Modeling of a DVB-S2 Transmission Chain with Optimization of Adjustment Parameters for a Good Quality of the Reception Signal

Digital television is part of our daily lives. We took an interest in the DVB-S2 standard in particular, because it is the one that governs the transmission by satellite of multimedia content from television programs. With ever-changing user needs, there are new challenges that the DVB-S2 standard is no longer able to meet due to errors caused by weather and hardware limitations. The main purpose of a satellite TV transmission is to obtain a video signal in reception of the best possible quality and at a high bit rate. It is therefore important to determine all the factors which could intervene in the process of transmission and which have a negative impact on the yield at the reception of the signal. We therefore designed and simulated the DVB-S and DVB-S2 transmission chains with QPSK modulation (and an FEC coding rate of 1/2), on MATLAB software (Simulink), and with an AWGN channel for the sake of comparison performance between these two chains. Then we carried out the design of the DVB-S2 transmission chain with an RF (Radio Frequency) satellite channel, by materializing all the elements which intervene in the downlink to evaluate the performance of this chain according to the factors which influence and/or degrade the signal quality between transmission and reception at the receiving earth station. The main results obtained relate to the DVB-S2 transmission chain and were interpreted using the visualization of the error rate blocks: With an AWGN channel, increasing the signal-to-noise ratio decreases the rate of erroneous packets and therefore improves the quality of the received signal. With an RF satellite channel on the downlink: increasing the transmit power improves the receive performance, this is useful for correcting most RF imperfections; having larger parabolic antennas is an advantage because they have greater gains; this makes it possible to minimize the rate of erroneous packets. These simulations allowed us to determine the precise and numerical impact of RF degradations on the performance of the downlink DVB-S2 transmission chain.