|
|
骨材料钻削状态监测平台设计与研究
|
Abstract:
开发一种骨材料钻削状态监测平台，提取钻削过程的钻削力及振动信号。基于骨材料钻削过程的信号特征，将骨材料钻削过程划分为五个阶段，探究不同进给速度和转速对钻削过程钻削力的影响。研究得出在同一进给速度下，钻削过程钻削力随着主轴转速的增大而减小，在同一转速下，钻削过程钻削力随着进给速度的增大而增大的普适性结论。
A platform for monitoring drilling conditions of bone materials was developed to extract drilling force and vibration signals during drilling. Based on the signal characteristics of bone material drilling process, the bone material drilling process was divided into five stages, and the influence of different feed speeds and rotational speeds on the drilling force during the drilling process was explored. It is concluded that under the same feed speed, the drilling force decreases with the increase of spindle speed, and under the same speed, the drilling force increases with the increase of feed speed.
| [1] | 王成勇, 陈志桦, 陈华伟, 等. 生物骨材料切除理论研究综述[J]. 机械工程学报, 2021, 57(11): 2-32. |
| [2] | Birkenfeld, F., Becker, M.E., Harder, S., et al. (2012) Increased Intraosseous Temperature Caused by Ultrasonic Devices during Bone Surgery and the Influences of Working Pressure and Cooling Irrigation. The International Journal of Oral & Maxillofacial Implants, 27, 1382-1388. |
| [3] | Mauermann, W.J., Sampathkumar, P. and Thompson, R.L. (2008) Sternal Wound Infections. Best Practice & Research Clinical Anaesthesiology, 22, 423-436. https://doi.org/10.1016/j.bpa.2008.04.003 |
| [4] | Natali, C., Ingle, P. and Dowell, J. (1996) Orthopaedic Bone Drills—Can They Be Improved Temperature Changes Near the Drilling Face. Journal of Bone & Joint Surgery-British Volume, 78, 357-362.
https://doi.org/10.1302/0301-620X.78B3.0780357 |
| [5] | Izamshah, R., Noorazizi, M.S., Kasim, M.S., et al. (2016) Influence of Orthopaedic Drilling Parameters on Surface Roughness and Cutting Force of Bone Drilling Process. Proceedings of the International Conference on Electronics, Mechanics, Culture and Medicine, 235-247. https://doi.org/10.2991/emcm-15.2016.114 |
| [6] | 宋少康, 程祥, 郑光明, 等. 医疗骨钻削关键参数仿真与优化研究[J]. 现代制造工程, 2020(11): 73-78. |
| [7] | 顾春玉, 钱炜. 钻削参数对皮质骨钻削力的影响及预测[J]. 软件工程师, 2021, 24(12): 7-11. |
| [8] | Bayraktar, H.H., Morgan, E.F., Niebur, G.L., et al. (2004) Comparison of the Elastic and Yield Properties of Human Femoral Trabecular and Cortical Bone Tissue. Journal of Biomechanics, 37, 27-35.
https://doi.org/10.1016/S0021-9290(03)00257-4 |
| [9] | Morgan, E.F., Bayraktar, H.H. and Keaveny, T.M. (2003) Trabecular Bone Modulus-Density Relationships Depend on Anatomic Site. Journal of Biomechanics, 36, 897-904. https://doi.org/10.1016/S0021-9290(03)00071-X |
| [10] | Oyen, M.L. and Ko, C.C. (2007) Examination of Local Variations in Viscous, Elastic, and Plastic Indentation Responses in Healing Bone. Journal of Materials Science: Materials in Medicine, 18, 623-628.
https://doi.org/10.1007/s10856-007-2311-7 |
| [11] | William, R.B., Joseph, J.C., Margaret, H., et al. (2014) Comparison of Immature Porcine and Human Bone Mineral Density about the Knee: Implications for Graft Pullout Studies. Current Orthopaedic Practice, 25, 147-152.
https://doi.org/10.1097/BCO.0000000000000080 |
