superconductor. Ceramics International, 45, 6828-6835. https://doi.org/10.1016/j.ceramint.2018.12.176
[16]
Bellioua, M., et al. (2017) Effect of the Number of Holes Psh and Heat Treatments on the Critical Temperature Tc in High Tc Superconductors. International Journal of Engineering Research & Technology, 6, 393-398.
[17]
Sederholm, L., et al. (2021) Extremely Overdoped Superconducting Cuprates via High Pressure Oxygenation Methods. Condensed Matter, 6, Article No. 50. https://doi.org/10.3390/condmat6040050
[18]
Cyr-Choiniere, O., et al. (2015) Two Types of Nematicity in the Phase Diagram of the Cuprate Superconductor YBa2Cu3Oy. Physical Review B, 92, Article ID: 224502. https://doi.org/10.1103/PhysRevB.92.224502
[19]
Sato, Y., et al. (2017) Thermodynamic Evidence for a Nematic Phase Transition at the Onset of the Pseudogap in YBa2Cu3Oy. Nature Physics, 13, 1074-1078. https://doi.org/10.1038/nphys4205
[20]
Kistenmacher, T.J. (1988) Mapping the Orthorhombic-to-Tetragonal Transition at Ambient Temperature in YBa2Cu3Oy Ceramics. Journal of Applied Physics, 64, 5067-5070. https://doi.org/10.1063/1.342462
[21]
Benzi, P., Bottizzo, E. and Rizzi, N. (2004) Oxygen Determination from Cell Dimensions in YBCO Superconductors. Journal of Crystal Growth, 269, 625-629. https://doi.org/10.1016/j.jcrysgro.2004.05.082
[22]
Dzul-Kifli, N.A.C., et al. (2022) Superconducting Properties of YBa2Cu3O7−δ with a Multiferroic Addition Synthesized by a Capping Agent-Aided Thermal Treatment Method. Nanomaterials, 12, Article No. 3958. https://doi.org/10.3390/nano12223958
[23]
Zhao, R., Li, W., et al. (2014) Precise Tuning of (YBa2Cu3O7−δ)1−x:(BaZrO3)x Thin Film Nanocomposite Structures. Advanced Functional Materials, 24, 5240-5245. https://doi.org/10.1002/adfm.201304302
[24]
Heinmaa, I., Lütgemeier, H., Pekker, S., Krabbes, G. and Buchgeister, M. (1992) Copper NMR and NQR in YBa2Cu3Ox and GdBa2Cu3Ox with x between 6 and 7. A Study of the Oxygen Ordering. Applied Magnetic Resonance, 3, 689-709. https://doi.org/10.1007/BF03166290
[25]
Milic, M., Matic, V.M. and Lazarov, N. (2011) The Dependence of Critical Temperature on Oxygen Concentration in YBa2Cu3O6+x in Terms of the Fragmented Chain Model. European Journal of Physics, 9, 690-697. https://doi.org/10.2478/s11534-010-0060-6
[26]
Casalta, H., et al. (1996) Neutron-Scattering Determination of the Structural Parameters versus Oxygen Content of YBa2Cu306+x Single Crystals. Physica C: Superconductivity, 258, 321-330. https://doi.org/10.1016/0921-4534(95)00674-5
[27]
Sahoo, B., Routray, K.L., Panda, B., Samal, D. and Behera, D. (2019) Excess Conductivity and Magnetization of CoFe2O4 Combined with Y1Ba2Cu3O7−δ as a Superconductor. Journal of Physics and Chemistry of Solids, 132, 187-196. https://doi.org/10.1016/j.jpcs.2019.04.035
[28]
Loudhaief, N., Salem, M.B., Labiadh, H. and Zouaoui, M. (2020) Electrical Properties and Fluctuation Induced Conductivity Studies of Bi-Based Superconductors Added by CuS Nanoparticles Synthesized Through the Aqueous Route. Materials Chemistry and Physics, 242, Article ID: 122464. https://doi.org/10.1016/j.matchemphys.2019.122464
[29]
Hannachi, E., et al. (2021) Preparation and Characterization of High-Tc (YBa2Cu3O7−δ)1−x/(CNTs)x Superconductors with Highly Boosted Superconducting Performances. Ceramics International, 47, 23539-23548. https://doi.org/10.1016/j.ceramint.2021.05.071
[30]
Trabaldo, E., et al. (2022) Mapping the Phase Diagram of a YBa2Cu3O7−δ Nanowire Through Electromigration. Physical Review Applied, 17, Article ID: 024021. https://doi.org/10.1103/PhysRevApplied.17.024021
[31]
Chen, Y.-J., et al. (2013) Superconducting Fluctuations and the Nernst Effect in High-Tc Superconductors. Superconductor Science and Technology, 26, Article ID: 105029. https://doi.org/10.1088/0953-2048/26/10/105029
[32]
Aliyev, V.M., Selim-Zade, R.I., Ragimov, J.A., Omelchenko, L.V. and Petrenko, E.V., et al. (2020) Analysis of Fluctuation Conductivity in Y1−хCdxBa2Cu3O7−δ (x=0 - 0.4). Low Temperature Physics, 46, 901-909. https://doi.org/10.1063/10.0001712
[33]
Jurelo, A.R., Costa, R.M., Júnior, P.R. and Serbena, F.C. (2010) Fluctuation Conductivity and Phase Separation in Polycrystalline Y1−xCexBa2Cu3O7−δ Superconductors. Journal of Superconductivity and Novel Magnetism, 23, 247-252. https://doi.org/10.1007/s10948-009-0522-5
[34]
Masnita, M.J., Awang, R. and Abd-Shukor, R. (2022) AC Susceptibility and Electrical Properties of PbS added Bi1.6Pb0.4Sr2CaCu2O8 Superconductor. Sains Malaysiana, 51, 315-328. https://doi.org/10.17576/jsm-2022-5101-26
