In order to solve the problem of asymmetric large deformation of high-stress soft rock crossing roadway under complex geological conditions in deep mines, taking the 2# total return airway of 76.2# section of Wuyang Coal Mine as the engineering background, the causes of asymmetric deformation and failure of soft rock crossing roadway in deep mines were summarized and analyzed by means of field investigation, theoretical analysis and numerical simulation, and the asymmetric high-efficiency support technology with large row spacing was studied. The results show that the lithology of roadway strata is the main cause of asymmetric deformation and failure of roadway. The shape change of roadway is not the main influencing factor of asymmetric deformation of roadway, but for the control of roadway surrounding rock, the straight wall semi-circular arch roadway is better than the rectangular roadway. The field industrial test shows that after adopting the new support design scheme, the displacement of the roof and floor of the roadway is reduced by 86.39% compared with the original support design scheme, and the displacement of the two sides of the roadway is reduced by 86.05% compared with the original support design scheme, which can ensure the normal and safe production of the roadway during the service period, and provide reference for the support design of other similar geological conditions.
References
[1]
Kang, H.P. (2021) 70 Years of Development and Prospect Of Surrounding Rock Control Technology in Coal Mine Roadway in China. Journal of Rock Mechanics and Engineering, No. 1, 1-30.
[2]
Hou, C.J., Wang, X.Y., Bai, J.B., Meng, N.K. and Wu, W.D. (2021) Basic Theory and Technology of Surrounding Rock Stability Control in Deep Roadway. Journal of China University of Mining and Technology, No. 1, 1-12.
[3]
Huang, Q.X. (2021) Study on Coordinated Control of Internal and External Bearing Capacity of Typical Deep Roadway Surrounding Rock in Pingdingshan Mining Area. Doctoral Dissertation, China University of Mining and Technology, Xuzhou.
https://kns.cnki.net/KCMS/detail/detail.aspx?dbname=CDFDLAST2022&filename=1021773585.nh
[4]
Yu, C.S., Wei, S.J., Zhang, S., Wang, M. and Shen, W.L. (2021) Failure Characteristics and Strong Anchoring Control Technology of Surrounding Rock in Deep Coal Seam Roadway. Journal of Henan University of Technology (Natural Science Edition), No. 4, 28-37.
[5]
Wang, J., Guo, Z.B., Cai, F., Hao, Y.X. and Liu, X. (2014) Research on Asymmetric Deformation Mechanism and Control Countermeasures of Deep Cross-Layer Roadway. Journal of Mining and Safety Engineering, No. 1, 28-33.
[6]
Huang, K.J., Li, L., Liu, W.J., Wang, P. and Wang, W.Q. (2014) Numerical Simulation Analysis of Failure Mechanism and Support Stability of Cross-Layer Inclined Roadway in High Stress Soft Rock Area. Mining Safety and Environmental Protection, No. 2, 35-40.
[7]
Hao, Y.X., Wang, J., Wang, H., Meng, Z.G. and Guo, Z.B. (2016) Coupling Control Measures of Anchor, Mesh and Cable in Deep Fault Fracture Zone through Layer Soft Rock Roadway. Journal of Mining and Safety Engineering, No. 2, 231-237.
[8]
Meng, Q.B., Han, L.J., et al. (2017) Research and Application of Coupling Support Effect of Deep High Stress Soft Rock Roadway. Geotechnical Mechanics, No. 5, 1424-1435 + 1444.
[9]
Sun, S.Y., Zhao, C.Z., et al. (2020) Study on Deformation Characteristics and Repair and Reinforcement Technology of Surrounding Rock of Cross-Layer Roadway in Multi-Coal Seam Repeated Mining. Journal of Mining and Safety Engineering, No. 4, 681-688.
[10]
Zhang, T.L., Ning, S. and Zhang, C. (2021) Subsection Support Technology of Surrounding Rock in Coal Seam Floor Crossing Roadway. Mining Research and Development, No. 10, 115-120.
