|
|
基于泰森多边形的仿生多孔结构设计方法
|
Abstract:
本研究采用泰森多边形原理设计了仿生多孔结构，利用参数化方法获得了联通多孔模型，实现了与骨缺损形状匹配的自由几何构造。与此同时，围绕孔隙率、孔径、孔棱直径、比表面积四个参数开展了设计参数与几何参数之间的关联探究，为实际工程应用提供了一定的理论依据。基于该方法生成的不规则多孔模型可通过增材制造、立体成像等技术进行3D打印。
In this study, the Voronoi Diagram principle was used to design a bionic porous structure, and a parametric method was used to obtain a linked porous model to achieve a free geometric configura-tion matching the shape of the bone defect. At the same time, the correlation between the design parameters and geometric parameters was explored around four parameters: porosity, pore diam-eter, pore prism diameter, and specific surface area, which provided some theoretical basis for practical engineering applications. The irregular porous models generated based on this method can be 3D printed by additive manufacturing and stereo imaging technologies.
| [1] | Collins, M.N., Ren, G., Young, K., et al. (2021) Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering. Advanced Functional Materials, 31, Article ID: 2010609.
https://doi.org/10.1002/adfm.202010609 |
| [2] | Jodati, H., Y？lmaz, B. and Evis, Z. (2020) A Review of Bioceramic Porous Scaffolds for Hard Tissue Applications: Effects of Structural Features. Ceramics International, 46, 15725-15739.
https://doi.org/10.1016/j.ceramint.2020.03.192 |
| [3] | Tu, H.-L., Zhao, H.-B., Fan, Y.-Y., et al. (2022) Recent Develop-ments in Nonferrous Metals and Related Materials for Biomedical Applications in China: A Review. Rare Metals, 41, 1410-1433.
https://doi.org/10.1007/s12598-021-01905-y |
| [4] | Gomez, S., Vlad, M.D., Lopez, J., et al. (2016) Design and Properties of 3D Scaffolds for Bone Tissue Engineering. Acta Biomaterialia, 42, 341-350. https://doi.org/10.1016/j.actbio.2016.06.032 |
| [5] | Fantini, M., Curto, M. and De Crescenzio, F. (2016) A Method to De-sign Biomimetic Scaffolds for Bone Tissue Engineering Based on Voronoi Lattices. Virtual and Physical Prototyping, 11, 77-90.
https://doi.org/10.1080/17452759.2016.1172301 |
| [6] | Li, J., Cui, X., Hooper, G.J., et al. (2020) Rational Design, Bio-Functionalization and Biological Performance of Hybrid Additive Manufactured Titanium Implants for Orthopaedic Appli-cations: A Review. Journal of the Mechanical Behavior of Biomedical Materials, 105, Article ID: 103671. https://doi.org/10.1016/j.jmbbm.2020.103671 |
| [7] | Volker, W., Jan, W., Harald, H., et al. (2016) Specific Yielding of Se-lective Laser-Melted Ti6Al4V Open-Porous Scaffolds as a Function of Unit Cell Design and Dimensions. Metals—Open Ac-cess Metallurgy Journal, 6, 166.
https://doi.org/10.3390/met6070166 |
| [8] | Hollister, S.J. and Kikuchi, N. (1994) Homogenization Theory and Digital Im-aging: A Basis for Studying the Mechanics and Design Principles of Bone Tissue. Biotechnology and Bioengineering, 43, 586-596.
https://doi.org/10.1002/bit.260430708 |
| [9] | Salgado, A.J., Coutinho, O.P. and Rui, L.R. (2004) Bone Tissue Engineering: State of the Art and Future Trends. Macromolecular Bioscience, 4, 743-765. https://doi.org/10.1002/mabi.200400026 |
| [10] | Camron, H.U., et al. (1976) The Rate of Bone Ingrowth into Porous Metal. Journal of Biomedical Materials Research, 102, 295-302. https://doi.org/10.1002/jbm.820100210 |
| [11] | Cornell, C.N. (1999) Osteoconductive Materials and Their Role as Substitutes for Autogenous Bone Grafts. Orthopedic Clinics of North America, 30, 591-598. https://doi.org/10.1016/S0030-5898(05)70112-7 |
| [12] | Stamboulis, A.G., Boccaccini, A.R. and Hench, L.L. (2002) Novel Biodegradable Polymer/Bioactive Glass Composites for Tissue Engineering Applications. Advanced Engineering Materials, 4, 105-109.
https://doi.org/10.1002/1527-2648(200203)4:3<105::AID-ADEM105>3.0.CO;2-L |
| [13] | Kawai, T., Yamada, T., Yasuka-wa, A., et al. (2009) Biological Fixation of Fibrous Materials to Bone Using Chitin/Chitosan as a Bone Formation Accelerator. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 88B, 264-270. https://doi.org/10.1002/jbm.b.31177 |
| [14] | Matena, J., Petersen, S., Gieseke, M., et al. (2015) SLM Produced Porous Tita-nium Implant Improvements for Enhanced Vascularization and Osteoblast Seeding. International Journal of Molecular Sciences, 16, 7478-7492.
https://doi.org/10.3390/ijms16047478 |
| [15] | Hollister, S.J., Levy, R.A., Chu, T., et al. (2000) An Image-Based Approach for Designing and Manufacturing Craniofacial Scaffolds. International Journal of Oral & Maxillofacial Surgery, 29, 67-71.
https://doi.org/10.1034/j.1399-0020.2000.290115.x |
| [16] | Wettergreen, M.A., Bucklen, B.S., Sun, W., et al. (2005) Com-puter-Aided Tissue Engineering of a Human Vertebral Body. Annals of Biomedical Engineering, 33, 1333-1343. https://doi.org/10.1007/s10439-005-6744-1 |
| [17] | Van Cleynenbreugel, T., Schrooten, J., Van Oosterwyck, H., et al. (2006) Micro-CT-Based Screening of Biomechanical and Structural Properties of Bone Tissue Engineering Scaffolds. Medical and Bi-ological Engineering and Computing, 44, 517-525. https://doi.org/10.1007/s11517-006-0071-z |
| [18] | Liu, Y.J., Li, X.P., Zhang, L.C., et al. (2015) Processing and Properties of Topologically Optimised Biomedical Ti- 24Nb-4Zr-8Sn Scaffolds Man-ufactured by Selective Laser Melting. Materials Science & Engineering A, 642, 268-278.
https://doi.org/10.1016/j.msea.2015.06.088 |
| [19] | Yang, N., Gao, L. and Zhou, K. (2015) Simple Method to Generate and Fabricate Stochastic Porous Scaffolds. Materials Science & Engineering C—Materials for Biological Applications, 56, 444-450.
https://doi.org/10.1016/j.msec.2015.06.039 |
| [20] | Almeida, H. and Bártolo, P. (2010) Virtual Topological Optimisation of Scaffolds for Rapid Prototyping. Medical Engineering & Physics, 32, 775-782. https://doi.org/10.1016/j.medengphy.2010.05.001 |
| [21] | Pattanayak, D.K., Fukuda, A., Matsushita, T., et al. (2011) Bioac-tive Ti Metal Analogous to Human Cancellous Bone: Fabrication by Selective Laser Melting and Chemical Treatments. Acta Biomaterialia, 7, 1398-1406.
https://doi.org/10.1016/j.actbio.2010.09.034 |
| [22] | Zhang, X.Y., et al. (2017) Yield Properties of Closed-Cell Aluminum Foam under Triaxial Loadings by a 3D Voronoi Model. Mechanics of Materials, 104, 73-84. https://doi.org/10.1016/j.mechmat.2016.10.007 |
