|
响应面分析法优化纳米TiO2光催化降解刚果红的研究
|
Abstract:
利用高温煅烧的方法合成了纳米TiO2,使用响应面法研究其在不同条件下光催化降解刚果红的活性。通过单因素实验来研究其中的主要影响因素,利用响应面法对主要影响因素进行分析和优化,得到最佳期望值。通过实验数据分析,构建了二次多项式函数模型。预测最佳反应条件为:CR的初始浓度为17.954 mg/L,TiO2的加入量8.219 mg,光照时间139 min,CR的降解率为86.93%。
Nano-TiO2 was synthesized by calcination at high temperature and its photocatalytic degradation activity of Congo red was studied by response surface method under different conditions. The main influencing factors were studied by single factor experiment, and the response surface method was used to analyze and optimize the main influencing factors, and the best-expected value was obtained. Through the analysis of experimental data, a quadratic polynomial function model was constructed. The optimal reaction conditions were as follows: the initial concentration of CR was 17.954 mg/L, the additional amount of TiO2 was 8.219 mg, the illumination time was 139 min, and the degradation rate of CR was 86.93%.
[1] | 周文琪. 脉冲电解法处理刚果红废水的降解及其机理研究[D]: [硕士学位论文]. 武汉: 华中科技大学, 2015. |
[2] | 马晓佳, 唐学静, 靳凤先, 等. 二氧化钛基材料光催化降解VOCs的研究进展[J]. 工程科学学报, 2023, 45(4): 590-601. |
[3] | 张秋云, 王丹丹, 余荣菲, 等. TiO2@UiO-66复合材料的制备及光催化降解有机染料[J]. 贵州大学学报(自然科学版), 2023, 40(3): 18-24. |
[4] | 李宁, 张伟, 李贵贤, 等. TiO2光催化剂的研究进展[J]. 精细化工, 2021, 38(11): 2181-2188, 2258. |
[5] | 陈晓彤, 黄立萍, 孙谧, 等. 响应面分析法优化α-环糊精的酶转化工艺[J]. 渔业科学进展, 2018, 39(5): 143-151. |
[6] | 罗中旭, 赖金龙, 罗学刚. 基于响应面分析的辉光等离子体解离CO2的工艺参数优化[J]. 西南科技大学学报, 2023, 38(1): 31-39. |
[7] | 孙作正. 响应面法优化制备硅铝质低碳胶凝材料[J]. 信息记录材料, 2023, 24(4): 58-61. |
[8] | 叶锦莎, 刘瑞森, 骆欣. 响应面法优化生物炭的制备及对镉的吸附[J]. 山东化工, 2023, 52(5): 26-30, 39. |
[9] | 姜沛汶, 李晗晟, 邓天天, 等. 响应面法优化制备La-Biochar复合材料及其对As(Ⅲ)的吸附研究[J]. 河南理工大学学报(自然科学版), 2023, 42(1): 76-86. |
[10] | 李金英, 朱琳, 孔祥权, 等. 响应面优化C掺杂TiO2制备及光催化降解甲基橙[J]. 环境科学与技术, 2018, 41(11): 105-109. |
[11] | 朱琳, 孔祥权, 任百祥. 响应面法优化C改性TiO2磁性光催化剂的制备及其光降解甲基橙[J]. 化工新型材料, 2020, 48(4): 269-273. |
[12] | 吴智君, 罗洁, 欧安琪, 等. 响应面法优化Fe/TiO2纳米管阵列的制备及其光催化性能研究[J]. 功能材料, 2021, 52(8): 8199-8205. |