|
|
交联型光敏聚合物的全息光学压力传感性能研究
|
Abstract:
本文制备了菲醌(PQ)掺杂聚甲基丙烯酸甲酯与甲基丙烯酸月桂酯共聚基底(MMA-co-LMA)光敏聚合物，这是一种具有弹性恢复能力的交联型聚合物材料。实验研究了新型聚合物的全息性能，测量了短曝光条件下全息光栅衍射效率随时间的演变。改变MMA共聚单体分子的掺杂率作为主要参数来评价全息性能的提高，实验结果表明MMA的最佳质量百分比为7.5wt%，衍射效率的最大值可以达到55%。应用该新型材料采用全息干涉方式记录全息体光栅，并将其作为传感响应单元进行压力传感测试，实验证明了以该材料研制全息压力传感器的可行性及应用潜力。本文研究的全息性能优化与压力传感实验结果为开发全息压力传感器提供了重要的实验基础。
This article prepared a photosensitive polymer based on poly (methyl methacrylate) and laury l methacrylate copolymer (MMA co LMA) doped with phenanthraquinone (PQ), which is a cross- linked polymer material with elastic recovery ability. The holographic performance of the novel polymer was experimentally studied, and the evolution of holographic grating diffraction efficiency over time was measured un-der short exposure conditions. The improvement of holographic performance was evaluated by changing the doping rate of MMA comonomer molecules as the main parameter. The experimental results showed that the optimal mass percentage of MMA was 7.5wt%, and the maximum diffrac-tion efficiency could reach 55%. The application of this new material uses holographic interferome-try to record holographic volume gratings, and uses them as sensing response units for pressure sensing testing. The experiment proves the feasibility and application potential of developing holo-graphic pressure sensors using this material. The holographic performance optimization and pres-sure sensing experimental results studied in this article provide an important experimental basis for the development of holographic pressure sensors.
| [1] | Liu, H., Sun, G.J., Li, M.L., Li, L., Zhang, J.T., Tai, H.D. and Yu, D. (2023) Temperature Effects on Axial Dispersion in a Photopolymer-Based Holographic Lens. Applied Optics, 62, 1475-1482. https://doi.org/10.1364/AO.482792 |
| [2] | Yetisen, A.K., Naydenova, I., Vasconcellos, F.C., Blyth, J. and Lowe, C.R. (2014) Holographic Sensors: Three-Dimen- sional Analyte-Sensitive Nanostructures and Their Applications. Chemical Reviews, 114, 10654-10696.
https://doi.org/10.1021/cr500116a |
| [3] | Dan, Y., He, Y., Liu, H., Wang, B., Li, L., Wang, R. and Luo, S.H. (2020) Characterizing the Bending Deformation of Polymer Utilizing the Diffraction Spectrum of a Holographic Grating on a Flexible Substrate. Optics Letters, 45, 579- 582. https://doi.org/10.1364/OL.374653 |
| [4] | Cody, D. (2015) Low-Toxicity Diacetone Acrylamide-Based Photopolymer for Applications in Holography. Dublin Institute of Technol-ogy. |
| [5] | Jang, C., Lee, C., Jeong, J., Li, G., Lee, S., Yeom, J., Hong, K. and Lee, B. (2016) Recent Progress in See-Through Three- Dimensional Displays Using Holographic Optical Elements. Applied Optics, 55, A71-A85.
https://doi.org/10.1364/AO.55.000A71 |
| [6] | Yetisen, A.K., Butt, H., Vasconcellos, F., Montelongo, Y., Davidson, C., Blyth, J., Chan, L., Bryan Carmody, J., Vignolini, S., Steiner, U., Baumberg, J.J., Wilkinson, T.D. and Lowe, C.R. (2014) Light-Directed Writing of Chemically Tunable Narrow-Band Holographic Sensors. Advanced Optical Materials, 2, 250-254. https://doi.org/10.1002/adom.201300375 |
| [7] | Veniaminov, A.V. and Mahilny, U.V. (2013) Holo-graphic Polymer Materials with Diffusion Development: Principles, Arrangement, Investigation, and Applications. Optics and Spectroscopy, 115, 906-930.
https://doi.org/10.1134/S0030400X13120199 |
| [8] | Steckman, G.J., Solomatine, I., Zhou, G. and Psaltis, D. (1998) Characterization of Phenanthrenequinone-Doped Poly (Methyl Methacrylate) for Holographic Memory. Optics Letters, 23, 1310-1312. https://doi.org/10.1364/OL.23.001310 |
| [9] | Lin, S.H., Hsu, K.Y., Chen, W.Z. and Whang, W.T. (2000) Phenanthrenequinone-Doped Poly (Methyl Methacrylate) Photopolymer Bulk for Volume Holographic Data Storage. Optics Letters, 25, 451-453.
https://doi.org/10.1364/OL.25.000451 |
| [10] | Mihaylova, E., Cody, D., Naydenova, I., Martin, S. and Toal, V. (2014) Diacetone Acrylamide Based Pressure Sensitive Photopolymer. US Patent GB1411640.4. |
| [11] | Martin, S., Feely, C. and Toal, V. (1997) Holographic Recording Characteristics of an Acrylamide-Based Photopolymer. Applied Optics, 36, 5757-5768. https://doi.org/10.1364/AO.36.005757 |
| [12] | Wang, M., Bu, F., Zhou, C., Zhou, Q., Wei, T., Liu, J. and Zhai, W. (2020) Bonding Performance and Mechanism of a Heat-Resistant Composite Precursor Adhesive (RT-1000？C) for TC4 Titanium Alloy. Journal of Micromechanics and Molecular Physics, 5, 1-25. https://doi.org/10.1142/S2424913020500162 |
| [13] | Yu, D., Liu, H., Jiang, Y. and Sun, X. (2011) Mutual Diffusion Dynamics with Nonlocal Response in SiO2 Nanoparticles Dispersed PQ-PMMA Bulk Photopolymer. Optics Express, 19, 13787-13792.
https://doi.org/10.1364/OE.19.013787 |
| [14] | Veniaminov, A.V. and Sedunov, Y.N. (1996) Diffusion of Phenan-threnequinone in Poly(Methyl Methacrylate): Holographic Measurements. Polymer Science, Series A, 38, 56-63. |
